HFI-437
Based on 1 Customer Validation
HFI-437 is a potent non-peptidic insulin-regulated aminopeptidase (IRAP) inhibitor with a Ki of 20 nM. HFI-437 is a cognitive enhancer.
Nur für Forschungszwecke. Wir verkaufen nicht an Patienten.
- Reinheit: 99.64%
- CAS. Nr.: 1110650-74-2
- Formel: C23H20N2O5
- Molecular Weight:404.42
-
Speicherung:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biologische Aktivität
-
Chemical Information
-
Lösungsmittel & Löslichkeit
- Reinheit & Dokumentation
- Verweise
-
Help & FAQs
-
HY-110259
HFI-142
-
HY-151518
Aminopeptidase-IN-1
-
HY-B0134
Bestatin
-
HY-15695
Puromycin aminonucleoside
-
HY-B0134A
Bestatin hydrochloride
-
HY-B0134R
Bestatin (Standard)
-
HY-137298
LYS006
-
HY-103226
SC-57461A
-
HY-109058
Firibastat
-
HY-10825
DG051
-
HY-N8760
Batatasin IV
-
HY-15695R
Puromycin aminonucleoside (Standard)
Biologische Aktivität
Ki: 20 nM (IRAP)[1]
Chemical Information
-
CAS. Nr. 1110650-74-2
-
Appearance Solid
-
Molecular Weight 404.42
-
Formel C23H20N2O5
-
Color Off-white to light yellow
-
SMILES
O=C(C1=C(NC(C)=O)OC2=CC(O)=CC=C2C1C3=CN=C4C=CC=CC4=C3)OCC
-
Versand
Room temperature in continental US; may vary elsewhere.
-
Speicherung
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Lösungsmittel & Löslichkeit
DMSO : 100 mg/mL (247.27 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Konzentration (Stammlösung) × Volumen (Stammlösung) = Konzentration (Ziellösung) × Volumen (Ziellösung)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Reinheit & Dokumentation
-
Data Sheet (276 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
Verweise
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.4727 mL | 12.3634 mL | 24.7268 mL | 61.8169 mL |
| 5 mM | 0.4945 mL | 2.4727 mL | 4.9454 mL | 12.3634 mL | |
| 10 mM | 0.2473 mL | 1.2363 mL | 2.4727 mL | 6.1817 mL | |
| 15 mM | 0.1648 mL | 0.8242 mL | 1.6485 mL | 4.1211 mL | |
| 20 mM | 0.1236 mL | 0.6182 mL | 1.2363 mL | 3.0908 mL | |
| 25 mM | 0.0989 mL | 0.4945 mL | 0.9891 mL | 2.4727 mL | |
| 30 mM | 0.0824 mL | 0.4121 mL | 0.8242 mL | 2.0606 mL | |
| 40 mM | 0.0618 mL | 0.3091 mL | 0.6182 mL | 1.5454 mL | |
| 50 mM | 0.0495 mL | 0.2473 mL | 0.4945 mL | 1.2363 mL | |
| 60 mM | 0.0412 mL | 0.2061 mL | 0.4121 mL | 1.0303 mL | |
| 80 mM | 0.0309 mL | 0.1545 mL | 0.3091 mL | 0.7727 mL | |
| 100 mM | 0.0247 mL | 0.1236 mL | 0.2473 mL | 0.6182 mL |
HFI-437 Related Classifications
HY-160239 Related Classifications
Powered by Bioz