Pinostrobin chalcone
Based on 1 Customer Validation
Pinostrobin chalcone is found to be potent natural cytotoxic compounds against MDA-MB-231 and HT-29 colon cancer cell lines(IC50 = 20.42±2.23 and 22.51±0.42 μg/mL).
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.94%
- CAS No.: 18956-15-5
- Formule: C16H14O4
- Masse moléculaire:270.28
-
Stockage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Activité biologique
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| J774.A1 | IC50 |
42.76 μM
Compound: 138
|
Anti-inflammatory activity against mouse J774.A1 cells assessed as inhibition of LPS-induced IL-1beta mRNA expression level pretreated for 30 mins followed by LPS-induction and measured after 6 hrs by RT-PCR analysis
Anti-inflammatory activity against mouse J774.A1 cells assessed as inhibition of LPS-induced IL-1beta mRNA expression level pretreated for 30 mins followed by LPS-induction and measured after 6 hrs by RT-PCR analysis
|
[PMID: 37683361] |
| MCF7 | IC50 |
>60 μM
Compound: 2g
|
The compound was tested for antiproliferative activity against MCF-7 human breast cancer cells
The compound was tested for antiproliferative activity against MCF-7 human breast cancer cells
|
[PMID: 11720850] |
| RAW264.7 | IC50 |
43.07 μM
Compound: 138
|
Anti-inflammatory activity against mouse RAW264.7 cells assessed as inhibition of LPS-induced IL-1beta mRNA expression level pretreated for 30 mins followed by LPS-induction and measured after 6 hrs by RT-PCR analysis
Anti-inflammatory activity against mouse RAW264.7 cells assessed as inhibition of LPS-induced IL-1beta mRNA expression level pretreated for 30 mins followed by LPS-induction and measured after 6 hrs by RT-PCR analysis
|
[PMID: 37683361] |
Chemical Information
-
CAS No. 18956-15-5
-
Appearance Solid
-
Masse moléculaire 270.28
-
Formule C16H14O4
-
Color Orange to red
-
SMILES
O=C(C1=C(C=C(OC)C=C1O)O)/C=C/C2=CC=CC=C2
-
Structure Classification
-
Initial Source
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvant et solubilité
DMSO : 100 mg/mL (369.99 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.25 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.6999 mL | 18.4993 mL | 36.9987 mL | 92.4967 mL |
| 5 mM | 0.7400 mL | 3.6999 mL | 7.3997 mL | 18.4993 mL | |
| 10 mM | 0.3700 mL | 1.8499 mL | 3.6999 mL | 9.2497 mL | |
| 15 mM | 0.2467 mL | 1.2333 mL | 2.4666 mL | 6.1664 mL | |
| 20 mM | 0.1850 mL | 0.9250 mL | 1.8499 mL | 4.6248 mL | |
| 25 mM | 0.1480 mL | 0.7400 mL | 1.4799 mL | 3.6999 mL | |
| 30 mM | 0.1233 mL | 0.6166 mL | 1.2333 mL | 3.0832 mL | |
| 40 mM | 0.0925 mL | 0.4625 mL | 0.9250 mL | 2.3124 mL | |
| 50 mM | 0.0740 mL | 0.3700 mL | 0.7400 mL | 1.8499 mL | |
| 60 mM | 0.0617 mL | 0.3083 mL | 0.6166 mL | 1.5416 mL | |
| 80 mM | 0.0462 mL | 0.2312 mL | 0.4625 mL | 1.1562 mL | |
| 100 mM | 0.0370 mL | 0.1850 mL | 0.3700 mL | 0.9250 mL |