S1R agonist 1 hydrochloride
Based on 1 Customer Validation
S1R agonist 1 (Compound 6b) hydrochloride is a selective S1R agonist with Kis of 0.93 nM and 72 nM for S1R and S2R, respectively. S1R agonist 1 hydrochloride exhibits neuroprotection against ROS and NMDA-induced neurotoxicity.
For research use only. We do not sell to patients.
- Purity: 99.83%
- CAS No.: 242487-82-7
- Formula: C20H26ClNO
- Molecular Weight:331.88
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
All Sigma Receptor Isoforms
More
Biological Activity
Ki: 0.93 nM and 72 nM for S1R and S2R[1]
S1R agonist 1 (Compound 6b; 0.1-5 μM) hydrochloride significantly increases the nerve growth factor (NGF) induced neurite outgrowth at all the tested concentrations in a dose-dependent manner in PC12 cell lines[1].
S1R agonist 1 (24 h) hydrochloride significantly prevents cell damage induced by Rotenone (HY-B1756) when tested at the concentration of 1 μM in SHSY5Y cells[1].
S1R agonist 1 (0.1-5 μM; 24 h) hydrochloride demonstrates a neuroprotective effect against NMDA stimuli in SHSY5Y cells[1].
S1R agonist 1 (0-10 μM; 24-72 h) hydrochloride shows no cytotoxicity against A549, LoVo and Panc-1 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 242487-82-7
-
Appearance Solid
-
Molecular Weight 331.88
-
Formula C20H26ClNO
-
Color White to off-white
-
SMILES
[H]Cl.C1(OCCN2CCC(CC2)CC3=CC=CC=C3)=CC=CC=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 100 mg/mL (301.31 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.53 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.0131 mL | 15.0657 mL | 30.1314 mL | 75.3284 mL |
| 5 mM | 0.6026 mL | 3.0131 mL | 6.0263 mL | 15.0657 mL | |
| 10 mM | 0.3013 mL | 1.5066 mL | 3.0131 mL | 7.5328 mL | |
| 15 mM | 0.2009 mL | 1.0044 mL | 2.0088 mL | 5.0219 mL | |
| 20 mM | 0.1507 mL | 0.7533 mL | 1.5066 mL | 3.7664 mL | |
| 25 mM | 0.1205 mL | 0.6026 mL | 1.2053 mL | 3.0131 mL | |
| 30 mM | 0.1004 mL | 0.5022 mL | 1.0044 mL | 2.5109 mL | |
| 40 mM | 0.0753 mL | 0.3766 mL | 0.7533 mL | 1.8832 mL | |
| 50 mM | 0.0603 mL | 0.3013 mL | 0.6026 mL | 1.5066 mL | |
| 60 mM | 0.0502 mL | 0.2511 mL | 0.5022 mL | 1.2555 mL | |
| 80 mM | 0.0377 mL | 0.1883 mL | 0.3766 mL | 0.9416 mL | |
| 100 mM | 0.0301 mL | 0.1507 mL | 0.3013 mL | 0.7533 mL |