Ald-Ph-amido-PEG4-C2-NHS ester
Based on 1 Customer Validation
Ald-Ph-amido-PEG4-C2-NHS ester is a nonclaevable 4-unit PEG linker for antibody-agent-conjugation (ADC).
For research use only. We do not sell to patients.
- Purity: 98.12%
- CAS No.: 1353011-74-1
- Formula: C23H30N2O10
- Molecular Weight:494.49
-
Storage:Pure form -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
-
Help & FAQs
Biological Activity
|
Non-cleavable Linker |
Chemical Information
-
CAS No. 1353011-74-1
-
Appearance Viscous Liquid
-
Molecular Weight 494.49
-
Formula C23H30N2O10
-
Color Colorless to light yellow
-
SMILES
O=C(ON1C(CCC1=O)=O)CCOCCOCCOCCOCCNC(C2=CC=C(C=O)C=C2)=O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Pure form -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 200 mg/mL (404.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (10.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (10.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (241 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0223 mL | 10.1114 mL | 20.2229 mL | 50.5571 mL |
| 5 mM | 0.4045 mL | 2.0223 mL | 4.0446 mL | 10.1114 mL | |
| 10 mM | 0.2022 mL | 1.0111 mL | 2.0223 mL | 5.0557 mL | |
| 15 mM | 0.1348 mL | 0.6741 mL | 1.3482 mL | 3.3705 mL | |
| 20 mM | 0.1011 mL | 0.5056 mL | 1.0111 mL | 2.5279 mL | |
| 25 mM | 0.0809 mL | 0.4045 mL | 0.8089 mL | 2.0223 mL | |
| 30 mM | 0.0674 mL | 0.3370 mL | 0.6741 mL | 1.6852 mL | |
| 40 mM | 0.0506 mL | 0.2528 mL | 0.5056 mL | 1.2639 mL | |
| 50 mM | 0.0404 mL | 0.2022 mL | 0.4045 mL | 1.0111 mL | |
| 60 mM | 0.0337 mL | 0.1685 mL | 0.3370 mL | 0.8426 mL | |
| 80 mM | 0.0253 mL | 0.1264 mL | 0.2528 mL | 0.6320 mL | |
| 100 mM | 0.0202 mL | 0.1011 mL | 0.2022 mL | 0.5056 mL |
Ald-Ph-amido-PEG4-C2-NHS ester Related Classifications
HY-130101 Related Classifications
Powered by Bioz