1. GPCR/G Protein Metabolic Enzyme/Protease
  2. Angiotensin Receptor Angiotensin-converting Enzyme (ACE) Endogenous Metabolite
  3. Talfirastide

Talfirastide  (Synonyms: TXA127; Angiotensin (1-7); Ang-(1-7))

製品番号: HY-12403 純度: 99.88%
COA 取扱説明書

Angiotensin 1-7 (Ang-(1-7)) is an endogenous heptapeptide from the renin-angiotensin system (RAS) with a cardioprotective role due to its anti-inflammatory and anti-fibrotic activities in cardiac cells. Angiotensin 1-7 inhibits purified canine ACE activity (IC50=0.65 μM). Angiotensin 1-7 acts as a local synergistic modulator of kinin-induced vasodilation by inhibiting ACE and releasing nitric oxide. Angiotensin 1-7 blocks Ang II-induced smooth muscle cell proliferation and hypertrophy and shows antiangiogenic and growth-inhibitory effects on the endothelium. Angiotensin 1-7 shows anti-inflammatory activity .

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

カスタムペプチド合成

Talfirastide 構造式

Talfirastide 構造式

CAS 番号 : 51833-78-4

容量 価格(税別) 在庫状況 数量
Solid + Solvent
10 mM * 1 mL in Water
ready for reconstitution
USD 105 在庫あり
Solution
10 mM * 1 mL in Water USD 105 在庫あり
Solid
5 mg USD 66 在庫あり
10 mg USD 106 在庫あり
25 mg USD 158 在庫あり
50 mg USD 277 在庫あり
100 mg   お問い合わせ  
200 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 9 publication(s) in Google Scholar

Other Forms of Talfirastide:

Top Publications Citing Use of Products

Angiotensin Receptor アイソフォーム固有の製品をすべて表示:

  • 生物活性

  • プロトコル

  • 純度とドキュメンテーション

  • 参考文献

  • カスタマーレビュー

製品説明

Angiotensin 1-7 (Ang-(1-7)) is an endogenous heptapeptide from the renin-angiotensin system (RAS) with a cardioprotective role due to its anti-inflammatory and anti-fibrotic activities in cardiac cells. Angiotensin 1-7 inhibits purified canine ACE activity (IC50=0.65 μM). Angiotensin 1-7 acts as a local synergistic modulator of kinin-induced vasodilation by inhibiting ACE and releasing nitric oxide. Angiotensin 1-7 blocks Ang II-induced smooth muscle cell proliferation and hypertrophy and shows antiangiogenic and growth-inhibitory effects on the endothelium. Angiotensin 1-7 shows anti-inflammatory activity [1][2][3].

IC50 & Target

AT1 Receptor

 

体外実験

Angiotensin 1-7 (Ang-(1-7)) inhibits cultured vascular smooth muscle cell growth, whereas equal molar concentration of Ang II stimulates cell growth[2].
? Angiotensin 1-7 (Ang 1-7) abrogates the methylglyoxal-modified albumin (MGA)-stimulated myofibroblast phenotype by inhibiting the chronic stimulation of the TGF-β-ERK pathway in NRK-52E cells[4].
? Angiotensin 1-7 signals through the Mas receptor ( MasR) in opposition to Ang II/angiotensin II type 1 receptor (AT1R), promoting anti-inflammatory,vasodilatory, and neuroprotective effects[5].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

体内実験

Daily Angiotensin 1-7 (Ang-(1-7)) treatment (0.01-0.06 mg/kg) results in significant amelioration of DSS-induced colitis. Colitis-associated phosphorylation of p38, ERK1/2 and Akt is reduced by Ang 1-7 treatment[3].

MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

分子量

899.00

分子式

C41H62N12O11

CAS 番号
Appearance

Solid

Color

White to off-white

Sequence Shortening

DRVYIHP

Structure Classification
Initial Source
輸送条件

Room temperature in continental US; may vary elsewhere.

保管条件
Sealed storage, away from moisture
Powder -80°C 2 years
  -20°C 1 year
In solvent -80°C 6 months
  -20°C 1 month
溶剤 & 溶解度
体外: 

H2O : 25 mg/mL (27.81 mM; ultrasonic and warming and heat to 60°C)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.1123 mL 5.5617 mL 11.1235 mL
5 mM 0.2225 mL 1.1123 mL 2.2247 mL
10 mM 0.1112 mL 0.5562 mL 1.1123 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • Molarity Calculator

  • Dilution Calculator

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

体内:

For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  PBS

    Solubility: 100 mg/mL (111.23 mM); Clear solution; Need ultrasonic

In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Calculation results:
Working solution concentration: mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
純度とドキュメンテーション

純度: 99.91%

参考文献
キナーゼ実験
[1]

Competition assays using purified canine ACE are determined using a fixed concentration of the substrate Hip-His-Leu (1 mM) and varying the concentrations of the competing agents [Lisinopril (0.1 to 100 nM), Angiotensin (1-7) (10 nM to 10 μM), or Sar1, Thr8-Ang II (10 nM to 10 μM)]. Inhibitory constants (IC50) are determined from the respective competition curves. To study the effect of Angiotensin (1-7) on BK metabolism in intact coronary rings, 125I-[Tyr0]-BK (final concentration of 1 nM) is added to the tubes containing three rings preincubated with 1 mL Krebs' buffer and aerated with 95% O2 and 5% CO2 at 37°C. Lisinopril (2 μM), Angiotensin (1-7) (2 μM), or Krebs' buffer as control are added to the rings 10 minutes before addition of the radiolabeled BK. Aliquots of the incubation medium are removed at 5, 10, and 20 minutes and diluted with 1% HFBA to inhibit peptidase activity[1].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

細胞実験
[2]

500 μM Methylglyoxal is incubated with 100 μM BSA dissolved in phosphate buffered saline (PBS) for 24 hours, then washed on 10 kDa filters to remove excess methyl glyoxal, reconstituted with DMEM/F12 serum free media and passed through a 0.2 μmicron filter. TGF-β (5 ng/mL) is prepared to treat cells in a subset of experiments. Cells are co-treated with one or combinations of the following: Angiotensin (1-7) (100 nM), D-Ala7-Ang-(1-7) (10 μM), ERK1/2 kinase inhibitor, PD 98059 (1 μM), TGF-β receptor kinase inhibitor; SB525334 (1 μM), the AT1 receptor antagonist Losartan (1 μM), the renin inhibitor Aliskerin (1 μM) and the ACE inhibitor Lisinopril (1 μM)[2].

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

動物実験
[3][4]

Mice[3]
Male and female BALB/c mice (1:1 ratio, 6-10 weeks old, mean weight 20 g.) are used. Angiotensin fragment 1-7 acetate salt hydrate (Ang 1-7) is dissolved in 0.9% saline (vehicle) at 1 mg/mL and stored at -80°C. Various doses (0.01, 0.06, 0.1, 0.3 and 1 mg/kg) are freshly prepared from the stock each day of the experiment, and administered to mice by daily intra-peritoneal (i.p) injections in a volume of 500 μL per injection, either before (prophylactic approach) or after (treatment approach) DSS treatment. A779 (MAS-1 R antagonist) is similarly dissolved in distilled water at 1 mg/mL and stored at -80°C. A freshly prepared dose of 1 mg/kg is administered to a second group of mice by daily i.p injections in a volume of 500 μL daily (for 4 days) along with colitis induction (prophylactic approach). A third group of mice receive DSS containing water and daily i.p injections of 0.9% saline (vehicle). The fourth group receive DSS containing water along with daily i.p injections with Dexamethasone (DEX) at doses of 0.01-1.0 mg/kg or its vehicle (0.9% saline) (prophylactic approach).
Rats[4]
Twenty six ovariectomized female Wistar rats weighing 200±20 g are used. Angiotensin (1-7) is administered intravenously by a microsyringe pump at two different continuous doses of 100 and 300 ng/kg/min after antagonist/saline infusion. Each dose is infused for 15 min; and MAP, RPP, and RBF are recorded during Angiotensin (1-7) infusion and the last 3-5 min of each dose measured as “response to Angiotensin (1-7) infusion”. During Angiotensin (1-7) infusion, RPP is sustained at pre-Ang1-7 infusion levels via an adjustable aortic clamp.

MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。

参考文献

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
H2O 1 mM 1.1123 mL 5.5617 mL 11.1235 mL 27.8087 mL
5 mM 0.2225 mL 1.1123 mL 2.2247 mL 5.5617 mL
10 mM 0.1112 mL 0.5562 mL 1.1123 mL 2.7809 mL
15 mM 0.0742 mL 0.3708 mL 0.7416 mL 1.8539 mL
20 mM 0.0556 mL 0.2781 mL 0.5562 mL 1.3904 mL
25 mM 0.0445 mL 0.2225 mL 0.4449 mL 1.1123 mL

* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
  • Molarity Calculator

  • Dilution Calculator

The molarity calculator equation

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass   Concentration   Volume   Molecular Weight *
= × ×

The dilution calculator equation

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
× = ×
C1   V1   C2   V2
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

最近チェックした製品:

オンラインお問い合わせ

Your information is safe with us. * Required Fields.

製品名

 

タイトル

お名前 *

 

PC 用メールアドレス *

電話番号 *

 

勤務先/学校名 *

Department *

 

カスタマ需要量 *

国会或いは地域 *

     

必ず会社名を記載ください。個人への返信は行いません。

メッセージ

バルクお問い合わせ

Inquiry Information

製品名:
Talfirastide
製品番号:
HY-12403
数量:
MCE 日本正規代理店: