18:1 PEG2000 PE ammonium
Based on 1 Customer Validation
18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) is a polyethyleneglycol/phosphatidyl-ethanolamine conjugate. 18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) can be used for drug delivery.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.64%
- No. CAS: 474922-90-2
- Fòrmula: (C2H4O)nC43H80NO10P.NH3
- Peso molecular:2000 (Average)
-
Almacenamiento:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
-
HY-144012
DPPE-PEG2000 ammoniumPEG Modified Phosphatidylethanolamine -
HY-144006
DMPE-PEG2000 ammoniumPEG-Phospholipid Conjugate -
HY-155934
18:1 PEG5000 PE ammoniumLiposome Delivery -
HY-144005
C16 PEG2000 CeramideAutophagy Inducer -
HY-144008B
C8 PEG750 CeramideLipid -
HY-W591381
DSG-PEG2000PEG Derivative -
HY-155930
18:1 PEG350 PE ammoniumLiposome Delivery -
HY-155931
18:1 PEG550 PE ammoniumLiposome Delivery -
HY-155932
18:1 PEG1000 PE ammoniumLiposome Delivery -
HY-155933
18:1 PEG3000 PE ammoniumLiposome Delivery -
HY-144008
C8 PEG-CeramideLNPs for Drug Delivery -
HY-144008A
C8 PEG5000 CeramideLNPs for Drug Delivery
Actividad biológica
Descripciòn
In Vitro
18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) increases the hydrophilicity of lipids, promotes steric repulsion, prevents the aggregation of the lipid bilayer, thereby stabilizing the lipid bilayer structure and reducing the membrane damage[2].
18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) can be used for preparation of liposomes and nanoparticles in drug delivery system. 18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) acts as a carrier of fluorescent probes for bio-imaging. 18:1 PEG2000 PE ammonium (DOPE-PEG2000 ammonium) can also be used in tissue engineering for its biocompatibility[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 474922-90-2
-
Appearance Solid
-
Peso molecular 2000 (Average)
-
Fòrmula (C2H4O)nC43H80NO10P.NH3
-
Color White to off-white
-
SMILES
O=C(OCCOC)NCCOP(O)(OC[C@H](OC(CCCCCCC/C=C\CCCCCCCC)=O)COC(CCCCCCC/C=C\CCCCCCCC)=O)=O.[n].N
-
Synonyms
DOPE-PEG2000 ammonium; 1,2-Dioleoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethylene glycol)-2000] ammonium
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvente y solubilidad
In Vitro:
DMSO : 100 mg/mL (Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 40 mg/mL (Need ultrasonic)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 10 mg/mL; Clear solution
This protocol yields a clear solution of ≥ 10 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 10 mg/mL; Clear solution
This protocol yields a clear solution of ≥ 10 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (100.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (270 KB)
-
SDS (647 KB)
- English - EN (647 KB)
- Français - FR (647 KB)
- Deutsch - DE (647 KB)
- Norwegian - NO (647 KB)
- Español - ES (647 KB)
- Swedish - SV (647 KB)
- Italian - IT (647 KB)
- Korean - KR (647 KB)
- Portuguese - PT (647 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Anatoly N Lukyanov, et al. Increased accumulation of PEG-PE micelles in the area of experimental myocardial infarction in rabbits. J Control Release. 2004 Jan 8;94(1):187-93. [Content Brief]
[2]. Giakoumatos EC, et al., Impact of poly(ethylene glycol) functionalized lipids on ordering and fluidity of colloid supported lipid bilayers. Soft Matter. 2022 Oct 12;18(39):7569-7578. [Content Brief]
Calculators
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
18:1 PEG2000 PE ammonium Related Classifications
HY-144010 Related Classifications
Powered by Bioz