Carbazochrome sodium sulfonate
Based on 1 Customer Validation
Carbazochrome sodium sulfonate (AC-17) is a capillary stabiliser and used for the research of haemorrhage. Carbazochrome sodium sulfonate is an antihemorrhagic agent.
For research use only. We do not sell to patients.
- Purity : 98.0%
- CAS No.: 51460-26-5
- Formula: C10H11N4NaO5S
- Molecular Weight:322.27
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Adrenergic Receptor Isoforms
More
Biological Activity
Description
In Vitro
Carbazochrome (0.1-10 μM) inhibits the Bradykinin induced and thrombin-induced formation of [3H]IP3 in a concentration-dependent manner[1]. Carbazochrome (0.1-1 μM), when included from 30 min before stimulation, significantly suppressed the enhancement of permeability induced by vasoactive substances[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Male Sprague-Dawley rats weighing 180-230 g[2]
-
Dosage:1, 5 and 10 mg/kg
-
Administration:I.v.; injected 30, 60, or 90 min before Ioxaglate injection (4 g I/kg, i.v.).
-
Result:Attenuated the Ioxaglate-increased vascular permeability at the dose of 1, 5 and 10 mg/kg in a dose-dependent manner, achieving statistical significance at 5 and 10 mg/kg.
Chemical Information
-
CAS No. 51460-26-5
-
Appearance Solid
-
Molecular Weight 322.27
-
Formula C10H11N4NaO5S
-
Color Yellow to orange
-
SMILES
O=S(C(CC1=C/C2=N/NC(N)=O)N(C)C1=CC2=O)(O[Na])=O
-
Synonyms
AC-17
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
In Vitro:
DMSO : ≥ 49 mg/mL (152.05 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : 6.67 mg/mL (20.70 mM; ultrasonic and warming and heat to 60°C)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.76 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Toshiaki Sendo, et al. Carbazochrome sodium sulfonate (AC-17) reverses endothelial barrier dysfunction through inhibition of phosphatidylinositol hydrolysis in cultured porcine endothelial cells. Naunyn Schmiedebergs Arch Pharmacol. 2003 Sep;368(3):175-80. [Content Brief]
[2]. Toshiaki Sendo, et al. Carbazochrome attenuates pulmonary dysfunction induced by a radiographic contrast medium in rats. Eur J Pharmacol. 2002 Aug 23;450(2):203-8. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 3.1030 mL | 15.5149 mL | 31.0299 mL | 77.5747 mL |
| 5 mM | 0.6206 mL | 3.1030 mL | 6.2060 mL | 15.5149 mL | |
| 10 mM | 0.3103 mL | 1.5515 mL | 3.1030 mL | 7.7575 mL | |
| 15 mM | 0.2069 mL | 1.0343 mL | 2.0687 mL | 5.1716 mL | |
| 20 mM | 0.1551 mL | 0.7757 mL | 1.5515 mL | 3.8787 mL | |
| DMSO | 25 mM | 0.1241 mL | 0.6206 mL | 1.2412 mL | 3.1030 mL |
| 30 mM | 0.1034 mL | 0.5172 mL | 1.0343 mL | 2.5858 mL | |
| 40 mM | 0.0776 mL | 0.3879 mL | 0.7757 mL | 1.9394 mL | |
| 50 mM | 0.0621 mL | 0.3103 mL | 0.6206 mL | 1.5515 mL | |
| 60 mM | 0.0517 mL | 0.2586 mL | 0.5172 mL | 1.2929 mL | |
| 80 mM | 0.0388 mL | 0.1939 mL | 0.3879 mL | 0.9697 mL | |
| 100 mM | 0.0310 mL | 0.1551 mL | 0.3103 mL | 0.7757 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Carbazochrome sodium sulfonate Related Classifications
HY-B0491A Related Classifications
Powered by Bioz