N1,N8-Diacetylspermidine hydrochloride
Based on 1 Customer Validation
N1,N8-Diacetylspermidine hydrochloride is a polyamines in the human urine. N1,N8-Diacetylspermidine hydrochloride is useful as prognostic indicators after treatment and during follow-up examination of cancer patients.
For research use only. We do not sell to patients.
- Purity : 98.0%
- CAS No.: 178244-42-3
- Formula: C11H24ClN3O2
- Molecular Weight:265.78
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
All Endogenous Metabolite Isoforms
More
Biological Activity
Description
IC50 & Target
[1]|
Human Endogenous Metabolite |
Chemical Information
-
CAS No. 178244-42-3
-
Appearance Solid
-
Molecular Weight 265.78
-
Formula C11H24ClN3O2
-
Color Light yellow to yellow
-
SMILES
CC(NCCCCNCCCNC(C)=O)=O.[H]Cl
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
DMSO : 83.33 mg/mL (313.53 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 50 mg/mL (188.13 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (7.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (7.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 10 mg/mL (37.63 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (268 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
[1]. Umemori Y, et al. Evaluating the utility of N1,N12-diacetylspermine and N1,N8-diacetylspermidine in urine as tumormarkers for breast and colorectal cancers. Clin Chim Acta. 2010 Dec 14;411(23-24):1894-9. [Content Brief]
[2]. Hiramatsu K, et al. Diagnostic and prognostic usefulness of N1,N8-diacetylspermidine and N1,N12-diacetylsperminein urine as novel markers of malignancy. J Cancer Res Clin Oncol. 1997;123(10):539-45 [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.7625 mL | 18.8126 mL | 37.6251 mL | 94.0628 mL |
| 5 mM | 0.7525 mL | 3.7625 mL | 7.5250 mL | 18.8126 mL | |
| 10 mM | 0.3763 mL | 1.8813 mL | 3.7625 mL | 9.4063 mL | |
| 15 mM | 0.2508 mL | 1.2542 mL | 2.5083 mL | 6.2709 mL | |
| 20 mM | 0.1881 mL | 0.9406 mL | 1.8813 mL | 4.7031 mL | |
| 25 mM | 0.1505 mL | 0.7525 mL | 1.5050 mL | 3.7625 mL | |
| 30 mM | 0.1254 mL | 0.6271 mL | 1.2542 mL | 3.1354 mL | |
| 40 mM | 0.0941 mL | 0.4703 mL | 0.9406 mL | 2.3516 mL | |
| 50 mM | 0.0753 mL | 0.3763 mL | 0.7525 mL | 1.8813 mL | |
| 60 mM | 0.0627 mL | 0.3135 mL | 0.6271 mL | 1.5677 mL | |
| 80 mM | 0.0470 mL | 0.2352 mL | 0.4703 mL | 1.1758 mL | |
| 100 mM | 0.0376 mL | 0.1881 mL | 0.3763 mL | 0.9406 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.