NAMPT inhibitor-linker 1
Based on 1 Customer Validation
NAMPT inhibitor-linker 1 is a agent-linker conjugates for ADC, composed of an NAMPT inhibitor as a payload, and a linker. ADC-3 consists of an NAMPT inhibitor-linker 1 and an anti-c-Kit monoclonal antibody, exihibits potent activity against c-Kit expressing cell lines such as GIST-T1 and NCI-H526 cells, with IC50s of <3 pM and 9 pM, respectively.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 99.27%
- CAS No.: 2241019-57-6
- 화학식: C36H37FN6O6
- 분자량:668.71
-
보관:
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
-
HY-13631E
DeruxtecanDrug-Linker Conjugates for ADC -
HY-128955
MC-VC-PABC-Aur0101Drug-Linker Conjugates for ADC -
HY-128904
MC-Val-Cit-PAB-duocarmycin chlorideDrug-Linker Conjugate for ADC -
HY-128908
MC-Val-Cit-PAB-IndibulinDrug-Linker Conjugates for ADC -
HY-128957
Vc-seco-DUBADrug-Linker Conjugate for ADC -
HY-101141
sulfo-SPDB-DM4Drug-Linker Conjugate for ADC -
HY-13631EG
Deruxtecan (GMP)Drug-Linker Conjugates for ADC -
HY-19812
Acetylene-linker-Val-Cit-PABC-MMAEDrug-Linker Conjugate for ADC -
HY-101982
Lys-SMCC-DM1Drug-Linker Conjugates for ADC -
HY-12460
SPDB-DM4ADC Linker -
HY-128902
MC-Val-Cit-PAB-vinblastineDrug-Linker Conjugate for ADC -
HY-128906
MC-Val-Cit-PAB-RetapamulinDrug-Linker Conjugates for ADC
All Drug-Linker Conjugates for ADC Isoforms
More
Biological Activity
제품 설명
IC50 & Target
|
Traditional Cytotoxic Agents |
In Vitro
In Vivo
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Female scid-beige (SCID bg) mice[1]
-
Dosage:20 mg/kg
-
Administration:A single intravenous injection (i.v.) for 28 days
-
Result:Significantly inhibited the growth of tumor in mice.
Chemical Information
-
CAS No. 2241019-57-6
-
Appearance Solid
-
분자량 668.71
-
화학식 C36H37FN6O6
-
Color White to light yellow
-
SMILES
FC1=CC(NC([C@@H]2[C@H](C2)C3=CN=CC=C3)=O)=CC=C1CNC(C4=CC=C(N5CCN(C(CCOCCN6C(C=CC6=O)=O)=O)CC5)C=C4)=O
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
-20°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
용액&용해도
In Vitro:
DMSO : 12.5 mg/mL (18.69 mM; ultrasonic and warming and heat to 60°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1.25 mg/mL (1.87 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1.25 mg/mL (1.87 mM); Clear solution
This protocol yields a clear solution of ≥ 1.25 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (12.5 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (269 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.4954 mL | 7.4771 mL | 14.9542 mL | 37.3854 mL |
| 5 mM | 0.2991 mL | 1.4954 mL | 2.9908 mL | 7.4771 mL | |
| 10 mM | 0.1495 mL | 0.7477 mL | 1.4954 mL | 3.7385 mL | |
| 15 mM | 0.0997 mL | 0.4985 mL | 0.9969 mL | 2.4924 mL |
NAMPT inhibitor-linker 1 Related Classifications
HY-112615 Related Classifications
Powered by Bioz