4A3-SC7
Based on 1 Customer Validation
4A3-SC7 is a polymer of 4A3 amine and is an ionizable lipid component. 4A3-SC7 can be used to prepare lipid nanoparticles (LNPs) to construct a selective organ targeting (SORT) LNP platform.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté: 98.55%
- CAS No.: 1857340-77-2
- Formule: C71H131N3O16S4
- Masse moléculaire:1411.07
-
Stockage:Pure form -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
Activité biologique
Chemical Information
-
CAS No. 1857340-77-2
-
Appearance Viscous liquid
-
Masse moléculaire 1411.07
-
Formule C71H131N3O16S4
-
Color yellow
-
SMILES
O=C(CCN(CCCN(CCCN(CCC(OCCOC(C(CSCCCCCCC)C)=O)=O)CCC(OCCOC(C(CSCCCCCCC)C)=O)=O)C)CCC(OCCOC(C(CSCCCCCCC)C)=O)=O)OCCOC(C(CSCCCCCCC)C)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
Pure form -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvant et solubilité
DMSO : 200 mg/mL (141.74 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Ethanol : 100 mg/mL (70.87 mM; Need ultrasonic)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% EtOH 90% Corn Oil
Solubility: ≥ 2.5 mg/mL (1.77 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Taking 1 mL working solution as an example, add 100 μL EtOH stock solution (25.0 mg/mL) to 900 μL Corn oil, and mix evenly.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (266 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| Ethanol / DMSO | 1 mM | 0.7087 mL | 3.5434 mL | 7.0868 mL | 17.7171 mL |
| 5 mM | 0.1417 mL | 0.7087 mL | 1.4174 mL | 3.5434 mL | |
| 10 mM | 0.0709 mL | 0.3543 mL | 0.7087 mL | 1.7717 mL | |
| 15 mM | 0.0472 mL | 0.2362 mL | 0.4725 mL | 1.1811 mL | |
| 20 mM | 0.0354 mL | 0.1772 mL | 0.3543 mL | 0.8859 mL | |
| 25 mM | 0.0283 mL | 0.1417 mL | 0.2835 mL | 0.7087 mL | |
| 30 mM | 0.0236 mL | 0.1181 mL | 0.2362 mL | 0.5906 mL | |
| 40 mM | 0.0177 mL | 0.0886 mL | 0.1772 mL | 0.4429 mL | |
| 50 mM | 0.0142 mL | 0.0709 mL | 0.1417 mL | 0.3543 mL | |
| 60 mM | 0.0118 mL | 0.0591 mL | 0.1181 mL | 0.2953 mL | |
| DMSO | 80 mM | 0.0089 mL | 0.0443 mL | 0.0886 mL | 0.2215 mL |
| 100 mM | 0.0071 mL | 0.0354 mL | 0.0709 mL | 0.1772 mL |
Powered by Bioz