GPR120 Agonist 3
Based on 2 publication(s) in Google Scholar
GPR120 Agonist 3 is a selective Gpr120 agonist with a logEC50 of 7.62.
For research use only. We do not sell to patients.
- Purity: 99.51%
- CAS No.: 1599477-75-4
- Formula: C19H23ClF3NO3
- Molecular Weight:405.84
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
Publications Citing Use of MedChemExpress (MCE) GPR120 Agonist 3
More
Biological Activity
logEC50: 7.62[1]
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| CHO-K1 | EC50 |
33 nM
Compound: 14
|
Agonist activity at mouse GPR120 expressed in CHOK1 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
Agonist activity at mouse GPR120 expressed in CHOK1 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
|
[PMID: 28105274] |
| CHO-K1 | EC50 |
66 nM
Compound: 14
|
Agonist activity at ARMS2-PK2 -tagged human GPR120 short isoform expressed in CHOK1 cells assessed as induction of beta-arrestin2 recruitment after 90 mins by luminescence assay
Agonist activity at ARMS2-PK2 -tagged human GPR120 short isoform expressed in CHOK1 cells assessed as induction of beta-arrestin2 recruitment after 90 mins by luminescence assay
|
[PMID: 28105274] |
| CHO-K1 | EC50 |
98 nM
Compound: 14
|
Agonist activity at human GPR120 short isoform expressed in CHOK1 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
Agonist activity at human GPR120 short isoform expressed in CHOK1 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
|
[PMID: 28105274] |
| HEK293 | EC50 |
>10000 nM
Compound: 14
|
Agonist activity at human GPR40 expressed in HEK293 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
Agonist activity at human GPR40 expressed in HEK293 cells assessed as induction of IP1 accumulation after 60 mins by HTRF assay
|
[PMID: 28105274] |
| U2OS | EC50 |
54 nM
Compound: 14
|
Agonist activity at mouse GPR120 expressed in U2OS cells assessed as induction of beta-arrestin2 recruitment after 90 mins by luminescence assay
Agonist activity at mouse GPR120 expressed in U2OS cells assessed as induction of beta-arrestin2 recruitment after 90 mins by luminescence assay
|
[PMID: 28105274] |
GPR120 Agonist 3 is fully selective for Gpr120 (logEC50= 7.62) with negligible activity towards Gpr40. GPR120 Agonist 3 produces concentration dependent increases in IP3 production from both human and mouse Gpr120 expressing cells. GPR120 Agonist 3 leads to a concentration-dependent response to recruit β-arrestin-2 in both human and mouse Gpr120 expressing cells, with EC50s of ~0.35 μM. GPR120 Agonist 3 strongly and comparably inhibits LPS-induced phosphorylation of Tak1, Ikkβ, and Jnk and blocked IκB degradation [1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 1599477-75-4
-
Appearance Solid
-
Molecular Weight 405.84
-
Formula C19H23ClF3NO3
-
Color White to off-white
-
SMILES
O=C(O)CC(CC1)CCC21CCN(C3=CC(OC(F)(F)F)=CC=C3Cl)CC2
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (2)
-
Journal Impact Factor
-
Most Recent
-
Nat Commun
Human iPSC-based Modeling of Pulmonary Fibrosis Reveals p300/CBP Inhibition Suppresses Alveolar Transitional Cell State. [Abstract]2026 Feb 12;17(1):1214. PMID: 41680175 -
Acta Physiol (Oxf)
2019 May;226(1):e13215. PMID: 30375738
Solvent & Solubility
DMSO : ≥ 50 mg/mL (123.20 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
H2O : < 0.1 mg/mL (insoluble)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.16 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
Mice: Male C57Bl/6 WT or Gpr120 KO littermates are fed a normal chow (13.5% fat) or high-fat diet (60% fat) ad libitum for 15-20 weeks from 8 weeks of age. After 15 weeks on HFD, WT and Gpr120 KO mice are switched to an isocaloric HFD supplemented with ω3-FA concentrate or 30 mg/kg GPR120-IN-1 and fed for 5 weeks. Mice receive fresh diet every 3rd day, and food consumption and body weight are monitored[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Purity & Documentation
-
Data Sheet (272 KB)
-
SDS (396 KB)
- English - EN (396 KB)
- Français - FR (396 KB)
- Deutsch - DE (396 KB)
- Norwegian - NO (396 KB)
- Español - ES (396 KB)
- Swedish - SV (396 KB)
- Italian - IT (396 KB)
- Portuguese - PT (396 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4640 mL | 12.3201 mL | 24.6403 mL | 61.6006 mL |
| 5 mM | 0.4928 mL | 2.4640 mL | 4.9281 mL | 12.3201 mL | |
| 10 mM | 0.2464 mL | 1.2320 mL | 2.4640 mL | 6.1601 mL | |
| 15 mM | 0.1643 mL | 0.8213 mL | 1.6427 mL | 4.1067 mL | |
| 20 mM | 0.1232 mL | 0.6160 mL | 1.2320 mL | 3.0800 mL | |
| 25 mM | 0.0986 mL | 0.4928 mL | 0.9856 mL | 2.4640 mL | |
| 30 mM | 0.0821 mL | 0.4107 mL | 0.8213 mL | 2.0534 mL | |
| 40 mM | 0.0616 mL | 0.3080 mL | 0.6160 mL | 1.5400 mL | |
| 50 mM | 0.0493 mL | 0.2464 mL | 0.4928 mL | 1.2320 mL | |
| 60 mM | 0.0411 mL | 0.2053 mL | 0.4107 mL | 1.0267 mL | |
| 80 mM | 0.0308 mL | 0.1540 mL | 0.3080 mL | 0.7700 mL | |
| 100 mM | 0.0246 mL | 0.1232 mL | 0.2464 mL | 0.6160 mL |