2. Protein Tyrosine Kinase/RTK
  3. Bcr-Abl
  4. Asciminib

Asciminib  (Synonyms: ABL001)

製品番号: HY-104010 純度: 99.88%
COA 取扱説明書

Molarity Calculator

Asciminib (ABL001) is a potent and selective allosteric BCR-ABL1 inhibitor, which inhibits Ba/F3 cells grown with an IC50 of 0.25 nM.

商品は「研究用試薬」です。人や動物の医療用・臨床診断用・食品用の製品ではありません。
研究用途以外に使用した場合、当社は一切の責任を負いかねます。

Asciminib 構造式

Asciminib 構造式

CAS 番号 : 1492952-76-7

容量 価格（税別） 在庫状況 数量
無料サンプル (0.1 - 0.5 mg)   今すぐ申し込む  
Solid + Solvent
10 mM * 1 mL in DMSO
ready for reconstitution
 USD 187 在庫あり
Solution
10 mM * 1 mL in DMSO USD 187 在庫あり
Solid
5 mg USD 170 在庫あり
10 mg USD 240 在庫あり
25 mg USD 390 在庫あり
50 mg USD 550 在庫あり
100 mg USD 850 在庫あり
200 mg   お問い合わせ  
500 mg   お問い合わせ  

* アイテムを追加する前、数量をご選択ください

This product is a controlled substance and not for sale in your territory.

カスタマーレビュー

Based on 6 publication(s) in Google Scholar

Other Forms of Asciminib:

Asciminib 関連抗体

Top Publications Citing Use of Products

    Asciminib purchased from MedChemExpress. Usage Cited in: Cancer Immunol Immunother. 2023 Jan 5.  [Abstract]

    Asciminib (1.25, 5, 10 µM) inhibits proliferation of T cells.

    • 生物活性

    • プロトコル

    • 純度とドキュメンテーション

    • 参考文献

    • カスタマーレビュー

    製品説明

    Asciminib (ABL001) is a potent and selective allosteric BCR-ABL1 inhibitor, which inhibits Ba/F3 cells grown with an IC50 of 0.25 nM[1].

    体外実験

    Asciminib binds to the myristoyl pocket of ABL1 and induces the formation of an inactive kinase conformation. NMR and biophysical studies confirm that asciminib binds potently (dissociation constant=0.5-0.8nM) and selectively to the myristoyl pocket of ABL1 and induces the inactive C-terminal helix conformation. Asciminib binding mimics the structural consequences of myristate binding to the N terminus of ABL1. Consistent with this binding site, asciminib exhibits the same non-ATP-competitive biochemical kinetics as the BCR–ABL inhibitor GNF-2 but with approximately 100-fold greater potency. Asciminib lacks activity against more than 60 kinases, including SRC, and is similarly inactive against G-protein-coupled receptors, ion channels, nuclear receptors and transporters. In BCR–ABL1-transformed Ba/F3 cells grown without IL-3, asciminib has an anti-proliferative with IC50 value of 0.25nM. In the CML blast-phase cell line KCL-22, asciminib inhibits phosphorylation of both STAT5 (Tyr694; pSTAT5) and BCR–ABL1 (Tyr245; pBCR–ABL1) after 1h using concentrations that correlate with those required for inhibition of cell proliferation. Asciminib is selectively active against all BCR–ABL1 lines (IC50 value of 1–20nM), irrespective of the presence of either the p210 or the p190 BCR–ABL1 isoform.[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.

    Asciminib 関連抗体
    体内実験

    Asciminib is undergoing clinical development testing in patients with CML and Philadelphia chromosome-positive acute lymphoblastic leukaemia. Single doses of 7.5, 15 and 30 mg/kg ABL001, administered to mice bearing KCL- 22 xenografts, inhibits pSTAT5 (Tyr694), which return to baseline at 10, 12 and 16-20h after administration of the dose, respectively. In mice implanted with KCL-22 tumors, the minimum dose of asciminib required for complete regression is 7.5 mg/kg twice a day (BID) or 30 mg/kg once a day (QD), and is tolerated at doses up to 250 mg/kg BID. Similarly, in xenografts derived from patients, treatment with 7.5 and 30 mg/kg asciminib leads to regressions that are maintained during dosing[1].

    MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
    臨床実験
    分子量

    449.84

    分子式

    C20H18ClF2N5O3
    CAS 番号
    Appearance

    Solid

    Color

    White to off-white

    SMILES

    O=C(C1=CC(C2=NNC=C2)=C(N3C[C@H](O)CC3)N=C1)NC4=CC=C(OC(F)(Cl)F)C=C4
    輸送条件

    Room temperature in continental US; may vary elsewhere.
    保管条件
    Powder -20°C 3 years
      4°C 2 years
    In solvent -80°C 6 months
      -20°C 1 month
    溶剤 & 溶解度
    体外: 

    DMSO : 100 mg/mL (222.30 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

    Preparing
    Stock Solutions
    Concentration Solvent Mass 1 mg 5 mg 10 mg
    1 mM 2.2230 mL 11.1151 mL 22.2301 mL
    5 mM 0.4446 mL 2.2230 mL 4.4460 mL
    10 mM 0.2223 mL 1.1115 mL 2.2230 mL
    View the Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    • Molarity Calculator

    • Dilution Calculator

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass
    =
    Concentration
    ×
    Volume
    ×
    Molecular Weight *

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start)

    C1

    ×
    Volume (start)

    V1

    =
    Concentration (final)

    C2

    ×
    Volume (final)

    V2

    体内:

    Select the appropriate dissolution method based on your experimental animal and administration route.

    For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
    To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
    The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

    • Protocol 1

      Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

      Solubility: ≥ 2.5 mg/mL (5.56 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

      Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
    • Protocol 2

      Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

      Solubility: ≥ 2.5 mg/mL (5.56 mM); Clear solution

      This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).

      Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

      Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
    In Vivo Dissolution Calculator
    Please enter the basic information of animal experiments:

    Dosage

    mg/kg

    Animal weight
    (per animal)

    g

    Dosing volume
    (per animal)

    μL

    Number of animals

    Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
    Please enter your animal formula composition:
    %
    DMSO +
    % 
    +
    %
    Tween-80 +
    %
    Saline
    Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
    The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
    Calculation results:
    Working solution concentration: mg/mL
    Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).
    The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
    Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
     If the continuous dosing period exceeds half a month, please choose this protocol carefully.
    Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
    純度とドキュメンテーション

    純度: 99.88%

    COA (247 KB) LCMS (264 KB)

    取扱説明書 (2659 KB)
    参考文献
    細胞実験
    [1]

    Ba/F3 cells are treated with a range concentration of asciminib (0-10000 nM) for 48 h. Cell proliferation is measured using the Britelite luciferase detection assay[1].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
    動物実験
    [1]

    Mice: Asciminib efficacy in three patient-derived ALL systemic xenograft models (ALL-7015, AL-7119 and AL-7155) is assessed by FACS monitoring of the percentage of CD45+ cells per live cell in blood samples taken at varying time points after dosing with either 7.5 mg/kg BID (group 2) or 30 mg/kg BID (group 3) asciminib for 3 weeks[1].

    MedChemExpress (MCE) はこれらの方法の精度を確認していません。 こちらは参照専用です。
    参考文献

    Complete Stock Solution Preparation Table

    * Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
    Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

    Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
    DMSO 1 mM 2.2230 mL 11.1151 mL 22.2301 mL 55.5753 mL
    5 mM 0.4446 mL 2.2230 mL 4.4460 mL 11.1151 mL
    10 mM 0.2223 mL 1.1115 mL 2.2230 mL 5.5575 mL
    15 mM 0.1482 mL 0.7410 mL 1.4820 mL 3.7050 mL
    20 mM 0.1112 mL 0.5558 mL 1.1115 mL 2.7788 mL
    25 mM 0.0889 mL 0.4446 mL 0.8892 mL 2.2230 mL
    30 mM 0.0741 mL 0.3705 mL 0.7410 mL 1.8525 mL
    40 mM 0.0556 mL 0.2779 mL 0.5558 mL 1.3894 mL
    50 mM 0.0445 mL 0.2223 mL 0.4446 mL 1.1115 mL
    60 mM 0.0371 mL 0.1853 mL 0.3705 mL 0.9263 mL
    80 mM 0.0278 mL 0.1389 mL 0.2779 mL 0.6947 mL
    100 mM 0.0222 mL 0.1112 mL 0.2223 mL 0.5558 mL
    • No file chosen (Maximum size is: 1024 Kb)
    • If you have published this work, please enter the PubMed ID.
    • Your name will appear on the site.

    Asciminib Related Classifications

    • Molarity Calculator

    • Dilution Calculator

    The molarity calculator equation

    Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

    Mass   Concentration   Volume   Molecular Weight *
    = × ×

    The dilution calculator equation

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

    This equation is commonly abbreviated as: C1V1 = C2V2

    Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
    × = ×
    C1   V1   C2   V2
    Help & FAQs
    • Do most proteins show cross-species activity?

      Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

    Keywords:

    Asciminib1492952-76-7ABL001ABL 001ABL-001Bcr-AblInhibitorinhibitorinhibit

    最近チェックした製品:

    オンラインお問い合わせ

    Your information is safe with us. * Required Fields.

    製品名

    		  

    タイトル

    お名前 *

    		 

    PC 用メールアドレス *

    電話番号 *

    		 

    勤務先/学校名 *

    Department *

    		 

    カスタマ需要量 *

    国会或いは地域 *

    		      

    必ず会社名を記載ください。個人への返信は行いません。

    メッセージ

    バルクお問い合わせ

    Inquiry Information

    製品名:
    Asciminib
    製品番号:
    HY-104010
    数量:
    MCE 日本正規代理店:

    カスタマーレビュー

    Thank You for Your Feedback!

    Request for HNMR Report

    Please fill out this form to request the QC report. We will send it to your Email address shortly.

    Your information is safe with us. * Required Fields.

    製品名

    		  

    Lot #

    お名前 *

    		 

    PC 用メールアドレス *

    電話番号 *

    		 

    部門 *

    勤務先/学校名 *

    		 

    国会或いは地域 *

    メッセージ

    Request for HNMR Report

    We have received your request and will respond to you as soon as possible.