TPO-L
Based on 1 Customer Validation
TPO-L is a photoinitiator for the 3D printing of resin that promotes two-photon induced polymerization. The two-photon absorption cross-section spectrum of Lucirin TPO-L shows a maximum of 1.2 GM at 610 nm. Despite its small two-photon absorption cross-section, Lucirin TPO-L exhibits high polymerization quantum yields.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.77%
- CAS 番号: 84434-11-7
- 分子式: C18H21O3P
- 分子量:316.33
-
保管条件:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
生物活性
Preparation for TPO-L solution:[1]
Lucirin TPO-L/ethanol solution with concentrations of 7×10−3 and 9×10−1 M.
TPO-L fpr 3D Printing of Resin:[2]
For printing, 50 g of Cubiflow with 1.18 wt % TPO-L as photoinitiator and 0.05 wt % UV-1995 as UV-Vis absorber were prepared. Curing was done with an intensity of 4 mW cm−2 and 40 s exposure per layer. The layer height was set to 50 µm. The specimens were oriented flat on the XY-plane and printed without support structures. One set was post-cured for 300 s in the UV flood curing system, and the other set was used as printed (green).
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 84434-11-7
-
性状 Liquid (Density: 1.14±0.1 g/cm3)
-
分子量 316.33
-
分子式 C18H21O3P
-
Color Light yellow to brown
-
SMILES
O=C(P(OCC)(C1=CC=CC=C1)=O)C2=C(C)C=C(C)C=C2C
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
溶剤 & 溶解度
DMSO : ≥ 175 mg/mL (553.22 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
純度とドキュメンテーション
-
データシート (275 KB)
-
SDS (537 KB)
- English - EN (537 KB)
- Français - FR (537 KB)
- Deutsch - DE (537 KB)
- Norwegian - NO (537 KB)
- Español - ES (537 KB)
- Swedish - SV (537 KB)
- Italian - IT (537 KB)
- Korean - KR (537 KB)
- Portuguese - PT (537 KB)
-
取扱説明書 (2659 KB)
参考文献
[2]. Steyrer B, et al. Visible Light Photoinitiator for 3D-Printing of Tough Methacrylate Resins. Materials (Basel). 2017 Dec 19;10(12):1445. [Content Brief]
[3]. Kim GT, et al. Cytotoxicity, Colour Stability and Dimensional Accuracy of 3D Printing Resin with Three Different Photoinitiators. Polymers (Basel). 2022 Feb 28;14(5):979. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1613 mL | 15.8063 mL | 31.6126 mL | 79.0314 mL |
| 5 mM | 0.6323 mL | 3.1613 mL | 6.3225 mL | 15.8063 mL | |
| 10 mM | 0.3161 mL | 1.5806 mL | 3.1613 mL | 7.9031 mL | |
| 15 mM | 0.2108 mL | 1.0538 mL | 2.1075 mL | 5.2688 mL | |
| 20 mM | 0.1581 mL | 0.7903 mL | 1.5806 mL | 3.9516 mL | |
| 25 mM | 0.1265 mL | 0.6323 mL | 1.2645 mL | 3.1613 mL | |
| 30 mM | 0.1054 mL | 0.5269 mL | 1.0538 mL | 2.6344 mL | |
| 40 mM | 0.0790 mL | 0.3952 mL | 0.7903 mL | 1.9758 mL | |
| 50 mM | 0.0632 mL | 0.3161 mL | 0.6323 mL | 1.5806 mL | |
| 60 mM | 0.0527 mL | 0.2634 mL | 0.5269 mL | 1.3172 mL | |
| 80 mM | 0.0395 mL | 0.1976 mL | 0.3952 mL | 0.9879 mL | |
| 100 mM | 0.0316 mL | 0.1581 mL | 0.3161 mL | 0.7903 mL |
TPO-L 関連分類
HY-W017894 関連分類
Powered by Bioz