E3 ligase Ligand 8
Based on 3 publication(s) in Google Scholar
E3 ligase Ligand 8 is a ligand for E3 ubiquitin ligase. E3 ligase Ligand 8 can be connected to the ligand for protein by a linker to form PROTACs. PROTACs are inducers of ubiquitination-mediated degradation of cancer-promoting proteins.
Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.
- Pureté : 99.32%
- CAS No.: 1225383-33-4
- Formule: C31H34N2O6
- Masse moléculaire:530.61
-
Stockage:
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Activité biologique
-
Chemical Information
-
Solvant et solubilité
- Pureté et documentation
- Références
-
Help & FAQs
-
HY-103597
Thalidomide-O-COOHCereblon Ligand -
HY-41547
Thalidomide 4-fluorideLigands for E3 Ligase -
HY-103596
Thalidomide-4-OHCereblon Ligand -
HY-42424
(S,R,S)-AHPC-Me hydrochlorideLigands for E3 Ligase -
HY-125845
(S,R,S)-AHPCVHL Ligand -
HY-101763A
(S,R,S)-AHPC monohydrochlorideVHL Ligand -
HY-101488
CC-885CRBN Modulator/GSPT1 Molecular Glue Degrader -
HY-112078
(S,R,S)-AHPC-MeLigands for E3 Ligase -
HY-111663
VL285VHL Ligand -
HY-128837
Nutlin carboxylic acidMDM2 Ligand -
HY-114406
TD-106CRBN Modulator -
HY-125905
VH032-cyclopropane-FLigand for E3 Ligase
Publications Citing Use of MedChemExpress (MCE) E3 ligase Ligand 8
More
Activité biologique
Description
IC50 & Target
|
IAP |
Chemical Information
-
CAS No. 1225383-33-4
-
Appearance Solid
-
Masse moléculaire 530.61
-
Formule C31H34N2O6
-
Color White to off-white
-
SMILES
CC(C)C[C@@H](C(O)=O)NC([C@@H](O)[C@H](NC(OCC1C2=C(C3=C1C=CC=C3)C=CC=C2)=O)CC4=CC=CC=C4)=O
-
Livraison
Room temperature in continental US; may vary elsewhere.
-
Stockage
4°C, stored under nitrogen
* In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Stem Cell Rev Rep
Mechanism of Adipose-Derived Mesenchymal Stem Cell-Derived Extracellular Vesicles Carrying miR-21-5p in Hyperoxia-Induced Lung Injury. [Abstract]2022 Mar;18(3):1007-1024. PMID: 34882302 -
Mol Cell Endocrinol
Angiotensin II-induced calcium overload affects mitochondrial functions in cardiac hypertrophy by targeting the USP2/MFN2 axis. [Abstract]2023 Jul 1:571:111938. PMID: 37100191 -
Genes Genomics
NEDD4L suppresses PD-L1 expression and enhances anti-tumor immune response in A549 cells. [Abstract]2022 Sep;44(9):1071-1079. PMID: 35353342
Solvant et solubilité
In Vitro:
DMSO : 100 mg/mL (188.46 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.71 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (stored under nitrogen)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation
-
Fiche technique (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instruction de manipulation (2659 KB)
Références
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (stored under nitrogen). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.8846 mL | 9.4231 mL | 18.8462 mL | 47.1156 mL |
| 5 mM | 0.3769 mL | 1.8846 mL | 3.7692 mL | 9.4231 mL | |
| 10 mM | 0.1885 mL | 0.9423 mL | 1.8846 mL | 4.7116 mL | |
| 15 mM | 0.1256 mL | 0.6282 mL | 1.2564 mL | 3.1410 mL | |
| 20 mM | 0.0942 mL | 0.4712 mL | 0.9423 mL | 2.3558 mL | |
| 25 mM | 0.0754 mL | 0.3769 mL | 0.7538 mL | 1.8846 mL | |
| 30 mM | 0.0628 mL | 0.3141 mL | 0.6282 mL | 1.5705 mL | |
| 40 mM | 0.0471 mL | 0.2356 mL | 0.4712 mL | 1.1779 mL | |
| 50 mM | 0.0377 mL | 0.1885 mL | 0.3769 mL | 0.9423 mL | |
| 60 mM | 0.0314 mL | 0.1571 mL | 0.3141 mL | 0.7853 mL | |
| 80 mM | 0.0236 mL | 0.1178 mL | 0.2356 mL | 0.5889 mL | |
| 100 mM | 0.0188 mL | 0.0942 mL | 0.1885 mL | 0.4712 mL |
E3 ligase Ligand 8 Related Classifications
HY-43961 Related Classifications
Powered by Bioz