Alniditan dihydrochloride
Based on 1 Customer Validation
Alniditan (Alnitidan) dihydrochloride is a potent 5-HT1B and 5-HT1D receptors agonist, with IC50s of 1.7 nM and 1.3 nM for h5-HT1B and h5-HT1D receptors in HEK293 cells, respectively. Alniditan dihydrochloride has migraine-preventive effects.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.70%
- CAS. Nr.: 155428-00-5
- Formel: C17H28Cl2N4O
- Molecular Weight:375.34
-
Speicherung:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
Alle 5-HT Receptor Isoform-spezifische Produkte anzeigen
More
Biologische Aktivität
|
human 5-HT1B Receptor 1.7 nM (IC50) |
human 5-HT1D Receptor 1.3 nM (IC50) |
5-HT1B Receptor 0.9 nM (Kd) |
5-HT1D Receptor 1.2 nM (Kd) |
In vitro, Alniditan exhibits little vasoconstrictive effects on the rat basilar artery, although at a very high concentration 1 mM, Alniditan causes intensive constriction, most likely through a mechanism independent from 5-HT receptor activation[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS. Nr. 155428-00-5
-
Appearance Solid
-
Molecular Weight 375.34
-
Formel C17H28Cl2N4O
-
Color White to off-white
-
SMILES
[H]Cl.[H]Cl.C1(NCCCNC[C@H]2CCC3=CC=CC=C3O2)=NCCCN1
-
Synonyms
Alnitidan dihydrochloride
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Lösungsmittel & Löslichkeit
DMSO : 62.5 mg/mL (166.52 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (5.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (5.54 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
Verweise
[1]. Limmroth V, et al. Effects of alniditan on neurogenic oedema in the rat dura mater and on contraction of rat basilar artery. Eur J Pharmacol. 1999 Oct 8;382(2):103-9. [Content Brief]
[2]. Lesage AS, et al. Agonistic properties of alniditan, sumatriptan and dihydroergotamine on human 5-HT1B and 5-HT1D receptors expressed in various mammalian cell lines. Br J Pharmacol. 1998 Apr;123(8):1655-65. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.6643 mL | 13.3213 mL | 26.6425 mL | 66.6063 mL |
| 5 mM | 0.5329 mL | 2.6643 mL | 5.3285 mL | 13.3213 mL | |
| 10 mM | 0.2664 mL | 1.3321 mL | 2.6643 mL | 6.6606 mL | |
| 15 mM | 0.1776 mL | 0.8881 mL | 1.7762 mL | 4.4404 mL | |
| 20 mM | 0.1332 mL | 0.6661 mL | 1.3321 mL | 3.3303 mL | |
| 25 mM | 0.1066 mL | 0.5329 mL | 1.0657 mL | 2.6643 mL | |
| 30 mM | 0.0888 mL | 0.4440 mL | 0.8881 mL | 2.2202 mL | |
| 40 mM | 0.0666 mL | 0.3330 mL | 0.6661 mL | 1.6652 mL | |
| 50 mM | 0.0533 mL | 0.2664 mL | 0.5329 mL | 1.3321 mL | |
| 60 mM | 0.0444 mL | 0.2220 mL | 0.4440 mL | 1.1101 mL | |
| 80 mM | 0.0333 mL | 0.1665 mL | 0.3330 mL | 0.8326 mL | |
| 100 mM | 0.0266 mL | 0.1332 mL | 0.2664 mL | 0.6661 mL |
Alniditan dihydrochloride Related Classifications
HY-101698B Related Classifications
Powered by Bioz