Ferene disodium
Based on 1 Customer Validation
Ferene disodium (Ferene S) is a chromogenic chelating agent used primarily as a specific detection reagent for Fe2+ and iron-binding proteins. Ferene disodium specifically recognizes iron ions by binding to Fe2+ to form a stable 3:1 chromogenic complex. Ferene disodium is used for the colorimetric quantitative determination of serum iron and lactoferrin.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza : 99.94%
- No. CAS: 79551-14-7
- Fòrmula: C16H8N4Na2O8S2
- Peso molecular:494.37
-
Almacenamiento:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Actividad biológica
-
Chemical Information
-
Solvente y solubilidad
- Pureza y Documentación
- Referencias
-
Help & FAQs
Actividad biológica
Descripciòn
In Vitro
Ferene disodium (Ferene S) (0.75 mM; 5 min to overnight) specifically binds and stains serum transferrin, ovotransferrin, lactoferrin in human milk, cytochrome C, and hemoglobin in polyacrylamide gels[2].
Ferene disodium is a highly water-soluble chromogenic chelating agent that selectively detects Fe2+, with a maximum absorption wavelength of 593 nm and a molar absorption coefficient of 34,500 cm-1 M-1, exhibiting approximately 1.3-fold higher sensitivity than Ferrozine[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
No. CAS 79551-14-7
-
Appearance Solid
-
Peso molecular 494.37
-
Fòrmula C16H8N4Na2O8S2
-
Color Light yellow to yellow
-
SMILES
O=S(C1=CC=C(C2=C(C3=CC=C(S(=O)(O[Na])=O)O3)N=C(C4=NC=CC=C4)N=N2)O1)(O[Na])=O
-
Synonyms
Ferene-S
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvente y solubilidad
In Vitro:
H2O : 100 mg/mL (202.28 mM; Need ultrasonic)
DMSO : 100 mg/mL (202.28 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (10.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Pureza y Documentación
-
Ficha de datos (293 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| H2O / DMSO | 1 mM | 2.0228 mL | 10.1139 mL | 20.2278 mL | 50.5694 mL |
| 5 mM | 0.4046 mL | 2.0228 mL | 4.0456 mL | 10.1139 mL | |
| 10 mM | 0.2023 mL | 1.0114 mL | 2.0228 mL | 5.0569 mL | |
| 15 mM | 0.1349 mL | 0.6743 mL | 1.3485 mL | 3.3713 mL | |
| 20 mM | 0.1011 mL | 0.5057 mL | 1.0114 mL | 2.5285 mL | |
| 25 mM | 0.0809 mL | 0.4046 mL | 0.8091 mL | 2.0228 mL | |
| 30 mM | 0.0674 mL | 0.3371 mL | 0.6743 mL | 1.6856 mL | |
| 40 mM | 0.0506 mL | 0.2528 mL | 0.5057 mL | 1.2642 mL | |
| 50 mM | 0.0405 mL | 0.2023 mL | 0.4046 mL | 1.0114 mL | |
| 60 mM | 0.0337 mL | 0.1686 mL | 0.3371 mL | 0.8428 mL | |
| 80 mM | 0.0253 mL | 0.1264 mL | 0.2528 mL | 0.6321 mL | |
| 100 mM | 0.0202 mL | 0.1011 mL | 0.2023 mL | 0.5057 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Ferene disodium Related Classifications
HY-D0170 Related Classifications
Powered by Bioz