Norvancomycin monohydrochloride
Based on 1 publication(s) in Google Scholar
Norvancomycin hydrochloride is a cell wall synthesis inhibitor targeting peptidoglycan precursors of Gram-positive bacteria and cannot pass the blood-brain barrier. Norvancomycin hydrochloride can competitively bind to peptidoglycan precursors, irreversibly inhibit bacterial cell wall synthesis, and exert antibacterial activity. Norvancomycin hydrochloride is mainly used in the study of Gram-positive bacterial infections, especially infections caused by methicillin-resistant Staphylococcus aureus (MRSA) and methicillin-resistant Staphylococcus epidermidis (MRSE). Norvancomycin hydrochloride can also be incorporated into the bionic calcium phosphate coating of titanium implants to enhance antibacterial activity and inhibit postoperative orthopedic infections.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 95.25%
- CAS No.: 213997-73-0
- 화학식: C65H74Cl3N9O24
- 분자량:1471.69
-
보관:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
Anti-Infection Compound Library
HY-L002
-
FDA-Approved Drug Library
HY-L022
-
Drug Repurposing Compound Library
HY-L035
-
Antibacterial Compound Library
HY-L049
-
Anti-COVID-19 Compound Library
HY-L052
-
NMPA-Approved Drug Library
HY-L053
-
FDA Approved & Pharmacopeial Drug Library
HY-L066
-
Off-patent Drug Library
HY-L141
-
Anti-Drug-Resistant Compound Library
HY-L169
-
Bioactive Compound Library Max
HY-L181
-
Drug Repurposing Compound Library Plus
HY-L035P
-
FDA-Approved Drug Library Plus
HY-L022P
-
FDA-Approved Drug Library Mini
HY-L022M
-
Bioactive Compound Library
HY-L001
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) Norvancomycin monohydrochloride
More
Biological Activity
|
Glycopeptide |
Norvancomycin hydrochloride (100-1000 mg/L; 48 h) can be coated with biomimetic calcium phosphate coating. The effective content increases first and then stabilizes with the increase of solution concentration. Norvancomycin hydrochloride reaches 2.16 μg/mg coating at 600 mg/L, and the release is fast first and then slow[1].
In the in vitro antibacterial experiment, the inhibition zone of Norvancomycin hydrochloride (100-800 mg/L; 24 h) against Staphylococcus aureus increases with the increase of concentration, significantly inhibiting bacterial adhesion[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
The pharmacokinetics of Norvancomycin (100 mg/kg; intravenous injection; single dose; single) in male Kunming mice shows that its elimination half-life is 42.43 minutes and the clearance rate is 0.0233 mL·kg-1·min-1[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 213997-73-0
-
Appearance Solid
-
분자량 1471.69
-
화학식 C65H74Cl3N9O24
-
Color White to off-white
-
SMILES
O[C@@H]1[C@@H](O[C@@](O[C@@H](C)[C@H]2O)([H])C[C@@]2(N)C)[C@@H](O[C@H](CO)[C@H]1O)OC3=C(OC4=CC=C([C@H]([C@H]5NC([C@H](N)CC(C)C)=O)O)C=C4Cl)C=C([C@](NC([C@@H](NC5=O)CC(N)=O)=O)([H])C(N[C@](C6=O)([H])C7=CC8=C(O)C=C7)=O)C=C3OC9=CC=C([C@H]([C@](C(N[C@@](C(O)=O)([H])C%10=C8C(O)=CC(O)=C%10)=O)([H])N6)O)C=C9Cl.Cl
-
Synonyms
N-Demethylvancomycin monohydrochloride; NVCM monohydrochloride
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
J Control Release
cRGD enables rapid phagocytosis of liposomal vancomycin for intracellular bacterial clearance. [Abstract]2022 Apr:344:202-213. PMID: 35235809
용액&용해도
H2O : ≥ 100 mg/mL (67.95 mM)
DMSO : ≥ 100 mg/mL (67.95 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (1.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (1.70 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (67.95 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
순도&문서
-
Data Sheet (286 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Zhou T, et al. Study on pharmacokinetics and tissue distribution of norvancomycin in rats by CE with electrochemical detection. Electrophoresis. 2006 May;27(9):1790-6. [Content Brief]
[2]. Pan CJ, et al. Enhancing the antibacterial activity of biomimetic HA coatings by incorporation of norvancomycin. J Orthop Sci. 2011 Jan;16(1):105-13. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 0.6795 mL | 3.3975 mL | 6.7949 mL | 16.9873 mL |
| 5 mM | 0.1359 mL | 0.6795 mL | 1.3590 mL | 3.3975 mL | |
| 10 mM | 0.0679 mL | 0.3397 mL | 0.6795 mL | 1.6987 mL | |
| 15 mM | 0.0453 mL | 0.2265 mL | 0.4530 mL | 1.1325 mL | |
| 20 mM | 0.0340 mL | 0.1699 mL | 0.3397 mL | 0.8494 mL | |
| 25 mM | 0.0272 mL | 0.1359 mL | 0.2718 mL | 0.6795 mL | |
| 30 mM | 0.0226 mL | 0.1132 mL | 0.2265 mL | 0.5662 mL | |
| 40 mM | 0.0170 mL | 0.0849 mL | 0.1699 mL | 0.4247 mL | |
| 50 mM | 0.0136 mL | 0.0679 mL | 0.1359 mL | 0.3397 mL | |
| 60 mM | 0.0113 mL | 0.0566 mL | 0.1132 mL | 0.2831 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Norvancomycin monohydrochloride Related Classifications
HY-B1924 Related Classifications
Powered by Bioz