CamA-IN-1
Based on 1 Customer Validation
CamA-IN-1 is a Clostridioides difficile-specific DNA adenine methyltransferase (CamA) inhibitor. CamA-IN-1 has inhibitory for CamA with IC50 and Kd values of 0.4 μM and 0.2 μM, respectively. CamA-IN-1 can be used for the research of Clostridioides difficile infections (CDI).
For research use only. We do not sell to patients.
- Purity: 99.03%
- CAS No.: 2924055-46-7
- Formula: C23H36N6O6
- Molecular Weight:492.57
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Biological Activity
CamA-IN-1 (compound 39) has inhibitory for CamA with IC50 and Kd values of 0.4 μM and 0.2 μM, respectively[1].
CamA-IN-1 is selective for CamA over closely related bacterial and mammalian DNA and RNA MTases, protein lysine and arginine MTases, and human adenosine receptors[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 2924055-46-7
-
Appearance Solid
-
Molecular Weight 492.57
-
Formula C23H36N6O6
-
Color White to off-white
-
SMILES
O=C(N1CCC(CCCNC2=C3N=CN([C@@H]4O[C@H](CO)[C@@H](O)[C@H]4O)C3=NC=N2)CC1)OC(C)(C)C
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvent & Solubility
DMSO : 100 mg/mL (203.02 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 2.5 mg/mL (5.08 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 2.5 mg/mL (5.08 mM); Clear solution; Need ultrasonic
This protocol yields a clear solution of 2.5 mg/mL.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (284 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.0302 mL | 10.1508 mL | 20.3017 mL | 50.7542 mL |
| 5 mM | 0.4060 mL | 2.0302 mL | 4.0603 mL | 10.1508 mL | |
| 10 mM | 0.2030 mL | 1.0151 mL | 2.0302 mL | 5.0754 mL | |
| 15 mM | 0.1353 mL | 0.6767 mL | 1.3534 mL | 3.3836 mL | |
| 20 mM | 0.1015 mL | 0.5075 mL | 1.0151 mL | 2.5377 mL | |
| 25 mM | 0.0812 mL | 0.4060 mL | 0.8121 mL | 2.0302 mL | |
| 30 mM | 0.0677 mL | 0.3384 mL | 0.6767 mL | 1.6918 mL | |
| 40 mM | 0.0508 mL | 0.2538 mL | 0.5075 mL | 1.2689 mL | |
| 50 mM | 0.0406 mL | 0.2030 mL | 0.4060 mL | 1.0151 mL | |
| 60 mM | 0.0338 mL | 0.1692 mL | 0.3384 mL | 0.8459 mL | |
| 80 mM | 0.0254 mL | 0.1269 mL | 0.2538 mL | 0.6344 mL | |
| 100 mM | 0.0203 mL | 0.1015 mL | 0.2030 mL | 0.5075 mL |
Powered by Bioz