Benzyldimethylstearylammonium chloride
Based on 1 Customer Validation
Benzyldimethylstearylammonium chloride (BDMSAC) is a quaternary ammonium cationic surfactant and a mixed-type corrosion inhibitor. Benzyldimethylstearylammonium chloride adsorbs onto the surface of cold-rolled steel through a combined effect of physisorption and chemisorption, forming a hydrophobic protective barrier that blocks active sites and restricts the diffusion of corrosive media, while simultaneously inhibiting the anodic iron dissolution reaction and the cathodic hydrogen evolution reaction, and reducing the corrosion rate in acidic media. Benzyldimethylstearylammonium chloride is used in research related to various fields such as fungicides, wastewater treatment, and detergents.
For research use only. We do not sell to patients.
- Purity : 98.0%
- CAS No.: 122-19-0
- Formula: C27H50ClN
- Molecular Weight:424.15
-
Storage:
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
HY-W011087
Benzyldimethyltetradecylammonium chloride -
HY-128443R
Benzyldimethylstearylammonium chloride (Standard) -
HY-B1260
Cetrimonium bromide -
HY-B1597
Cetalkonium chloride -
HY-W010795
Tetraheptylammonium bromide (>98%,BC) -
HY-W284558
Sodium hexadecyl sulfate -
HY-W010929
PYR14-TFSI -
HY-W110589
(3-Acrylamidopropyl)trimethylammonium chloride -
HY-W014408
Tetraethylammonium bromide -
HY-W011087R
Benzyldimethyltetradecylammonium chloride (Standard) -
HY-D0839
Tetradecyltrimethylammonium bromide -
HY-W007801
Tetrapropylammonium perruthenate
Biological Activity
Description
In Vitro
Benzyldimethylstearylammonium chloride (BDMSAC) effectively inhibits the corrosion of cold-rolled steel in 0.10 M Cl2CHCOOH solution[1].
Benzyldimethylstearylammonium chloride acts as a mixed-type corrosion inhibitor at 20 °C, with a polarization corrosion inhibition efficiency of 89.14% and an EIS corrosion inhibition efficiency of 82% at 10 mg/L, and the polarization resistance increases to 1744.6 Ω cm2[1].
Benzyldimethylstearylammonium chloride forms a hydrophobic protective adsorption film on the steel surface, which reduces H+ consumption during the corrosion process[1].
Benzyldimethylstearylammonium chloride (BDMSAC) increases the water contact angle of CRS in 1.0 M HCl in a concentration-dependent manner and decreases its surface free energy[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 122-19-0
-
Appearance Solid
-
Molecular Weight 424.15
-
Formula C27H50ClN
-
Color White to off-white
-
SMILES
CCCCCCCCCCCCCCCCCC[N+](C)(C)CC1=CC=CC=C1.[Cl-]
-
Synonyms
BDMSAC
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture and light
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
Solvent & Solubility
In Vitro:
DMSO : 125 mg/mL (294.71 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.90 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.3577 mL | 11.7883 mL | 23.5766 mL | 58.9414 mL |
| 5 mM | 0.4715 mL | 2.3577 mL | 4.7153 mL | 11.7883 mL | |
| 10 mM | 0.2358 mL | 1.1788 mL | 2.3577 mL | 5.8941 mL | |
| 15 mM | 0.1572 mL | 0.7859 mL | 1.5718 mL | 3.9294 mL | |
| 20 mM | 0.1179 mL | 0.5894 mL | 1.1788 mL | 2.9471 mL | |
| 25 mM | 0.0943 mL | 0.4715 mL | 0.9431 mL | 2.3577 mL | |
| 30 mM | 0.0786 mL | 0.3929 mL | 0.7859 mL | 1.9647 mL | |
| 40 mM | 0.0589 mL | 0.2947 mL | 0.5894 mL | 1.4735 mL | |
| 50 mM | 0.0472 mL | 0.2358 mL | 0.4715 mL | 1.1788 mL | |
| 60 mM | 0.0393 mL | 0.1965 mL | 0.3929 mL | 0.9824 mL | |
| 80 mM | 0.0295 mL | 0.1474 mL | 0.2947 mL | 0.7368 mL | |
| 100 mM | 0.0236 mL | 0.1179 mL | 0.2358 mL | 0.5894 mL |
Benzyldimethylstearylammonium chloride Related Classifications
HY-128443 Related Classifications
Powered by Bioz
Keywords
- Benzyldimethylstearylammonium
- 122-19-0
- BDMSAC
- Biochemical Assay Reagents
- bactericidal agent
- Fe(001) surface
- cold rolled steel
- anodic iron dissolution
- quaternary ammonium cationic surfactant
- phase transfer catalyst
- chemisorption
- physisorption
- cathodic hydrogen evolution reactions
- mixed-type corrosion inhibitor
- Inhibitor
- inhibitor
- inhibit