Neuraminidase-IN-1
Based on 1 Customer Validation
Neuraminidase-IN-1 is a neuraminidase inhibitor, with an IC50 of 0.21 μM. Neuraminidase-IN-1 has excellent activity against H1N1 influenza virus.
For research use only. We do not sell to patients.
- Purity: 98.93%
- CAS No.: 2379438-80-7
- Formula: C14H11N3O6
- Molecular Weight:317.25
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
IC50: 0.21 μM (neuraminidase)[1]
Neuraminidase-IN-1 has good inhibitory effect on the A/WSN/33H1N1 virus strains, with low toxicity and good druggability[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2379438-80-7
-
Appearance Solid
-
Molecular Weight 317.25
-
Formula C14H11N3O6
-
Color Light yellow to yellow
-
SMILES
O=C(N/N=C/C1=CC=C(O)C([N+]([O-])=O)=C1)C2=CC(O)=CC(O)=C2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 125 mg/mL (394.01 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.08 mg/mL (6.56 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.08 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.1521 mL | 15.7604 mL | 31.5209 mL | 78.8022 mL |
| 5 mM | 0.6304 mL | 3.1521 mL | 6.3042 mL | 15.7604 mL | |
| 10 mM | 0.3152 mL | 1.5760 mL | 3.1521 mL | 7.8802 mL | |
| 15 mM | 0.2101 mL | 1.0507 mL | 2.1014 mL | 5.2535 mL | |
| 20 mM | 0.1576 mL | 0.7880 mL | 1.5760 mL | 3.9401 mL | |
| 25 mM | 0.1261 mL | 0.6304 mL | 1.2608 mL | 3.1521 mL | |
| 30 mM | 0.1051 mL | 0.5253 mL | 1.0507 mL | 2.6267 mL | |
| 40 mM | 0.0788 mL | 0.3940 mL | 0.7880 mL | 1.9701 mL | |
| 50 mM | 0.0630 mL | 0.3152 mL | 0.6304 mL | 1.5760 mL | |
| 60 mM | 0.0525 mL | 0.2627 mL | 0.5253 mL | 1.3134 mL | |
| 80 mM | 0.0394 mL | 0.1970 mL | 0.3940 mL | 0.9850 mL | |
| 100 mM | 0.0315 mL | 0.1576 mL | 0.3152 mL | 0.7880 mL |