(Z)-11-Tetradecenyl acetate
Based on 1 Customer Validation
(Z)-11-Tetradecenyl acetate is a sex pheromone component and male attractant. (Z)-11-Tetradecenyl acetate triggers strong and stable electrophysiological responses in the antennal sensilla of male Euhyponomeutoides albithoracellus. (Z)-11-Tetradecenyl acetate, when used in combination with (E)-11-tetradecenyl acetate (HY-W1067200), attracts male Euhyponomeutoides albithoracellus. (Z)-11-Tetradecenyl acetate contributes to the development of sustainable pest control strategies including monitoring and mating disruption.
For research use only. We do not sell to patients.
- Purity: 95.0%
- CAS No.: 20711-10-8
- Formula: C16H30O2
- Molecular Weight:254.41
-
Storage:
Store at room temperature, keep dry and cool.
In solvent -80°C, 1 year , -20°C, 6 months
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
(Z)-11-tetradecenyl acetate elicits strong, consistent electrophysiological responses from head-mounted antennae of male Euhyponomeutoides albithoracellus moths at a concentration of 1 ng[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:currant bud moth[1]
-
Dosage:100 μg (1:1 blend with (E)-11-tetradecenyl acetate); 25 μg (25:75 E:Z ratio, total 100 μg blend); 50 μg (50:50 E:Z ratio, total 100 μg blend); 75 μg (75:25 E:Z ratio, total 100 μg blend); 90 μg (90:10 E:Z ratio, total 100 μg blend)
-
Administration:loaded onto red rubber septa; deployed in field traps
-
Result:Caught very few male moths when used alone.
Caught high numbers of male moths when in 1:1 blend with (E)-11-tetradecenyl acetate.
Achieved highest mean catch per trap when in 25:75 (E:Z) blend.
Achieved lower mean catch per trap when in 50:50 (E:Z) blend compared to 25:75 blend.
Caught significantly fewer male moths when in 10:90, 75:25, or 90:10 (E:Z) blends.
Chemical Information
-
CAS No. 20711-10-8
-
Appearance Liquid (Density: 0.878±0.06 g/cm3)
-
Molecular Weight 254.41
-
Formula C16H30O2
-
Color Colorless to light yellow
-
SMILES
C(CCCCCC/C=C\CC)CCCOC(C)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Store at room temperature, keep dry and cool
In solvent -80°C 1 year -20°C 6 months
Solvent & Solubility
DMSO : 100 mg/mL (393.07 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (9.83 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (9.83 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (267 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 1 year; -20°C, 6 months. When stored at -80°C, please use it within 1 year. When stored at -20°C, please use it within 6 months.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.9307 mL | 19.6533 mL | 39.3066 mL | 98.2666 mL |
| 5 mM | 0.7861 mL | 3.9307 mL | 7.8613 mL | 19.6533 mL | |
| 10 mM | 0.3931 mL | 1.9653 mL | 3.9307 mL | 9.8267 mL | |
| 15 mM | 0.2620 mL | 1.3102 mL | 2.6204 mL | 6.5511 mL | |
| 20 mM | 0.1965 mL | 0.9827 mL | 1.9653 mL | 4.9133 mL | |
| 25 mM | 0.1572 mL | 0.7861 mL | 1.5723 mL | 3.9307 mL | |
| 30 mM | 0.1310 mL | 0.6551 mL | 1.3102 mL | 3.2756 mL | |
| 40 mM | 0.0983 mL | 0.4913 mL | 0.9827 mL | 2.4567 mL | |
| 50 mM | 0.0786 mL | 0.3931 mL | 0.7861 mL | 1.9653 mL | |
| 60 mM | 0.0655 mL | 0.3276 mL | 0.6551 mL | 1.6378 mL | |
| 80 mM | 0.0491 mL | 0.2457 mL | 0.4913 mL | 1.2283 mL | |
| 100 mM | 0.0393 mL | 0.1965 mL | 0.3931 mL | 0.9827 mL |
(Z)-11-Tetradecenyl acetate Related Classifications
HY-W108424 Related Classifications
Powered by Bioz