NP3-146 sodium
Based on 1 Customer Validation
NP3-146 sodium is a NLRP3 inflammasome inhibitor through locking the NACHT domain of NLRP3. NP3-146 sodium shows potent inhibitory activity against IL-1β release with an IC50 value of 0.171 μM in LPS (HY-D1056)/Nigericin (HY-127019)-stimulated BMDM cells. NP3-146 sodium regulates the levels of cleaved Caspase-1 and cleaved IL-1β in cell supernatants. NP3-146 sodium can be used for the research of inflammatory diseases.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 99.26%
- CAS No.: 1995068-96-6
- Formule: C20H27ClN2NaO5S
- Masse moléculaire:465.95
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Apoptosis Compound Library
HY-L003
-
Immunology/Inflammation Compound Library
HY-L007
-
NF-κB Signaling Compound Library
HY-L014
-
Antioxidant Compound Library
HY-L037
-
Differentiation Inducing Compound Library
HY-L038
-
Oxygen Sensing Compound Library
HY-L045
-
Pyroptosis Compound Library
HY-L059
-
Angiogenesis-Related Compound Library
HY-L088
-
Antidepressant Compound Library
HY-L108
-
Pain-Related Compound Library
HY-L139
-
Protease Inhibitor Library
HY-L147
-
Membrane Receptor-targeted Compound Library
HY-L150
-
Autoimmune Disease Compound Library
HY-L156
-
Cytokine Inhibitors Library
HY-L161
-
Inflammasomes related Compound Library
HY-L175
-
Multi-Target Compound Library
HY-L176
-
Radioprotector Library
HY-L178
-
MCE Bioactive Compound Library
HY-L001V
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
-
Pattern Recognition Receptors Library
HY-L237
Voir tous les produits spécifiques à Isoform Caspase
More
Activité biologique
|
NLRP3 inflammasome |
NP3-146 (1-10000 nM) sodium significantly inhibits IL-1β release with an IC50 value of 171 nM[1].
NP3-146 (0.05-0.5 μM) sodium regulates the levels of cleaved Caspase-1 and cleaved IL-1β in cell supernatants of the BMDM cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1995068-96-6
-
Appearance Solid
-
Masse moléculaire 465.95
-
Formule C20H27ClN2NaO5S
-
Color White to off-white
-
SMILES
O=C(NS(=O)(C1=CC(C(C)(C)O)=CO1)=O)NC2=C(C(C)C)C=C(Cl)C=C2C(C)C.[Na]
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
H2O : 100 mg/mL (214.62 mM; Need ultrasonic)
DMSO : 100 mg/mL (214.62 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.37 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureté et documentation
-
Fiche technique (273 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Instruction de manipulation (2659 KB)
Références
[1]. Feng H, et al. Design, synthesis and biological evaluation of sulfonylurea derivatives as NLRP3 inflammasome inhibitors. Bioorg Med Chem Lett. 2024 Dec 1;114:129987. [Content Brief]
[2]. Harrison D, et al. Discovery and Optimization of Triazolopyrimidinone Derivatives as Selective NLRP3 Inflammasome Inhibitors. ACS Med Chem Lett. 2022 Aug 1;13(8):1321-1328. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.1462 mL | 10.7308 mL | 21.4615 mL | 53.6538 mL |
| 5 mM | 0.4292 mL | 2.1462 mL | 4.2923 mL | 10.7308 mL | |
| 10 mM | 0.2146 mL | 1.0731 mL | 2.1462 mL | 5.3654 mL | |
| 15 mM | 0.1431 mL | 0.7154 mL | 1.4308 mL | 3.5769 mL | |
| 20 mM | 0.1073 mL | 0.5365 mL | 1.0731 mL | 2.6827 mL | |
| 25 mM | 0.0858 mL | 0.4292 mL | 0.8585 mL | 2.1462 mL | |
| 30 mM | 0.0715 mL | 0.3577 mL | 0.7154 mL | 1.7885 mL | |
| 40 mM | 0.0537 mL | 0.2683 mL | 0.5365 mL | 1.3413 mL | |
| 50 mM | 0.0429 mL | 0.2146 mL | 0.4292 mL | 1.0731 mL | |
| 60 mM | 0.0358 mL | 0.1788 mL | 0.3577 mL | 0.8942 mL | |
| 80 mM | 0.0268 mL | 0.1341 mL | 0.2683 mL | 0.6707 mL | |
| 100 mM | 0.0215 mL | 0.1073 mL | 0.2146 mL | 0.5365 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
NP3-146 sodium Related Classifications
HY-145087A Related Classifications
Powered by Bioz