Neophytadiene
Based on 1 publication(s) in Google Scholar
Neophytadiene is a diterpene found in Turbinaria ornate, with anti-inflammatory antioxidant and cardioprotective properties.
For research use only. We do not sell to patients.
- Purity: 95.0%
- CAS No.: 504-96-1
- Formula: C20H38
- Molecular Weight:278.52
-
Storage:
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications Citing Use of MedChemExpress (MCE) Neophytadiene
More
Biological Activity
Neophytadiene has cytotoxic on RAW 264.7 cells with an IC50 of 50 μM[1].
Neophytadiene (50-100 μM; 30 min) successfully inhibits the NO production level and downregulates inducible nitric oxide synthase (iNOS) production in LPS (1 μg/mL)-induced RAW264.7 cells[1].
Neophytadiene (25-100 μM; 22 hours) significantly inhibits the NO production and inflammatory cytokines TNF-α, IL-6 and IL-10 and IL-10 in LPS (1 μg/mL)-induced RAW264.7 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Neophytadiene (25-50 mg/kg; p.o.; daily; for 7 days) significantly reduces LPS (10 mg/kg)-increased IL-6 and 1L-10 levels and in heart tissue[1].
Neophytadiene (25-50 mg/kg; p.o.; daily; for 7 days) significantly reduces LPS (10 mg/kg)-increased PGE2 mRNA expression in heart tissue[1].
Neophytadiene significantly inhibits LPS (10 mg/kg)-induced NO production and inflammatory cytokines TNF-α, IL-6 and IL-10 and IL-10 in vivo[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Adult male Sprague Dawley rats (6-8 weeks)[1]
-
Dosage:12 mg/kg, 25 mg/kg, 50 mg/kg
-
Administration:Oral administration, daily, for 7 days
-
Result:Decreased haemoglobin (HGB) level, ALT level, and heart tissue TNF-α, IL1β, NF-κB, iNOS, PI3k/AktandMAPK in LPS (10 mg/kg)-treat rats.
Chemical Information
-
CAS No. 504-96-1
-
Appearance Liquid (Density: 0.8168 g/cm3)
-
Molecular Weight 278.52
-
Formula C20H38
-
Color Colorless to light yellow
-
SMILES
C=CC(CCCC(C)CCCC(C)CCCC(C)C)=C
-
Structure Classification
-
Initial Source
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, protect from light
* In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
Publications (1)
-
Journal Impact Factor
-
Most Recent
Solvent & Solubility
DMSO : 100 mg/mL (359.04 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (protect from light)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (protect from light). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 3.5904 mL | 17.9520 mL | 35.9041 mL | 89.7602 mL |
| 5 mM | 0.7181 mL | 3.5904 mL | 7.1808 mL | 17.9520 mL | |
| 10 mM | 0.3590 mL | 1.7952 mL | 3.5904 mL | 8.9760 mL | |
| 15 mM | 0.2394 mL | 1.1968 mL | 2.3936 mL | 5.9840 mL | |
| 20 mM | 0.1795 mL | 0.8976 mL | 1.7952 mL | 4.4880 mL | |
| 25 mM | 0.1436 mL | 0.7181 mL | 1.4362 mL | 3.5904 mL | |
| 30 mM | 0.1197 mL | 0.5984 mL | 1.1968 mL | 2.9920 mL | |
| 40 mM | 0.0898 mL | 0.4488 mL | 0.8976 mL | 2.2440 mL | |
| 50 mM | 0.0718 mL | 0.3590 mL | 0.7181 mL | 1.7952 mL | |
| 60 mM | 0.0598 mL | 0.2992 mL | 0.5984 mL | 1.4960 mL | |
| 80 mM | 0.0449 mL | 0.2244 mL | 0.4488 mL | 1.1220 mL | |
| 100 mM | 0.0359 mL | 0.1795 mL | 0.3590 mL | 0.8976 mL |