Aminopeptidase-IN-1
Based on 1 Customer Validation
Aminopeptidase-IN-1 is an insulin-regulated aminopeptidase (IRAP) inhibitor with an Ki value of 7.7 μM. Aminopeptidase-IN-1 can be used for the research of memory impairments.
For research use only. We do not sell to patients.
- Purity: 98.25%
- CAS No.: 374102-08-6
- Formula: C18H16N2O6
- Molecular Weight:356.33
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
Ki: 7.7 μM (IRAP)[1]
Aminopeptidase-IN-1 (Compound 16o) (0.01-100 μM; 30 min at 37 °C) potently inhibits IRAP activity in solubilized membranes from pCI-IRAP-transfected HEKT cells with a Ki of 7.7 μM[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 374102-08-6
-
Appearance Solid
-
Molecular Weight 356.33
-
Formula C18H16N2O6
-
Color Light yellow to yellow
-
SMILES
O=C(C1=C(N)OC2=CC(O)=CC=C2C1C3=CC=C([N+]([O-])=O)C=C3)OCC
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Solvent & Solubility
DMSO : 100 mg/mL (280.64 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.02 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8064 mL | 14.0319 mL | 28.0639 mL | 70.1597 mL |
| 5 mM | 0.5613 mL | 2.8064 mL | 5.6128 mL | 14.0319 mL | |
| 10 mM | 0.2806 mL | 1.4032 mL | 2.8064 mL | 7.0160 mL | |
| 15 mM | 0.1871 mL | 0.9355 mL | 1.8709 mL | 4.6773 mL | |
| 20 mM | 0.1403 mL | 0.7016 mL | 1.4032 mL | 3.5080 mL | |
| 25 mM | 0.1123 mL | 0.5613 mL | 1.1226 mL | 2.8064 mL | |
| 30 mM | 0.0935 mL | 0.4677 mL | 0.9355 mL | 2.3387 mL | |
| 40 mM | 0.0702 mL | 0.3508 mL | 0.7016 mL | 1.7540 mL | |
| 50 mM | 0.0561 mL | 0.2806 mL | 0.5613 mL | 1.4032 mL | |
| 60 mM | 0.0468 mL | 0.2339 mL | 0.4677 mL | 1.1693 mL | |
| 80 mM | 0.0351 mL | 0.1754 mL | 0.3508 mL | 0.8770 mL | |
| 100 mM | 0.0281 mL | 0.1403 mL | 0.2806 mL | 0.7016 mL |
Aminopeptidase-IN-1 Related Classifications
HY-151518 Related Classifications
Powered by Bioz