1. GPCR/G Protein
  2. P2Y Receptor
  3. Cangrelor tetrasodium

Cangrelor tetrasodium  (Synonyms: AR-C69931MX tetrasodium)

Cat. No.: HY-19638A Pureté: 99.96%
Instruction de manipulation Technical Support

Cangrelor tetrasodium, an adenosine triphosphate analogue, is a reversible and selective platelet P2Y12 antagonist, with prompt and potent antiplatelet effects. Cangrelor tetrasodium directly blocks adenosine diphosphate (ADP)-induced activation and aggregation of platelets. Cangrelor tetrasodium is also a nonspecific GPR17 antagonist.

Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.

CAS No. : 163706-36-3

Size Prix Stock Quantité
Échantillon gratuit (0.1 - 0.2 mg)   Appliquer maintenant  
Solid + Solvent (Highly Recommended)
10 mM * 1 mL in DMSO
ready for reconstitution
En stock
Solution
10 mM * 1 mL in DMSO En stock
Solid
5 mg En stock
10 mg En stock
50 mg En stock
100 mg En stock
500 mg En stock
1 g   Obtenir un devis  
5 g   Obtenir un devis  

* Veuillez sélectionner la quantité avant d'ajouter des articles.

This product is a controlled substance and not for sale in your territory.

Avis client

Based on 4 publication(s) in Google Scholar

Other Forms of Cangrelor tetrasodium:

Top Publications Citing Use of Products

    Cangrelor tetrasodium purchased from MedChemExpress. Usage Cited in: Biochem Pharmacol. 2025 Oct 23:117451.  [Abstract]

    Determination of Avibactam, Lopromide, Cangrelor tetrasodium, Protirelin, and Ioxilan IC50 values in Huh7 and Hep3B cells.

    Cangrelor tetrasodium purchased from MedChemExpress. Usage Cited in: Int J Mol Sci. 2025 Feb 6;26(3):1381.  [Abstract]

    Weight changes in mice infected with and treated with H1N1-UI182. The combined results of the two studies showed that treatment with glecaprevir, Cangrelor tetrasodium (Cangrelor), acarbose, and everolimus significantly slowed the rate of weight loss in virus-infected mice.

    Cangrelor tetrasodium purchased from MedChemExpress. Usage Cited in: Mol Nutr Food Res. 2022 Jul;66(13):e2200166.  [Abstract]

    The EA. hy926 cells were pretreated with vehicle (M), OG-5 for 2 hours followed by stimulated with ADP for 4 hours, then the treated cells and supernatants were collected. The release of MCP-1 and VCAM-1 in supernatant were determined by ELISA kit and adhesion molecule ICAM-1 was determined in cell lysates. The results showed that treatment with OG-5 significantly inhibited the increase in ADP-induced MCP-1 and VCAM-1 production, showing a comparable effect with Cangrelor tetrasodium (0.5 µM) at the concentration of 0.5 mM.

    Cangrelor tetrasodium purchased from MedChemExpress. Usage Cited in: Mol Nutr Food Res. 2022 Jul;66(13):e2200166.  [Abstract]

    Immunoblotting and densitometric analyses of p-VASP (Ser157). Platelets were preincubated with vehicle and different concentrations of OG-5 for 5 min at 37 ℃, in the presence or absence of the specific inhibitors and then stimulated with agonist. The reaction was stopped by addition of RIPA buffer immediately and the cell lysates were applied to immunoblot analysis with phospho-specific antibody. The results showed that Cangrelor tet (0.5 μM) attenuated the 2MeS-ADP-induced reduction in p-VASP(S157) levels.
    • Activité biologique

    • Pureté et documentation

    • Références

    • Avis client

    Description

    Cangrelor tetrasodium, an adenosine triphosphate analogue, is a reversible and selective platelet P2Y12 antagonist, with prompt and potent antiplatelet effects. Cangrelor tetrasodium directly blocks adenosine diphosphate (ADP)-induced activation and aggregation of platelets. Cangrelor tetrasodium is also a nonspecific GPR17 antagonist[1][2].

    IC50 & Target

    P2Y12 Receptor

     

    Cellular Effect
    Cell Line Type Value Description References
    Platelet IC50
    0.4 1
    Compound: cangrelor
    Inhibition of ADP-induced platelet aggregation in human platelet rich plasma
    Inhibition of ADP-induced platelet aggregation in human platelet rich plasma
    [PMID: 22531380]
    Platelet IC50
    0.4 1
    Compound: cangrelor
    Inhibition of ADP-induced platelet aggregation in human platelet rich plasma
    Inhibition of ADP-induced platelet aggregation in human platelet rich plasma
    [PMID: 22531380]
    In Vitro

    Cangrelor tetrasodium is the only potent intravenous direct and specific adenosine diphosphate (ADP) P2Y12 receptor antagonist[1].
    ? Cangrelor tetrasodium has pKb of 8.6-9.2 for hP2Y12 receptor[3].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    In Vivo

    Cangrelor tetrasodium (10 mg/kg) not only significantly decreases BLM-induced release of inflammatory cytokines (PF4, CD40 L and MPO), but also decreases the increment of platelets, neutrophils and platelet-neutrophil aggregates in the fibrotic lung and in the peripheral blood of BLM-treated mice[2].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Essai clinique
    Masse moléculaire

    864.29

    Formule

    C17H21Cl2F3N5Na4O12P3S2

    CAS No.
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O[C@H]1[C@@H](O)[C@H](N2C3=NC(SCCC(F)(F)F)=NC(NCCSC)=C3N=C2)O[C@@H]1COP(OP(C(Cl)(P(O[Na])(O[Na])=O)Cl)(O[Na])=O)(O[Na])=O

    Livraison

    Room temperature in continental US; may vary elsewhere.

    Stockage

    4°C, sealed storage, away from moisture and light

    *In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)

    Solvant et solubilité
    In Vitro: 

    H2O : 100 mg/mL (115.70 mM; Need ultrasonic)

    DMSO : 12.5 mg/mL (14.46 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 1.1570 mL 5.7851 mL 11.5702 mL
    5 mM 0.2314 mL 1.1570 mL 2.3140 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • Calculateur de molarité

    • Calculateur de dilution

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    In Vivo:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: 1.25 mg/mL (1.45 mM); Clear solution; Need ultrasonic

      This protocol yields a clear solution of 1.25 mg/mL.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: 1.25 mg/mL (1.45 mM); Clear solution; Need ultrasonic

      This protocol yields a clear solution of 1.25 mg/mL.

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.

    For the following dissolution methods, please prepare the working solution directly. It is recommended to prepare fresh solutions and use them promptly within a short period of time.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  PBS

      Solubility: 100 mg/mL (115.70 mM); Clear solution; Need ultrasonic

    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Calculation results:
    Working solution concentration: mg/mL
    This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only.If necessary, please contact MedChemExpress (MCE).
    Pureté et documentation

    Purity: 99.96%

    Références

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO / H2O 1 mM 1.1570 mL 5.7851 mL 11.5702 mL 28.9255 mL
    5 mM 0.2314 mL 1.1570 mL 2.3140 mL 5.7851 mL
    10 mM 0.1157 mL 0.5785 mL 1.1570 mL 2.8925 mL
    H2O 15 mM 0.0771 mL 0.3857 mL 0.7713 mL 1.9284 mL
    20 mM 0.0579 mL 0.2893 mL 0.5785 mL 1.4463 mL
    25 mM 0.0463 mL 0.2314 mL 0.4628 mL 1.1570 mL
    30 mM 0.0386 mL 0.1928 mL 0.3857 mL 0.9642 mL
    40 mM 0.0289 mL 0.1446 mL 0.2893 mL 0.7231 mL
    50 mM 0.0231 mL 0.1157 mL 0.2314 mL 0.5785 mL
    60 mM 0.0193 mL 0.0964 mL 0.1928 mL 0.4821 mL
    80 mM 0.0145 mL 0.0723 mL 0.1446 mL 0.3616 mL
    100 mM 0.0116 mL 0.0579 mL 0.1157 mL 0.2893 mL

    * Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.

    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Vos produits récemment consultés:

    Demande en ligne

    Your information is safe with us. * Required Fields.

    Nom du produit

     

    Requested Quantity *

    Nom du demandeur *

     

    Civilité

    Adresse e-mail *

     

    Numéro de téléphone *

    Department

     

    Nom de l'organisation *

    City

    État

    Country or Region *

         

    Remarques

    Bulk Inquiry

    Inquiry Information

    Nom du produit:
    Cangrelor tetrasodium
    Cat. No.:
    HY-19638A
    Quantité:
    MCE Japan Authorized Agent: