BI-6C9
Based on 3 publication(s) in Google Scholar
BI-6C9 is a highly specific BH3 interacting domain (Bid) inhibitor, which prevents mitochondrial outer membrane potential (MOMP) and mitochondrial fission, and protects the cells from mitochondrial apoptosis inducing factor (AIF) release and caspase-independent cell death in neurons.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.47%
- CAS No.: 791835-21-7
- Formule: C23H25N3O4S2
- Masse moléculaire:471.59
-
Stockage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Metabolism/Protease Compound Library
HY-L012
-
Stem Cell Signaling Compound Library
HY-L017
-
Anti-Aging Compound Library
HY-L034
-
Glutamine Metabolism Compound Library
HY-L064
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Mitochondria-Targeted Compound Library
HY-L089
-
Glucose Metabolism Compound Library
HY-L092
-
Protein-protein Interaction Inhibitor Library
HY-L109
-
Cuproptosis Compound Library
HY-L133
-
Mitochondrial Protection Compound Library
HY-L144
-
Metabolic Enzyme Compound Library
HY-L146
-
Highly Selective Inhibitors Library
HY-L158
-
Cell Death Library
HY-L162
-
Mitophagy Compound Library
HY-L180
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) BI-6C9
More
Activité biologique
HT-22 cells shows reduction of cell viability around 4.5 h after Glutamate (3 mM and 5 mM) treatment. BI-6c9 (10 μM; 18 hours) significantly attenuates the loss of cell viability after Glutamate excitotoxicity[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:HT-22 cells
-
Concentration:10 μM
-
Incubation Time:18 hours
-
Result:Attenuated Glutamate-induced cell death.
Chemical Information
-
CAS No. 791835-21-7
-
Appearance Solid
-
Masse moléculaire 471.59
-
Formule C23H25N3O4S2
-
Color White to off-white
-
SMILES
O=C(NC1=CC=C(SC2=CC=C(N)C=C2)C=C1)CCCNS(=O)(C3=CC=C(OC)C=C3)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Redox Biol
Lactate-driven ATP6V1B2 lactylation triggers asthmatic inflammation by linking lysosomal dysfunction to mitochondrial ROS-dependent pyroptosis. [Abstract]2026 Mar:90:104059. PMID: 41637881 -
Cell Commun Signal
Hainanenin-1, an oncolytic peptide, triggers immunogenic cell death via STING activation in triple-negative breast cancer. [Abstract]2024 Jul 5;22(1):352. PMID: 38970078 -
Solvant et solubilité
DMSO : 250 mg/mL (530.12 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.41 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (270 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1205 mL | 10.6024 mL | 21.2049 mL | 53.0122 mL |
| 5 mM | 0.4241 mL | 2.1205 mL | 4.2410 mL | 10.6024 mL | |
| 10 mM | 0.2120 mL | 1.0602 mL | 2.1205 mL | 5.3012 mL | |
| 15 mM | 0.1414 mL | 0.7068 mL | 1.4137 mL | 3.5341 mL | |
| 20 mM | 0.1060 mL | 0.5301 mL | 1.0602 mL | 2.6506 mL | |
| 25 mM | 0.0848 mL | 0.4241 mL | 0.8482 mL | 2.1205 mL | |
| 30 mM | 0.0707 mL | 0.3534 mL | 0.7068 mL | 1.7671 mL | |
| 40 mM | 0.0530 mL | 0.2651 mL | 0.5301 mL | 1.3253 mL | |
| 50 mM | 0.0424 mL | 0.2120 mL | 0.4241 mL | 1.0602 mL | |
| 60 mM | 0.0353 mL | 0.1767 mL | 0.3534 mL | 0.8835 mL | |
| 80 mM | 0.0265 mL | 0.1325 mL | 0.2651 mL | 0.6627 mL | |
| 100 mM | 0.0212 mL | 0.1060 mL | 0.2120 mL | 0.5301 mL |
BI-6C9 Related Classifications
HY-103661 Related Classifications
Powered by Bioz