S1R agonist 2 hydrochloride
Based on 1 Customer Validation
S1R agonist 2 (Compound 8b) hydrochloride is a selective S1R agonist with Kis of 1.1 nM and 88 nM for S1R and S2R, respectively. S1R agonist 2 hydrochloride exhibits neuroprotection against ROS and NMDA-induced neurotoxicity.
For research use only. We do not sell to patients.
- Purity: ≥98.0%
- Formula: C21H28ClNO
- Molecular Weight:345.91
-
Storage:
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Sigma Receptor Isoforms
More
Biological Activity
Ki: 1.1 nM and 88 nM for S1R and S2R[1]
S1R agonist 2 (Compound 8b; 0.1-5 μM) hydrochloride significantly increases the nerve growth factor (NGF) induced neurite outgrowth at all the tested concentrations in a dose-dependent manner[1].
S1R agonist 2 (24 h) hydrochloride significantly prevents cell damage induced by Rotenone (HY-B1756) when tested at the concentration of 1 μM in SHSY5Y cells[1].
S1R agonist 2 (0.1-5 μM; 24 h) hydrochloride demonstrates a neuroprotective effect against NMDA stimuli in SHSY5Y cells[1].
S1R agonist 2 (0-10 μM; 24-72 h) hydrochloride shows no cytotoxicity against A549, LoVo and Panc-1 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
Appearance Solid
-
Molecular Weight 345.91
-
Formula C21H28ClNO
-
Color White to off-white
-
SMILES
[H]Cl.C1(OCCCN2CCC(CC2)CC3=CC=CC=C3)=CC=CC=C1
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
-20°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 100 mg/mL (289.09 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (7.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (7.23 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (270 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.8909 mL | 14.4546 mL | 28.9093 mL | 72.2731 mL |
| 5 mM | 0.5782 mL | 2.8909 mL | 5.7819 mL | 14.4546 mL | |
| 10 mM | 0.2891 mL | 1.4455 mL | 2.8909 mL | 7.2273 mL | |
| 15 mM | 0.1927 mL | 0.9636 mL | 1.9273 mL | 4.8182 mL | |
| 20 mM | 0.1445 mL | 0.7227 mL | 1.4455 mL | 3.6137 mL | |
| 25 mM | 0.1156 mL | 0.5782 mL | 1.1564 mL | 2.8909 mL | |
| 30 mM | 0.0964 mL | 0.4818 mL | 0.9636 mL | 2.4091 mL | |
| 40 mM | 0.0723 mL | 0.3614 mL | 0.7227 mL | 1.8068 mL | |
| 50 mM | 0.0578 mL | 0.2891 mL | 0.5782 mL | 1.4455 mL | |
| 60 mM | 0.0482 mL | 0.2409 mL | 0.4818 mL | 1.2046 mL | |
| 80 mM | 0.0361 mL | 0.1807 mL | 0.3614 mL | 0.9034 mL | |
| 100 mM | 0.0289 mL | 0.1445 mL | 0.2891 mL | 0.7227 mL |
S1R agonist 2 hydrochloride Related Classifications
HY-149804A Related Classifications
Powered by Bioz