BRD0705
Based on 1 publication(s) in Google Scholar
BRD0705 is a potent, paralog selective and orally active GSK3α inhibitor with an IC50 of 66 nM and a Kd of 4.8 μM. BRD0705 displays increased selectivity for GSK3α (8-fold) versus GSK3β (IC50 of 515 nM). BRD0705 can be used for acute myeloid leukemia (AML) research.
For research use only. We do not sell to patients.
- Purity: 99.86%
- CAS No.: 2056261-41-5
- Formula: C20H23N3O
- Molecular Weight:321.42
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) BRD0705
More
Biological Activity
|
GSK3α 66 nM (IC50) |
GSK3α 4.8 μM (Kd) |
GSK-3β(WT) 515 nM (IC50) |
BRD0705 displays excellent selectivity in a penal of 311 kinases, the CDK family of kinases (CDK2, 3 and 5) are next most potently inhibits at values of 6.87 μM, 9.74 μM and 9.20 μM (87-fold, 123-fold and 116-fold selectivity relative to GSK3α)[1].
?
BRD0705 (10-40 μM; 2-24 hours; U937 cells) treatment impairs GSK3α Tyr279 phosphorylation in a time-and concentration-dependent manner without affecting GSK3β Tyr216 phosphorylation[1].
?
Using a β-catenin dependent TCF/LEF luciferase reporter assay, the absence of β-catenin induced target activation after treatment with BRD0705 in AML cell lines[1].
?
BRD0705 impairs AML colony formation in all six tested cell lines, MOLM13, TF-1, U937, MV4-11, HL-60 and NB4, in a concentration-dependent manner, as opposed to BRD3731 which impairs colony formation in TF-1 while increasing colony forming ability in the MV4-11 cell line[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:U937 cells
-
Concentration:10 μM, 20 μM and 40 μM
-
Incubation Time:2 hours, 4 hours, 8 hours and 24 hours
-
Result:Impaired GSK3α Tyr279 phosphorylation in a time-and concentration-dependent manner without affecting GSK3β Tyr216 phosphorylation.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:8-week-old male NSG mice injected with MLL-AF9 AML cells[1]
-
Dosage:30 mg/kg
-
Administration:Oral gavage; twice daily
-
Result:Mice survival was significantly improved.
Chemical Information
-
CAS No. 2056261-41-5
-
Appearance Solid
-
Molecular Weight 321.42
-
Formula C20H23N3O
-
Color White to light yellow
-
SMILES
O=C1C2=C(N=C3C([C@]2(CC)C4=CC=CC=C4)=CNN3)CC(C)(C)C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 300 mg/mL (933.36 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 7.5 mg/mL (23.33 mM); Clear solution
This protocol yields a clear solution of ≥ 7.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (75.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (281 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1112 mL | 15.5560 mL | 31.1119 mL | 77.7798 mL |
| 5 mM | 0.6222 mL | 3.1112 mL | 6.2224 mL | 15.5560 mL | |
| 10 mM | 0.3111 mL | 1.5556 mL | 3.1112 mL | 7.7780 mL | |
| 15 mM | 0.2074 mL | 1.0371 mL | 2.0741 mL | 5.1853 mL | |
| 20 mM | 0.1556 mL | 0.7778 mL | 1.5556 mL | 3.8890 mL | |
| 25 mM | 0.1244 mL | 0.6222 mL | 1.2445 mL | 3.1112 mL | |
| 30 mM | 0.1037 mL | 0.5185 mL | 1.0371 mL | 2.5927 mL | |
| 40 mM | 0.0778 mL | 0.3889 mL | 0.7778 mL | 1.9445 mL | |
| 50 mM | 0.0622 mL | 0.3111 mL | 0.6222 mL | 1.5556 mL | |
| 60 mM | 0.0519 mL | 0.2593 mL | 0.5185 mL | 1.2963 mL | |
| 80 mM | 0.0389 mL | 0.1944 mL | 0.3889 mL | 0.9722 mL | |
| 100 mM | 0.0311 mL | 0.1556 mL | 0.3111 mL | 0.7778 mL |