Ziprasidone hydrochloride monohydrate
Based on 4 publication(s) in Google Scholar
Ziprasidone (CP-88059) hydrochloride monohydrate is an orally active combined 5-HT and dopamine receptor antagonist. Ziprasidone hydrochloride monohydrate has affinities for Rat D2 (Ki=4.8 nM), 5-HT2A (Ki=0.42 nM) and 5-HT1A (Ki=3.4 nM).
For research use only. We do not sell to patients.
- Purity: 98.11%
- CAS No.: 138982-67-9
- Formula: C21H24Cl2N4O2S
- Molecular Weight:467.41
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications Citing Use of MedChemExpress (MCE) Ziprasidone hydrochloride monohydrate
MoreAll 5-HT Receptor Isoforms
MoreAll Dopamine Receptor Isoforms
More
Biological Activity
|
Rat 5-HT2A 0.42 nM (Ki) |
5-HT1A Receptor |
5-HT2A Receptor |
Rat 5-HT1A Receptor 3.4 nM (Ki) |
Rat D2 Receptor 4.8 nM (Ki) |
Ziprasidone hydrochloride monohydrate (0-500 nM, 150 seconds) blocks wild-type hERG current[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HEK-293 cells
-
Concentration:0-500 nM
-
Incubation Time:150 seconds
-
Result:Blocked wild-type hERG current in a voltage- and concentration-dependent manner (IC50 = 120 nm).
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Eight-week-old female Sprague-Dawley rats weighing 200 to 250 g[3]
-
Dosage:20 mg/kg
-
Administration:Oral gavage; 20 mg/kg; once daily; 7 weeks
-
Result:Gained significantly less weight (P = 0.031), had a lower level of physical activity (P = 0.016), showed a higher resting energy expenditure (P < 0.001), and displayed a greater capacity for thermogenesis when subjected to cold (P < 0.001).
Chemical Information
-
CAS No. 138982-67-9
-
Appearance Solid
-
Molecular Weight 467.41
-
Formula C21H24Cl2N4O2S
-
Color Pink to red
-
SMILES
O=C1CC2=CC(CCN3CCN(C4=NSC5=C4C=CC=C5)CC3)=C(Cl)C=C2N1.[H]Cl.O
-
Synonyms
CP 88059 hydrochloride monohydrate
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Publications (4)
-
Journal Impact Factor
-
Most Recent
-
ACS Environ Au
Machine Learning-Assisted Recognition of Environmental Sulfur-Containing Chemicals in Nontargeted Mass Spectrometry Analysis of Inadequate Mass Resolution. [Abstract]2025 Aug 5;5(6):573-582. PMID: 41277996 -
Drug Test Anal
Supramolecular Solvent Extraction for Doping Control Analysis of Prohibited Substances in Horse Urine. [Abstract]2026 May;18(5):652-668. PMID: 41814125 -
bioRxiv
A drug repurposing screen reveals dopamine signaling as a candidate therapeutic pathway for PIGA-CDG. [Abstract]2026 Apr 18:2026.04.17.719256. PMID: 42039650 -
Solvent & Solubility
DMSO : 25 mg/mL (53.49 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.35 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.35 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (282 KB)
-
SDS (418 KB)
- English - EN (418 KB)
- Français - FR (418 KB)
- Deutsch - DE (418 KB)
- Norwegian - NO (418 KB)
- Español - ES (418 KB)
- Swedish - SV (418 KB)
- Italian - IT (418 KB)
- Korean - KR (418 KB)
- Portuguese - PT (418 KB)
-
Handling Instructions (2659 KB)
References
[1]. Rollema H, et al. 5-HT(1A) receptor activation contributes to ziprasidone-induced dopamine release in the rat prefrontal cortex. Biol Psychiatry. 2000;48(3):229-237. [Content Brief]
[2]. Zhi Su, et al. Block of hERG channel by ziprasidone: biophysical properties and molecular determinants. Biochem Pharmacol. 2006 Jan 12;71(3):278-86. [Content Brief]
[3]. Subin Park, et al. The effect of ziprasidone on body weight and energy expenditure in female rats. Metabolism. 2012 Jun;61(6):787-93. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1394 mL | 10.6972 mL | 21.3945 mL | 53.4862 mL |
| 5 mM | 0.4279 mL | 2.1394 mL | 4.2789 mL | 10.6972 mL | |
| 10 mM | 0.2139 mL | 1.0697 mL | 2.1394 mL | 5.3486 mL | |
| 15 mM | 0.1426 mL | 0.7131 mL | 1.4263 mL | 3.5657 mL | |
| 20 mM | 0.1070 mL | 0.5349 mL | 1.0697 mL | 2.6743 mL | |
| 25 mM | 0.0856 mL | 0.4279 mL | 0.8558 mL | 2.1394 mL | |
| 30 mM | 0.0713 mL | 0.3566 mL | 0.7131 mL | 1.7829 mL | |
| 40 mM | 0.0535 mL | 0.2674 mL | 0.5349 mL | 1.3372 mL | |
| 50 mM | 0.0428 mL | 0.2139 mL | 0.4279 mL | 1.0697 mL |