1. Metabolic Enzyme/Protease
  2. Adiponectin Receptor
  3. AdipoRon

AdipoRon is an orally active adiponectin receptor (AdipoR) agonist, binding to AdipoR1 and AdipoR2 with Kds of 1.8 and 3.1 μM, respectively.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

AdipoRon 構造式

AdipoRon 構造式

CAS 番号 : 924416-43-3

容量 価格(税別) 在庫状況 数量
無料サンプル (0.1 - 0.5 mg)   今すぐ申し込む  
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
USD 67 在庫あり
Solution
10 mM * 1 mL in DMSO USD 67 在庫あり
Solid
5 mg USD 39 在庫あり
10 mg USD 61 在庫あり
25 mg USD 143 在庫あり
50 mg USD 231 在庫あり
100 mg   お問い合わせ  
200 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 22 publication(s) in Google Scholar

Other Forms of AdipoRon:

Top Publications Citing Use of Products

    AdipoRon purchased from MedChemExpress. Usage Cited in: J Neurotrauma. 2019 Mar 19;36(6):903-918.  [Abstract]

    WT macrophages are incubated with myelin debris for 3 hours to obtain mye-MΦ, and further treated with AdipoRon for another 48 hours. ABCA1 and ABCG1 levels are assessed by western blot.

    AdipoRon purchased from MedChemExpress. Usage Cited in: J Biol Chem. 2018 Apr 20;293(16):6064-6074.  [Abstract]

    Interaction of APPL1sv with adiponectin receptors in cells. Mouse hepatocytes are serum-starved for 4 h and treated with or without 50 μM AdipoRon (Ad) for 0, 5, or 10 min.
    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    AdipoRon is an orally active adiponectin receptor (AdipoR) agonist, binding to AdipoR1 and AdipoR2 with Kds of 1.8 and 3.1 μM, respectively.

    IC50 & Target

    Kd: 1.8 μM (AdipoR1), 3.1 μM (AdipoR2)[1]

    体外実験

    AdipoRon is an orally active and specific AdipoR agonist, binds to AdipoR1 and AdipoR2, with Kds of 1.8 and 3.1 μM. AdipoRon (50 nM-50 μM) increases AMPK phosphorylation via AdipoR1[1]. AdipoRon (50 μM) dose-dependently attenuates the expression of TNF-α and TGF-β1 in the L02 cells. AdipoRon exhibits significant and dosage-dependent growth suppression on macrophages[2]. AdipoRon treatment significantly improves cardiac functional recovery after reperfusion, and inhibits post-MI apoptosis[3]. AdipoRon exerts vasodilation by mechanisms distinct to adiponectin and induces vasorelaxation without a marked decrease in VSMC [Ca2+]i[4].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    体内実験

    AdipoRon (50 mg/kg, i.v.) cuases significant phosphorylation of AMPK in skeletal muscle and liver of wild-type mice but not Adipor1−/− Adipor2−/− double-knockout mice[1]. AdipoRon (0.02, 0.1, and 0.5 mg/kg, i.g.) alleviates D-GalN induced hepatotoxicity in mice, and prevents hepatic architecture distortion against D-GalN challenge. The hepatoprotective potential of AdipoRon is particularly evident in higher dosages (0.1 and 0.5 mg/kg)[2]. Enhanced cardiomyocyte apoptosis in APN-deficient mice is rescued by AdipoRon (50 mg/kg, p.o.) administration. Antiapoptotic effect of AdipoRon is attenuated but not lost in AMPK-DN mice[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    分子量

    428.52

    分子式

    C27H28N2O3

    CAS 番号
    Appearance

    Solid

    Color

    Off-white to light yellow

    SMILES

    O=C(NC1CCN(CC2=CC=CC=C2)CC1)COC3=CC=C(C(C4=CC=CC=C4)=O)C=C3

    輸送条件

    Room temperature in continental US; may vary elsewhere.

    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 62.5 mg/mL (145.85 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    H2O : < 0.1 mg/mL (insoluble)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.3336 mL 11.6681 mL 23.3361 mL
    5 mM 0.4667 mL 2.3336 mL 4.6672 mL
    10 mM 0.2334 mL 1.1668 mL 2.3336 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  5% DMSO    40% PEG300    5% Tween-80    50% Saline

      Solubility: ≥ 2.5 mg/mL (5.83 mM); Clear solution

    • Protocol 2

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.08 mg/mL (4.85 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.94%

    参考文献
    細胞実験
    [2]

    The effects of AdipoRon on the proliferation of parenchymal and non-parenchymal hepatocytes are evaluated in vitro via L02 and RAW264.7, by MTT assay as described with slight modification: 100 μL cells suspension (6×104/mL) are seeded in a 96-well plate and incubated for 18 h. Fresh media with AdipoRon are added at specified concentrations, and the incubations continue for a further 24 h. Then cells are incubated for 4 h with 0.5 mg/mL of MTT, and analyzed in a microplate reader at 490 nm. Each group is performed in six replications. The mean absorbance values corrected for a blank (medium only) are calculated as percentages of survival[2].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    動物実験
    [2]

    Mice[2]
    After 3 days of acclimation, mice are randomLy divided into six groups (9 mice in each): control, model, bicyclol (20 mg/kg), AdipoRon (0.02 mg/kg, 0.1 mg/kg, 0.5 mg/kg). The synthetic AdipoRon and bicyclol are dissolved in DMSO and diluted by saline containing 0.5% sodium carboxymethyl cellulose (CMC-Na) [final vehicle: 5% DMSO (v/v) saline solution]. All test groups are administered with vehicle (control and model groups) or therapeutic agents (bicyclol or AdipoRon groups) at a dosing volume of 10 mL/kg, by intragastric (i.g.) gavage twice per day for three consecutive days prior to D-GalN administration. 2 h after last treatment, mice are challenged with a single intraperitoneal (i.p.) administration of D-GalN saline solution at a dose of 600 mg/kg to induce acute liver injury, while the control group mice receive saline instead. Then mice are fasted for 20 h before orbital blood collection. Finally, all animals are sacrificed by cervical dislocation, and livers are harvested for biochemical or histopathology analysis[2].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.3336 mL 11.6681 mL 23.3361 mL 58.3403 mL
    5 mM 0.4667 mL 2.3336 mL 4.6672 mL 11.6681 mL
    10 mM 0.2334 mL 1.1668 mL 2.3336 mL 5.8340 mL
    15 mM 0.1556 mL 0.7779 mL 1.5557 mL 3.8894 mL
    20 mM 0.1167 mL 0.5834 mL 1.1668 mL 2.9170 mL
    25 mM 0.0933 mL 0.4667 mL 0.9334 mL 2.3336 mL
    30 mM 0.0778 mL 0.3889 mL 0.7779 mL 1.9447 mL
    40 mM 0.0583 mL 0.2917 mL 0.5834 mL 1.4585 mL
    50 mM 0.0467 mL 0.2334 mL 0.4667 mL 1.1668 mL
    60 mM 0.0389 mL 0.1945 mL 0.3889 mL 0.9723 mL
    80 mM 0.0292 mL 0.1459 mL 0.2917 mL 0.7293 mL
    100 mM 0.0233 mL 0.1167 mL 0.2334 mL 0.5834 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    AdipoRon Related Classifications

    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

     

    タイトル

    お名前 *

     

    PC 用メールアドレス *

    電話番号 *

     

    勤務先/学校名 *

    Department *

     

    カスタマ需要量 *

    国会或いは地域 *

         

    必ず会社名を記載ください。個人への返信は行いません。

    メッセージ

    バルクお問い合わせ

    Inquiry Information

    製品名:
    AdipoRon
    製品番号:
    HY-15848
    数量:
    MCE 日本正規代理店: