Mepivacaine hydrochloride
Based on 1 publication(s) in Google Scholar
Mepivacaine hydrochloride binds to specific voltage-gated sodium ion channels in neuronal cell membranes, which inhibits both sodium influx and membrane depolarization.
商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。
- 純度: 99.68%
- CAS 番号: 1722-62-9
- 分子式: C15H23ClN2O
- 分子量:282.81
-
保管条件:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
生物活性
-
化学情報
-
溶剤 & 溶解度
- 純度とドキュメンテーション
- 参考文献
-
Help & FAQs
-
HY-A0093
Mexiletine hydrochloride
-
HY-B0575
Triamterene
-
HY-B0285A
Amiloride hydrochloride
-
HY-B0364A
Dyclonine hydrochloride
-
HY-B0285AR
Amiloride hydrochloride (Standard)
-
HY-B0517AR
Mepivacaine hydrochloride (Standard)
-
HY-A0093R
Mexiletine hydrochloride (Standard)
-
HY-B0653
Levobupivacaine
-
HY-B0124
Zonisamide
-
HY-128067
5-(N,N-Hexamethylene)-amiloride
-
HY-B0563A
Ropivacaine hydrochloride monohydrate
-
HY-B1546A
Benzamil hydrochloride
MedChemExpress（MCE）の使用を引用している文献 Mepivacaine hydrochloride
More
生物活性
Mepivacaine hydrochloride binds to specific voltage-gated sodium ion channels in neuronal cell membranes, which inhibits both sodium influx and membrane depolarization. This leads to a blockage of nerve impulse initiation and conduction and results in a reversible loss of sensation. Compared to other local anesthetics, this agent has a more rapid onset and moderate duration of action[2].
Mepivacaine hydrochloride has a reasonably rapid onset (more rapid than that of procaine) and medium duration of action (shorter than that of procaine)[3].
Mepivacaine hydrochloride displays a preferential use-dependent block of Na(v)1.8, S(-)-bupivacaine displays a preference for TTXs Na(+) channels[4].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
化学情報
-
CAS 番号 1722-62-9
-
性状 Solid
-
分子量 282.81
-
分子式 C15H23ClN2O
-
Color White to off-white
-
SMILES
O=C(C(CCCC1)N1C)NC(C(C)=CC=C2)=C2C.Cl
-
輸送条件
Room temperature in continental US; may vary elsewhere.
-
保管条件
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Mol Med Rep
CACNB1 alleviates mepivacaine‑induced myocardial ischemia/reperfusion injury by promoting Nrf2 nuclear translocation. [Abstract]2026 Feb;33(2):71. PMID: 41416438
溶剤 & 溶解度
H2O : 100 mg/mL (353.59 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
濃度 (開始) × 体積 (開始) = 濃度 (終了) × 体積 (終了)
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (353.59 mM); Clear solution; Need ultrasonic
純度とドキュメンテーション
-
データシート (275 KB)
-
SDS (480 KB)
- English - EN (480 KB)
- Français - FR (480 KB)
- Deutsch - DE (480 KB)
- Norwegian - NO (480 KB)
- Español - ES (480 KB)
- Swedish - SV (480 KB)
- Italian - IT (480 KB)
- Korean - KR (480 KB)
- Portuguese - PT (480 KB)
-
取扱説明書 (2659 KB)
参考文献
[1]. Froehle M, et al. ECMO for Cardiac Rescue after Accidental Intravenous Mepivacaine Application. Case Rep Pediatr. 2012;2012:491692. [Content Brief]
[2]. mepivacaine hydrochloride.
[3]. Burm, A.G., et al., Pharmacokinetics of the enantiomers of mepivacaine after intravenous administration of the racemate in volunteers. Anesth Analg, 1997. 84(1): p. 85-9. [Content Brief]
[4]. Leffler, A., J. Reckzeh, and C. Nau, Block of sensory neuronal Na+ channels by the secreolytic ambroxol is associated with an interaction with local anesthetic binding sites. Eur J Pharmacol, 2010. 630(1-3): p. 19-28. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O | 1 mM | 3.5359 mL | 17.6797 mL | 35.3594 mL | 88.3986 mL |
| 5 mM | 0.7072 mL | 3.5359 mL | 7.0719 mL | 17.6797 mL | |
| 10 mM | 0.3536 mL | 1.7680 mL | 3.5359 mL | 8.8399 mL | |
| 15 mM | 0.2357 mL | 1.1786 mL | 2.3573 mL | 5.8932 mL | |
| 20 mM | 0.1768 mL | 0.8840 mL | 1.7680 mL | 4.4199 mL | |
| 25 mM | 0.1414 mL | 0.7072 mL | 1.4144 mL | 3.5359 mL | |
| 30 mM | 0.1179 mL | 0.5893 mL | 1.1786 mL | 2.9466 mL | |
| 40 mM | 0.0884 mL | 0.4420 mL | 0.8840 mL | 2.2100 mL | |
| 50 mM | 0.0707 mL | 0.3536 mL | 0.7072 mL | 1.7680 mL | |
| 60 mM | 0.0589 mL | 0.2947 mL | 0.5893 mL | 1.4733 mL | |
| 80 mM | 0.0442 mL | 0.2210 mL | 0.4420 mL | 1.1050 mL | |
| 100 mM | 0.0354 mL | 0.1768 mL | 0.3536 mL | 0.8840 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Mepivacaine hydrochloride 関連分類
HY-B0517A 関連分類
Powered by Bioz