URAT1&XO inhibitor 1
Based on 1 Customer Validation
URAT1&XO inhibitor 1 (compound 29) is a dual inhibitor of both URAT1 (IC50=~10 μM) and Xanthine Oxidase (IC50=1.01 μM). URAT1&XO inhibitor 1 results hypouricemic effect in potassium oxonate-induced hyperuricemia rat model. URAT1&XO inhibitor 1 is used for hyperuricemia research.
For research use only. We do not sell to patients.
- Purity: 99.96%
- CAS No.: 2669726-78-5
- Formula: C20H13N5O3S
- Molecular Weight:403.41
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Chemical Information
-
CAS No. 2669726-78-5
-
Appearance Solid
-
Molecular Weight 403.41
-
Formula C20H13N5O3S
-
Color White to off-white
-
SMILES
N#CC1=CC(C(C(NC2=C(C(O)=O)N=CS2)=O)=CN3CC4=NC=CC=C4)=C3C=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (247.89 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.20 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4789 mL | 12.3943 mL | 24.7887 mL | 61.9717 mL |
| 5 mM | 0.4958 mL | 2.4789 mL | 4.9577 mL | 12.3943 mL | |
| 10 mM | 0.2479 mL | 1.2394 mL | 2.4789 mL | 6.1972 mL | |
| 15 mM | 0.1653 mL | 0.8263 mL | 1.6526 mL | 4.1314 mL | |
| 20 mM | 0.1239 mL | 0.6197 mL | 1.2394 mL | 3.0986 mL | |
| 25 mM | 0.0992 mL | 0.4958 mL | 0.9915 mL | 2.4789 mL | |
| 30 mM | 0.0826 mL | 0.4131 mL | 0.8263 mL | 2.0657 mL | |
| 40 mM | 0.0620 mL | 0.3099 mL | 0.6197 mL | 1.5493 mL | |
| 50 mM | 0.0496 mL | 0.2479 mL | 0.4958 mL | 1.2394 mL | |
| 60 mM | 0.0413 mL | 0.2066 mL | 0.4131 mL | 1.0329 mL | |
| 80 mM | 0.0310 mL | 0.1549 mL | 0.3099 mL | 0.7746 mL | |
| 100 mM | 0.0248 mL | 0.1239 mL | 0.2479 mL | 0.6197 mL |