Azido-PEG2-C2-amine
Based on 1 Customer Validation
Azido-PEG2-C2-amine (N3-PEG2-CH2CH2NH2) is a PEG-based PROTAC linker that can be used in the synthesis of PROTACs. Azido-PEG2-C2-amine is also a non-cleavable 2 unit PEG ADC linker used in the synthesis of antibody-drug conjugates (ADCs). Azido-PEG2-C2-amine is a click chemistry reagent, it contains an Azide group and can undergo copper-catalyzed azide-alkyne cycloaddition reaction (CuAAc) with molecules containing Alkyne groups. It can also undergo strain-promoted alkyne-azide cycloaddition (SPAAC) reactions with molecules containing DBCO or BCN groups.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 97.0%
- CAS No.: 166388-57-4
- 화학식: C6H14N4O2
- 분자량:174.20
-
보관:
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-128834
N3-PEG4-C2-NH2PROTAC Linkers -
HY-140212
Azido-PEG1-aminePROTAC Linker -
HY-140214
Azido-PEG5-aminePROTAC Linkers -
HY-130324
Azido-PEG7-amineADC/PROTAC Linker -
HY-151862
3-AzidopropylamineClick Chemistry Reagent -
HY-140217
Azido-PEG10-aminePROTAC Linker -
HY-W021401
Amino-PEG3-C2-Azido -
HY-140215
Azido-PEG6-aminePROTAC Linkers -
HY-140218
Azido-PEG11-aminePROTAC Linker -
HY-130653
Azido-PEG4-C2-acidPROTAC Linker -
HY-W008005
Amino-PEG4-alcohol -
HY-42490
N3-PEG3-CH2CH2COOHPROTAC Linker
All PROTAC Linkers Isoforms
More
Biological Activity
제품 설명
|
PEGs |
Non-cleavable Linker |
In Vitro
PROTACs contain two different ligands connected by a linker; one is a ligand for an E3 ubiquitin ligase and the other is for the target protein. PROTACs exploit the intracellular ubiquitin-proteasome system to selectively degrade target proteins[1].
ADCs are comprised of an antibody to which is attached an ADC cytotoxin through an ADC linker[2].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 166388-57-4
-
Appearance Liquid
-
분자량 174.20
-
화학식 C6H14N4O2
-
Color Colorless to light yellow
-
SMILES
[N-]=[N+]=NCCOCCOCCN
-
Synonyms
N3-PEG2-CH2CH2NH2
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
용액&용해도
In Vitro:
DMSO : ≥ 100 mg/mL (574.05 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (14.35 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (14.35 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (268 KB)
-
SDS (477 KB)
- English - EN (477 KB)
- Français - FR (477 KB)
- Deutsch - DE (477 KB)
- Norwegian - NO (477 KB)
- Español - ES (477 KB)
- Swedish - SV (477 KB)
- Italian - IT (477 KB)
- Korean - KR (477 KB)
- Portuguese - PT (477 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 5.7405 mL | 28.7026 mL | 57.4053 mL | 143.5132 mL |
| 5 mM | 1.1481 mL | 5.7405 mL | 11.4811 mL | 28.7026 mL | |
| 10 mM | 0.5741 mL | 2.8703 mL | 5.7405 mL | 14.3513 mL | |
| 15 mM | 0.3827 mL | 1.9135 mL | 3.8270 mL | 9.5675 mL | |
| 20 mM | 0.2870 mL | 1.4351 mL | 2.8703 mL | 7.1757 mL | |
| 25 mM | 0.2296 mL | 1.1481 mL | 2.2962 mL | 5.7405 mL | |
| 30 mM | 0.1914 mL | 0.9568 mL | 1.9135 mL | 4.7838 mL | |
| 40 mM | 0.1435 mL | 0.7176 mL | 1.4351 mL | 3.5878 mL | |
| 50 mM | 0.1148 mL | 0.5741 mL | 1.1481 mL | 2.8703 mL | |
| 60 mM | 0.0957 mL | 0.4784 mL | 0.9568 mL | 2.3919 mL | |
| 80 mM | 0.0718 mL | 0.3588 mL | 0.7176 mL | 1.7939 mL | |
| 100 mM | 0.0574 mL | 0.2870 mL | 0.5741 mL | 1.4351 mL |
Azido-PEG2-C2-amine Related Classifications
HY-140213 Related Classifications
Powered by Bioz