UZH1a
Based on 3 publication(s) in Google Scholar
UZH1a is a potent and selective METTL3 inhibitor, with an IC50 of 280 nM. UZH1a can be used for epitranscriptomic modulation of cellular processes. UZH1a has antitumor activity. UZH1a also can be used as a chemical probe for studying METTL3.
For research use only. We do not sell to patients.
- Purity: 99.90%
- CAS No.: 2813577-78-3
- Formula: C32H42N6O3
- Molecular Weight:558.71
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Apoptosis Compound Library
HY-L003
-
Anti-Cancer Compound Library
HY-L025
-
Targeted Diversity Library
HY-L099
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Activators Library
HY-L159
-
Cell Death Library
HY-L162
-
Bioactive Compound Library Max
HY-L181
-
MCE Bioactive Compound Library
HY-L001V
-
Bioactive Compound Library
HY-L001
-
Non-Alcoholic Fatty Liver Disease (NAFLD) Compound Library
HY-L199
-
High-Throughput Bioactive Compound Library
HY-L205
Publications Citing Use of MedChemExpress (MCE) UZH1a
More
Biological Activity
IC50: 280 nM (METTL3)[1]
UZH1a (2.5-160 μM; 72 h) inhibits the growth of MOLM-13, HEK293T, and U2Os cells, with IC50s of 11 μM, 67 μM, and 87 μM, respectively[1].
UZH1a (2.5-100 μM; 16 h) reduces m6A methylation level in mRNA from MOLM-13 cells in a dose-dependent manner (IC50=4.6 μM)[1].
UZH1a (40 μM; 16 h) reduces m6A methylation level in mRNA from MOLM-13, HEK293T, and U2Os cells[1].
UZH1a (20 μM; 16 h) increases apoptosis and leads to cell cycle arrest in MOLM-13 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Cell Line:MOLM-13, HEK293T, and U2Os cells
-
Concentration:2.5-160 µM
-
Incubation Time:72 hours
-
Result:Inhibited the growth of MOLM-13, HEK293T, and U2Os cells in a dose-dependent manner.
Chemical Information
-
CAS No. 2813577-78-3
-
Appearance Solid
-
Molecular Weight 558.71
-
Formula C32H42N6O3
-
Color Off-white to light yellow
-
SMILES
O=C(NC[C@@]1(O)CN(C2=NC=NC(NCC3=CC=CC=C3)=C2)CCC1)C4=CC=C(CN5CCC(C)(C)CC5)C=C4O
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
mBio
Epitranscriptomic m6A modifications during reactivation of HIV-1 latency in CD4+ T cells. [Abstract]2024 Nov 13;15(11):e0221424. PMID: 39373537 -
Front Microbiol
EBV Exploits RNA m6A Modification to Promote Cell Survival and Progeny Virus Production During Lytic Cycle. [Abstract]2022 Jun 15;13:870816. PMID: 35783391 -
Mol Biol Rep
2025 Nov 11;53(1):66. PMID: 41217561
Solvent & Solubility
DMSO : 80 mg/mL (143.19 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 5.5 mg/mL (9.84 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 5.5 mg/mL (9.84 mM); Clear solution
This protocol yields a clear solution of ≥ 5.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (55.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (276 KB)
-
SDS (254 KB)
- English - EN (254 KB)
- Français - FR (254 KB)
- Deutsch - DE (254 KB)
- Norwegian - NO (254 KB)
- Español - ES (254 KB)
- Swedish - SV (254 KB)
- Italian - IT (254 KB)
- Korean - KR (254 KB)
- Portuguese - PT (254 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.7898 mL | 8.9492 mL | 17.8984 mL | 44.7459 mL |
| 5 mM | 0.3580 mL | 1.7898 mL | 3.5797 mL | 8.9492 mL | |
| 10 mM | 0.1790 mL | 0.8949 mL | 1.7898 mL | 4.4746 mL | |
| 15 mM | 0.1193 mL | 0.5966 mL | 1.1932 mL | 2.9831 mL | |
| 20 mM | 0.0895 mL | 0.4475 mL | 0.8949 mL | 2.2373 mL | |
| 25 mM | 0.0716 mL | 0.3580 mL | 0.7159 mL | 1.7898 mL | |
| 30 mM | 0.0597 mL | 0.2983 mL | 0.5966 mL | 1.4915 mL | |
| 40 mM | 0.0447 mL | 0.2237 mL | 0.4475 mL | 1.1186 mL | |
| 50 mM | 0.0358 mL | 0.1790 mL | 0.3580 mL | 0.8949 mL | |
| 60 mM | 0.0298 mL | 0.1492 mL | 0.2983 mL | 0.7458 mL | |
| 80 mM | 0.0224 mL | 0.1119 mL | 0.2237 mL | 0.5593 mL | |
| 100 mM | 0.0179 mL | 0.0895 mL | 0.1790 mL | 0.4475 mL |
UZH1a Related Classifications
HY-134673A Related Classifications
Powered by Bioz