Clathrin-IN-4
Based on 1 Customer Validation
Clathrin-IN-4 (compound 8b), a Wiskostatin?(HY-12534) analogue, is a potent inhibitor of clathrin mediated endocytosis with an IC50 of 2.1 μM. Clathrin-IN-4 is a dynamin I GTPase activity inhibitor with an IC50 of 9.1 μM.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.54%
- CAS 番号: 762242-59-1
- 分子式: C17H18Br2N2O
- 分子量:426.15
-
保管条件:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
生物活性
化学情報
-
CAS 番号 762242-59-1
-
性状 Solid
-
分子量 426.15
-
分子式 C17H18Br2N2O
-
Color White to off-white
-
SMILES
CN(C[C@H](CN1C2=CC=C(C=C2C3=CC(Br)=CC=C31)Br)O)C
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
溶剤 & 溶解度
DMSO : 90 mg/mL (211.19 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 4.5 mg/mL (10.56 mM); Clear solution
This protocol yields a clear solution of ≥ 4.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (45.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
純度とドキュメンテーション
-
データシート (276 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
取扱説明書 (2659 KB)
参考文献
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3466 mL | 11.7330 mL | 23.4659 mL | 58.6648 mL |
| 5 mM | 0.4693 mL | 2.3466 mL | 4.6932 mL | 11.7330 mL | |
| 10 mM | 0.2347 mL | 1.1733 mL | 2.3466 mL | 5.8665 mL | |
| 15 mM | 0.1564 mL | 0.7822 mL | 1.5644 mL | 3.9110 mL | |
| 20 mM | 0.1173 mL | 0.5866 mL | 1.1733 mL | 2.9332 mL | |
| 25 mM | 0.0939 mL | 0.4693 mL | 0.9386 mL | 2.3466 mL | |
| 30 mM | 0.0782 mL | 0.3911 mL | 0.7822 mL | 1.9555 mL | |
| 40 mM | 0.0587 mL | 0.2933 mL | 0.5866 mL | 1.4666 mL | |
| 50 mM | 0.0469 mL | 0.2347 mL | 0.4693 mL | 1.1733 mL | |
| 60 mM | 0.0391 mL | 0.1955 mL | 0.3911 mL | 0.9777 mL | |
| 80 mM | 0.0293 mL | 0.1467 mL | 0.2933 mL | 0.7333 mL | |
| 100 mM | 0.0235 mL | 0.1173 mL | 0.2347 mL | 0.5866 mL |
Clathrin-IN-4 関連分類
HY-152218 関連分類
Powered by Bioz