Sigma-1 receptor antagonist 2
Based on 1 Customer Validation
Sigma-1 receptor antagonist 2 is a potent and selective sigma 1 receptor (σ1 R) antagonist with Kis of 3.88 and 1288 nM for σ1 and σ2 receptor, respectively.
For research use only. We do not sell to patients.
- Purity: 99.76%
- CAS No.: 1639220-15-7
- Formula: C20H26ClN3O2
- Molecular Weight:375.89
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
All Sigma Receptor Isoforms
More
Biological Activity
|
Sigma 1 Receptor |
Chemical Information
-
CAS No. 1639220-15-7
-
Appearance Solid
-
Molecular Weight 375.89
-
Formula C20H26ClN3O2
-
Color White to off-white
-
SMILES
CC1=NC(C2=CC=C(OC)C=C2)=NC(OCCCN3CCCCC3)=C1Cl
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Solvent & Solubility
DMSO : 86.67 mg/mL (230.57 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.17 mg/mL (5.77 mM); Clear solution
This protocol yields a clear solution of ≥ 2.17 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (21.7 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (268 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6604 mL | 13.3018 mL | 26.6035 mL | 66.5088 mL |
| 5 mM | 0.5321 mL | 2.6604 mL | 5.3207 mL | 13.3018 mL | |
| 10 mM | 0.2660 mL | 1.3302 mL | 2.6604 mL | 6.6509 mL | |
| 15 mM | 0.1774 mL | 0.8868 mL | 1.7736 mL | 4.4339 mL | |
| 20 mM | 0.1330 mL | 0.6651 mL | 1.3302 mL | 3.3254 mL | |
| 25 mM | 0.1064 mL | 0.5321 mL | 1.0641 mL | 2.6604 mL | |
| 30 mM | 0.0887 mL | 0.4434 mL | 0.8868 mL | 2.2170 mL | |
| 40 mM | 0.0665 mL | 0.3325 mL | 0.6651 mL | 1.6627 mL | |
| 50 mM | 0.0532 mL | 0.2660 mL | 0.5321 mL | 1.3302 mL | |
| 60 mM | 0.0443 mL | 0.2217 mL | 0.4434 mL | 1.1085 mL | |
| 80 mM | 0.0333 mL | 0.1663 mL | 0.3325 mL | 0.8314 mL | |
| 100 mM | 0.0266 mL | 0.1330 mL | 0.2660 mL | 0.6651 mL |