Cyclohexaneacetic acid
Based on 1 Customer Validation
Cyclohexaneacetic acid is a model naphthenic acid and saturated cyclic acetic acid, and can serve as a monomeric component in naphthenic acid mixtures. Cyclohexaneacetic acid can be biodegraded via β-oxidation and is commonly used as a substrate for studying the degradation of model naphthenic acids by microalgae and microbial inocula. Cyclohexaneacetic acid can slow the growth of Botryococcus braunii and prolong the lag phase of both microalgae. Cyclohexaneacetic acid can be used in research related to environmental remediation.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.78%
- CAS No.: 5292-21-7
- 화학식: C8H14O2
- 분자량:142.20
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
All Endogenous Metabolite Isoforms
More
Biological Activity
제품 설명
IC50 & Target
[1]|
Microbial Metabolite |
In Vitro
Cyclohexaneacetic acid (100-300 mg/L; 80 d) did not significantly inhibit C. kessleri, but slowed the growth of B. braunii, while at high concentrations it induced a 15-30 d lag phase in C. kessleri and B. braunii[1].
Cyclohexaneacetic acid (100 mg/L; up to 120 d) can be removed by C. kessleri and B. braunii, with B. braunii exhibiting a lag phase of 60 d and C. kessleri exhibiting a lag phase of 40 d[1].
Cyclohexaneacetic acid (100 mg/L; 60 d) was consumed by the co-culture of C. kessleri and BML inoculum at rates of 3.32, 4.46, and 9.00 mg L-1 d-1[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. .
Chemical Information
-
CAS No. 5292-21-7
-
Appearance Solid
-
분자량 142.20
-
화학식 C8H14O2
-
Color Colorless to off-white
-
SMILES
O=C(O)CC1CCCCC1
-
Structure Classification
-
Initial Source
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 100 mg/mL (703.23 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (17.58 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (17.58 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (278 KB)
-
SDS (394 KB)
- English - EN (394 KB)
- Français - FR (394 KB)
- Deutsch - DE (394 KB)
- Norwegian - NO (394 KB)
- Español - ES (394 KB)
- Swedish - SV (394 KB)
- Italian - IT (394 KB)
- Korean - KR (394 KB)
- Portuguese - PT (394 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 7.0323 mL | 35.1617 mL | 70.3235 mL | 175.8087 mL |
| 5 mM | 1.4065 mL | 7.0323 mL | 14.0647 mL | 35.1617 mL | |
| 10 mM | 0.7032 mL | 3.5162 mL | 7.0323 mL | 17.5809 mL | |
| 15 mM | 0.4688 mL | 2.3441 mL | 4.6882 mL | 11.7206 mL | |
| 20 mM | 0.3516 mL | 1.7581 mL | 3.5162 mL | 8.7904 mL | |
| 25 mM | 0.2813 mL | 1.4065 mL | 2.8129 mL | 7.0323 mL | |
| 30 mM | 0.2344 mL | 1.1721 mL | 2.3441 mL | 5.8603 mL | |
| 40 mM | 0.1758 mL | 0.8790 mL | 1.7581 mL | 4.3952 mL | |
| 50 mM | 0.1406 mL | 0.7032 mL | 1.4065 mL | 3.5162 mL | |
| 60 mM | 0.1172 mL | 0.5860 mL | 1.1721 mL | 2.9301 mL | |
| 80 mM | 0.0879 mL | 0.4395 mL | 0.8790 mL | 2.1976 mL | |
| 100 mM | 0.0703 mL | 0.3516 mL | 0.7032 mL | 1.7581 mL |
Cyclohexaneacetic acid Related Classifications
HY-W018653 Related Classifications
Powered by Bioz
Keywords