1. PROTAC Autophagy Apoptosis
  2. E3 Ligase Ligand-Linker Conjugates Autophagy Apoptosis
  3. Thalidomide-O-amido-C3-NH2 TFA

Thalidomide-O-amido-C3-NH2 TFA  (Synonyms: Cereblon Ligand-Linker Conjugates 16 TFA; E3 Ligase Ligand-Linker Conjugates 52 TFA)

Cat. No.: HY-115560A Pureté: 99.58%
Instruction de manipulation Technical Support

Thalidomide-O-amido-C3-NH2 TFA is a synthesized E3 ligase ligand-linker conjugate that incorporates the Thalidomide based cereblon ligand and a linker used in PROTAC technology.

Nos produits utilisent uniquement pour la recherche. Nous ne vendons pas aux patients.

Thalidomide-O-amido-C3-NH2 TFA

Thalidomide-O-amido-C3-NH2 TFA Chemical Structure

CAS No. : 2022182-58-5

Size Prix Stock Quantité
50 mg En stock
100 mg En stock
200 mg   Obtenir un devis  
500 mg   Obtenir un devis  

* Veuillez sélectionner la quantité avant d'ajouter des articles.

This product is a controlled substance and not for sale in your territory.

Avis client

Based on 1 Customer Validation

Other Forms of Thalidomide-O-amido-C3-NH2 TFA:

Top Publications Citing Use of Products

Voir tous les produits spécifiques à Isoform E3 Ligase Ligand-Linker Conjugates:

  • Activité biologique

  • Pureté et documentation

  • Références

  • Avis client

Description

Thalidomide-O-amido-C3-NH2 TFA is a synthesized E3 ligase ligand-linker conjugate that incorporates the Thalidomide based cereblon ligand and a linker used in PROTAC technology.

IC50 & Target

Cereblon

 

Masse moléculaire

502.40

Formule

C20H21F3N4O8

CAS No.
Appearance

Solid

Color

White to off-white

SMILES

O=C(NCCCN)COC1=CC=CC(C(N2C(CC3)C(NC3=O)=O)=O)=C1C2=O.OC(C(F)(F)F)=O

Livraison

Room temperature in continental US; may vary elsewhere.

Stockage

4°C, sealed storage, away from moisture

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

Solvant et solubilité
In Vitro: 

DMSO : 125 mg/mL (248.81 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)

Preparing
Stock Solutions
Concentration Solvent Mass 1 mg 5 mg 10 mg
1 mM 1.9904 mL 9.9522 mL 19.9045 mL
5 mM 0.3981 mL 1.9904 mL 3.9809 mL
View the Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

  • Calculateur de molarité

  • Calculateur de dilution

Mass (g) = Concentration (mol/L) × Volume (L) × Molecular Weight (g/mol)

Mass
=
Concentration
×
Volume
×
Molecular Weight *

Concentration (start) × Volume (start) = Concentration (final) × Volume (final)

This equation is commonly abbreviated as: C1V1 = C2V2

Concentration (start)

C1

×
Volume (start)

V1

=
Concentration (final)

C2

×
Volume (final)

V2

In Vivo:

Select the appropriate dissolution method based on your experimental animal and administration route.

For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.

  • Protocol 1

    Add each solvent one by one:  10% DMSO    40% PEG300    5% Tween-80    45% Saline

    Solubility: ≥ 2.08 mg/mL (4.14 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.

    Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
  • Protocol 2

    Add each solvent one by one:  10% DMSO    90% (20% SBE-β-CD in Saline)

    Solubility: ≥ 2.08 mg/mL (4.14 mM); Clear solution

    This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).

    Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.

    Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:

Dosage

mg/kg

Animal weight
(per animal)

g

Dosing volume
(per animal)

μL

Number of animals

Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO +
+
%
Tween-80 +
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration: mg/mL
Method for preparing stock solution: mg drug dissolved in μL  DMSO (Stock solution concentration: mg/mL).

*In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)

The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take μL DMSO stock solution, add μL . μL , mix evenly, next add μL Tween 80, mix evenly, then add μL Saline.
 If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureté et documentation

Purity: 99.58%

Références

Complete Stock Solution Preparation Table

* Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.

Optional Solvent Concentration Solvent Mass 1 mg 5 mg 10 mg 25 mg
DMSO 1 mM 1.9904 mL 9.9522 mL 19.9045 mL 49.7611 mL
5 mM 0.3981 mL 1.9904 mL 3.9809 mL 9.9522 mL
10 mM 0.1990 mL 0.9952 mL 1.9904 mL 4.9761 mL
15 mM 0.1327 mL 0.6635 mL 1.3270 mL 3.3174 mL
20 mM 0.0995 mL 0.4976 mL 0.9952 mL 2.4881 mL
25 mM 0.0796 mL 0.3981 mL 0.7962 mL 1.9904 mL
30 mM 0.0663 mL 0.3317 mL 0.6635 mL 1.6587 mL
40 mM 0.0498 mL 0.2488 mL 0.4976 mL 1.2440 mL
50 mM 0.0398 mL 0.1990 mL 0.3981 mL 0.9952 mL
60 mM 0.0332 mL 0.1659 mL 0.3317 mL 0.8294 mL
80 mM 0.0249 mL 0.1244 mL 0.2488 mL 0.6220 mL
100 mM 0.0199 mL 0.0995 mL 0.1990 mL 0.4976 mL
  • No file chosen (Maximum size is: 1024 Kb)
  • If you have published this work, please enter the PubMed ID.
  • Your name will appear on the site.
Help & FAQs
  • Do most proteins show cross-species activity?

    Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.

Vos produits récemment consultés:

Demande en ligne

Your information is safe with us. * Required Fields.

Nom du produit

 

Requested Quantity *

Nom du demandeur *

 

Civilité

Adresse e-mail *

 

Numéro de téléphone *

Department

 

Nom de l'organisation *

City

État

Country or Region *

     

Remarques

Bulk Inquiry

Inquiry Information

Nom du produit:
Thalidomide-O-amido-C3-NH2 TFA
Cat. No.:
HY-115560A
Quantité:
MCE Japan Authorized Agent: