Selenocystamine dihydrochloride
Based on 1 publication(s) in Google Scholar
Selenocystamine dihydrochloride is a selenocysteine derivative that can be used in the synthesis of other active compounds. Selenocystamine dihydrochloride can also induce the aggregation of amphiphilic p-sulfonatocalixarene to form supramolecular nanoparticles.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 99.63%
- CAS No.: 3542-13-0
- 화학식: C4H14Cl2N2Se2
- 분자량:318.99
-
보관:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Selenocystamine dihydrochloride
More
Biological Activity
Selenocystamine dihydrochloride can be used to modify hyaluronic acid to construct redox-sensitive hydrogels[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 3542-13-0
-
Appearance Solid
-
분자량 318.99
-
화학식 C4H14Cl2N2Se2
-
Color Light brown to brown
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Small
Homocysteine-Responsive Covalent Organic Frameworks as Signaling Scaffolds: Modulating Transsulfuration for Depression Treatment. [Abstract]2025 Jun;21(23):e2501944. PMID: 40245113
용액&용해도
DMSO : 80 mg/mL (250.79 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 35 mg/mL (109.72 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.84 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.84 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
순도&문서
-
Data Sheet (271 KB)
-
SDS (789 KB)
- English - EN (789 KB)
- Français - FR (789 KB)
- Deutsch - DE (789 KB)
- Norwegian - NO (789 KB)
- Español - ES (789 KB)
- Swedish - SV (789 KB)
- Italian - IT (789 KB)
- Korean - KR (789 KB)
- Portuguese - PT (789 KB)
-
Handling Instructions (2659 KB)
References
[1]. Zhuang J, et al. Homocysteine-Responsive Covalent Organic Frameworks as Signaling Scaffolds: Modulating Transsulfuration for Depression Treatment. Small. 2025 Jun;21(23):e2501944. [Content Brief]
[3]. Lu X, et al. Redox-sensitive hydrogel based on hyaluronic acid with selenocystamine cross-linking for the delivery of Limosilactobacillus reuteri in a DSS-induced colitis mouse model. Int J Biol Macromol. 2024 Sep;276(Pt 2):133855. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.1349 mL | 15.6745 mL | 31.3489 mL | 78.3724 mL |
| 5 mM | 0.6270 mL | 3.1349 mL | 6.2698 mL | 15.6745 mL | |
| 10 mM | 0.3135 mL | 1.5674 mL | 3.1349 mL | 7.8372 mL | |
| 15 mM | 0.2090 mL | 1.0450 mL | 2.0899 mL | 5.2248 mL | |
| 20 mM | 0.1567 mL | 0.7837 mL | 1.5674 mL | 3.9186 mL | |
| 25 mM | 0.1254 mL | 0.6270 mL | 1.2540 mL | 3.1349 mL | |
| 30 mM | 0.1045 mL | 0.5225 mL | 1.0450 mL | 2.6124 mL | |
| 40 mM | 0.0784 mL | 0.3919 mL | 0.7837 mL | 1.9593 mL | |
| 50 mM | 0.0627 mL | 0.3135 mL | 0.6270 mL | 1.5674 mL | |
| 60 mM | 0.0522 mL | 0.2612 mL | 0.5225 mL | 1.3062 mL | |
| 80 mM | 0.0392 mL | 0.1959 mL | 0.3919 mL | 0.9797 mL | |
| 100 mM | 0.0313 mL | 0.1567 mL | 0.3135 mL | 0.7837 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Selenocystamine dihydrochloride Related Classifications
HY-W105804 Related Classifications
Powered by Bioz