AQX-016A
Based on 1 Customer Validation
AQX-016A is an orally active and potent SHIP1 agonist. AQX-016A can activate recombinant SHIP1 enzyme in vitro and stimulate SHIP1 activity. AQX-016A also can inhibit the PI3K pathway and TNFa production, can be useful for various inflammatory diseases research.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.51%
- CAS 番号: 849669-54-1
- 分子式: C22H32O2
- 分子量:328.49
-
保管条件:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
生物活性
|
CD40 |
PI3K |
AQX-016A (5 μg/mL, 30 min) inhibits the PI3K-mediated increase in intracellular PIP3 levels, and reduces PIP3 levels through activation of a 5 'phosphatase enzyme[1].
AQX-01 6A (0-5 μg/mL, 30 min) inhibits LPS-induced PKB phosphorylation in a SHIP dependent manner[1].
AQX-016A (0-5 μg/mL, 2 h) significantly inhibits TNFa in both J774 and peritoneal macrophages at both 1 and 5 μg/mL[1].
AQX-016A (0-6 μg/mL, 30 min) requires SHIP to maximally inhibit TNFa production in BMDM, selectively inhibits TNF production from SHIP1+/+ but not SHIP1-/- macrophages[1].
AQX-016A (0-5 μg/mL, 0-90 min) inhibits TNFa translation[1].
AQX-016A (0-15 μM, 30 min) increases SHIP1 enzyme activity in vitro and in intact cells, inhibits macrophage and mast-cell activation[2].
AQX-016A (15 μM, 30 min) inhibits immune cell activation, and inhibits PI3K-dependent macrophage and mast-cell responses in a SHIP-dependent manner[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:SHIP1+/+ and SHIP1-/- mast cells[2]
-
Concentration:0, 3, 6, 15, 30 μM
-
Incubation Time:30 min
-
Result:Inhibited PIP3-regulated intracellular signal transduction events in SHIP-expressing hematopoietic cells, but not in SHIP-deficient hematopoietic or nonhematopoietic cells. Preferentially inhibited, in a dose-dependent manner, LPS-stimulated PKB phosphorylation in SHIP1+/+ but not in SHIP1-/-macrophages, and inhibited the phosphorylation of PKB, p38MAPK and extracellular signal-regulated kinase (ERK) in SHIP1+/+ but not in SHIP1-/- mast cells.
化学情報
-
CAS 番号 849669-54-1
-
性状 Solid
-
分子量 328.49
-
分子式 C22H32O2
-
Color Off-white to light brown
-
SMILES
OC1=C(O)C2=C(C(C)=C1)[C@]3(C)CC[C@](C(C)(C)CCC4)([H])[C@@]4(C)[C@@]3([H])C2
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
溶剤 & 溶解度
DMSO : 100 mg/mL (304.42 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 66 mg/mL (200.92 mM; Need ultrasonic and warming)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.61 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (278 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 3.0442 mL | 15.2212 mL | 30.4423 mL | 76.1058 mL |
| 5 mM | 0.6088 mL | 3.0442 mL | 6.0885 mL | 15.2212 mL | |
| 10 mM | 0.3044 mL | 1.5221 mL | 3.0442 mL | 7.6106 mL | |
| 15 mM | 0.2029 mL | 1.0147 mL | 2.0295 mL | 5.0737 mL | |
| 20 mM | 0.1522 mL | 0.7611 mL | 1.5221 mL | 3.8053 mL | |
| 25 mM | 0.1218 mL | 0.6088 mL | 1.2177 mL | 3.0442 mL | |
| 30 mM | 0.1015 mL | 0.5074 mL | 1.0147 mL | 2.5369 mL | |
| 40 mM | 0.0761 mL | 0.3805 mL | 0.7611 mL | 1.9026 mL | |
| 50 mM | 0.0609 mL | 0.3044 mL | 0.6088 mL | 1.5221 mL | |
| 60 mM | 0.0507 mL | 0.2537 mL | 0.5074 mL | 1.2684 mL | |
| 80 mM | 0.0381 mL | 0.1903 mL | 0.3805 mL | 0.9513 mL | |
| 100 mM | 0.0304 mL | 0.1522 mL | 0.3044 mL | 0.7611 mL |