2. Neuronal Signaling
  3. Sigma Receptor
  4. Blarcamesine hydrochloride

Blarcamesine hydrochloride  (Synonyms: Anavex 2-73)

Cat. No.: HY-101864 Purity: 99.87%
COA Handling Instructions

Molarity Calculator

Blarcamesine hydrochloride (Anavex 2-73) is a Sigma-1 Receptor agonist with an IC50 of 860 nM.

For research use only. We do not sell to patients.

Blarcamesine hydrochloride Chemical Structure

Blarcamesine hydrochloride Chemical Structure

CAS No. : 195615-84-0

Size Price Stock Quantity
Free Sample (0.1 - 0.5 mg)   Apply Now  
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 88 In-stock
Solution
10 mM * 1 mL in DMSO USD 88 In-stock
Solid
5 mg USD 80 In-stock
10 mg USD 130 In-stock
50 mg USD 460 In-stock
100 mg USD 750 In-stock
200 mg   Get quote  
500 mg   Get quote  

* Please select Quantity before adding items.

This product is a controlled substance and not for sale in your territory.

Customer Review

Based on 2 publication(s) in Google Scholar

Other Forms of Blarcamesine hydrochloride:

Blarcamesine hydrochloride Related Antibodies

Top Publications Citing Use of Products

2 Publications Citing Use of MCE Blarcamesine hydrochloride

  • Biological Activity

  • Protocol

  • Purity & Documentation

  • References

  • Customer Review

Description

Blarcamesine hydrochloride (Anavex 2-73) is a Sigma-1 Receptor agonist with an IC50 of 860 nM.

IC50 & Target

Sigma 1 Receptor

 

In Vivo

The pre-administration of Blarcamesine leads to a dose-dependent attenuation of the scopolamine induced alternation deficit, significant at 1 and 3 mg/kg. The pre-treatment with Blarcamesine hydrochloride attenuates the impairments of step-through latency, dose dependently and significantly at doses higher than 0.3 mg/kg[1]. The Blarcamesine hydrochloride treatment dose-dependently blocks the recognition memory deficit, with a significant effect measured at 1 mg/kg. One day after injections, the significant Aβ25-35-induced decrease in Akt phosphorylation is significantly attenuated by Blarcamesine hydrochloride at 0.1 and 1 mg/kg dose. Seven days after injections, Blarcamesine hydrochloride attenuates the decrease in Ser9 phosphorylation induced by the peptide at 0.3 and 1 mg/kg. The Blarcamesine hydrochloride treatment dose-dependently prevents the Aβ25-35-induced increase in Aβ1-42 content, with a significant effect at the highest dose tested[2].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Clinical Trial
Molecular Weight

317.85

Formula

C19H24ClNO
CAS No.
Appearance

Solid

Color

White to off-white

SMILES

CN(C)CC1CCOC1(C2=CC=CC=C2)C3=CC=CC=C3.[H]Cl
Shipping

Room temperature in continental US; may vary elsewhere.
Storage

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

Solvent & Solubility
In Vitro: 

H2O : 100 mg/mL (314.61 mM; Need ultrasonic)

DMSO : 25 mg/mL (78.65 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 3.1461 mL 15.7307 mL 31.4614 mL
5 mM 0.6292 mL 3.1461 mL 6.2923 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.5 mg/mL (7.87 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.5 mg/mL (7.87 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 100 mg/mL (314.61 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
Purity & Documentation
References
Animal Administration
[2]

Male mice aged 7-9 weeks and weighing 32±2 g are used. Drugs (including Blarcamesine hydrochloride) are brought up to each dose by dilution and injected in a volume of 100 μL/20 g body weight. Animals are used between days 1 and 9 after i.c.v. injections for behavioral testing or killed before biochemical measures[2].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.
References

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO / H2O 1 mM 3.1461 mL 15.7307 mL 31.4614 mL 78.6535 mL
5 mM 0.6292 mL 3.1461 mL 6.2923 mL 15.7307 mL
10 mM 0.3146 mL 1.5731 mL 3.1461 mL 7.8653 mL
15 mM 0.2097 mL 1.0487 mL 2.0974 mL 5.2436 mL
20 mM 0.1573 mL 0.7865 mL 1.5731 mL 3.9327 mL
25 mM 0.1258 mL 0.6292 mL 1.2585 mL 3.1461 mL
30 mM 0.1049 mL 0.5244 mL 1.0487 mL 2.6218 mL
40 mM 0.0787 mL 0.3933 mL 0.7865 mL 1.9663 mL
50 mM 0.0629 mL 0.3146 mL 0.6292 mL 1.5731 mL
60 mM 0.0524 mL 0.2622 mL 0.5244 mL 1.3109 mL
H2O 80 mM 0.0393 mL 0.1966 mL 0.3933 mL 0.9832 mL
100 mM 0.0315 mL 0.1573 mL 0.3146 mL 0.7865 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.

Blarcamesine hydrochloride Related Classifications

Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Keywords:

Blarcamesine195615-84-0Anavex 2-73Sigma ReceptorInhibitorinhibitorinhibit

Your Recently Viewed Products:

Inquiry Online

Your information is safe with us. * Required Fields.

Product Name

  

Salutation

Applicant Name *

 

Email Address *

Phone Number *

 

Organization Name *

Department *

 

Requested quantity *

Country or Region *

      

Remarks

Bulk Inquiry

Inquiry Information

Product Name:
Blarcamesine hydrochloride
Cat. No.:
HY-101864
Quantity:
MCE Japan Authorized Agent:

Customer Review

Thank You for Your Feedback!

Request for HNMR Report

Please fill out this form to request the QC report. We will send it to your Email address shortly.

Your information is safe with us. * Required Fields.

Product Name

  

Lot #

Applicant Name *

 

Email Address *

Phone Number

 

Department *

Organization Name *

 

Country or Region *

Remarks

Request for HNMR Report

We have received your request and will respond to you as soon as possible.