(1-Nitroethene-1,2-diyl)dibenzene
Based on 1 Customer Validation
(1-Nitroethene-1,2-diyl)dibenzene (alpha-Nitrostilbene; α-Nitrostilbene) is an inhibitor of protein arginine methyltransferase 1 (PRMT1; IC50=11 μM in histone H4 methylation assay). It also inhibits histone H4 methylation by PRMT8, but not histone H3.1 methylation by CARM1 or Set7/9, at concentrations of 10 and 100 μM.
For research use only. We do not sell to patients.
- Purity: 99.05%
- CAS No.: 1215-07-2
- Formula: C14H11NO2
- Molecular Weight:225.24
-
Storage:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
All Histone Methyltransferase Isoforms
More
Biological Activity
Chemical Information
-
CAS No. 1215-07-2
-
Appearance Solid
-
Molecular Weight 225.24
-
Formula C14H11NO2
-
Color Light yellow to yellow
-
SMILES
O=[N+](/C(C1=CC=CC=C1)=C/C2=CC=CC=C2)[O-]
-
Synonyms
alpha-Nitrostilbene; α-Nitrostilbene; NSC 385
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (443.97 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (11.10 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (11.10 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 2.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (275 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 4.4397 mL | 22.1985 mL | 44.3971 mL | 110.9927 mL |
| 5 mM | 0.8879 mL | 4.4397 mL | 8.8794 mL | 22.1985 mL | |
| 10 mM | 0.4440 mL | 2.2199 mL | 4.4397 mL | 11.0993 mL | |
| 15 mM | 0.2960 mL | 1.4799 mL | 2.9598 mL | 7.3995 mL | |
| 20 mM | 0.2220 mL | 1.1099 mL | 2.2199 mL | 5.5496 mL | |
| 25 mM | 0.1776 mL | 0.8879 mL | 1.7759 mL | 4.4397 mL | |
| 30 mM | 0.1480 mL | 0.7400 mL | 1.4799 mL | 3.6998 mL | |
| 40 mM | 0.1110 mL | 0.5550 mL | 1.1099 mL | 2.7748 mL | |
| 50 mM | 0.0888 mL | 0.4440 mL | 0.8879 mL | 2.2199 mL | |
| 60 mM | 0.0740 mL | 0.3700 mL | 0.7400 mL | 1.8499 mL | |
| 80 mM | 0.0555 mL | 0.2775 mL | 0.5550 mL | 1.3874 mL | |
| 100 mM | 0.0444 mL | 0.2220 mL | 0.4440 mL | 1.1099 mL |
(1-Nitroethene-1,2-diyl)dibenzene Related Classifications
HY-W013500 Related Classifications
Powered by Bioz