Cholesterol β-D-glucoside
Based on 1 Customer Validation
Cholesterol β-D-glucoside (Cholesteryl glucoside) is a heat shock transcription factor 1 (HSF1) activator. Cholesterol β-D-glucoside induces HSP70 in fibroblast cells.
For research use only. We do not sell to patients.
- Purity: 99.38%
- CAS No.: 7073-61-2
- Formula: C33H56O6
- Molecular Weight:548.79
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
Biological Activity
Chemical Information
-
CAS No. 7073-61-2
-
Appearance Solid
-
Molecular Weight 548.79
-
Formula C33H56O6
-
Color White to off-white
-
SMILES
C[C@@]12[C@]3([H])[C@](CC=C1C[C@H](CC2)O[C@@H]4O[C@@H]([C@H]([C@@H]([C@H]4O)O)O)CO)([H])[C@@]5([H])[C@](CC3)([C@@](CC5)([H])[C@H](C)CCCC(C)C)C
-
Synonyms
Cholesteryl glucoside
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 200 mg/mL (364.44 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5 mg/mL (9.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5 mg/mL (9.11 mM); Clear solution
This protocol yields a clear solution of ≥ 5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (50.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8222 mL | 9.1110 mL | 18.2219 mL | 45.5548 mL |
| 5 mM | 0.3644 mL | 1.8222 mL | 3.6444 mL | 9.1110 mL | |
| 10 mM | 0.1822 mL | 0.9111 mL | 1.8222 mL | 4.5555 mL | |
| 15 mM | 0.1215 mL | 0.6074 mL | 1.2148 mL | 3.0370 mL | |
| 20 mM | 0.0911 mL | 0.4555 mL | 0.9111 mL | 2.2777 mL | |
| 25 mM | 0.0729 mL | 0.3644 mL | 0.7289 mL | 1.8222 mL | |
| 30 mM | 0.0607 mL | 0.3037 mL | 0.6074 mL | 1.5185 mL | |
| 40 mM | 0.0456 mL | 0.2278 mL | 0.4555 mL | 1.1389 mL | |
| 50 mM | 0.0364 mL | 0.1822 mL | 0.3644 mL | 0.9111 mL | |
| 60 mM | 0.0304 mL | 0.1518 mL | 0.3037 mL | 0.7592 mL | |
| 80 mM | 0.0228 mL | 0.1139 mL | 0.2278 mL | 0.5694 mL | |
| 100 mM | 0.0182 mL | 0.0911 mL | 0.1822 mL | 0.4555 mL |