(S,R,S)-AHPC-C2-PEG3-BCN
Based on 1 Customer Validation
(S,R,S)-AHPC-C2-PEG3-BCN (Compound 16b) is a VHL ligand, and can be used for synthesis of PROTACs.
For research use only. We do not sell to patients.
- Purity: 98.44%
- CAS No.: 2876198-36-4
- Formula: C42H59N5O9S
- Molecular Weight:810.01
-
Storage:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
All E3 Ligase Ligand-Linker Conjugates Isoforms
More
Biological Activity
Chemical Information
-
CAS No. 2876198-36-4
-
Appearance Solid
-
Molecular Weight 810.01
-
Formula C42H59N5O9S
-
Color White to light yellow
-
SMILES
O=C(N1[C@@H](C[C@H](C1)O)C(NCC2=CC=C(C3=C(C)N=CS3)C=C2)=O)[C@H](C(C)(C)C)NC(CCOCCOCCOCCNC(OC[C@@H]4[C@@]5([H])[C@]4([H])CCC#CCC5)=O)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 100 mg/mL (123.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (3.09 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.2346 mL | 6.1728 mL | 12.3455 mL | 30.8638 mL |
| 5 mM | 0.2469 mL | 1.2346 mL | 2.4691 mL | 6.1728 mL | |
| 10 mM | 0.1235 mL | 0.6173 mL | 1.2346 mL | 3.0864 mL | |
| 15 mM | 0.0823 mL | 0.4115 mL | 0.8230 mL | 2.0576 mL | |
| 20 mM | 0.0617 mL | 0.3086 mL | 0.6173 mL | 1.5432 mL | |
| 25 mM | 0.0494 mL | 0.2469 mL | 0.4938 mL | 1.2346 mL | |
| 30 mM | 0.0412 mL | 0.2058 mL | 0.4115 mL | 1.0288 mL | |
| 40 mM | 0.0309 mL | 0.1543 mL | 0.3086 mL | 0.7716 mL | |
| 50 mM | 0.0247 mL | 0.1235 mL | 0.2469 mL | 0.6173 mL | |
| 60 mM | 0.0206 mL | 0.1029 mL | 0.2058 mL | 0.5144 mL | |
| 80 mM | 0.0154 mL | 0.0772 mL | 0.1543 mL | 0.3858 mL | |
| 100 mM | 0.0123 mL | 0.0617 mL | 0.1235 mL | 0.3086 mL |