Hydroxy vardenafil
Based on 1 Customer Validation
Hydroxy vardenafil is a Vardenafil (HY-B0442) analog, which is found in herbal dietary supplement.
Para uso exclusivo en investigación. No vendemos a pacientes.
- Pureza: 99.72%
- No. CAS: 224785-98-2
- Fòrmula: C23H32N6O5S
- Peso molecular:504.60
-
Almacenamiento:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
Actividad biológica
Chemical Information
-
No. CAS 224785-98-2
-
Appearance Solid
-
Peso molecular 504.60
-
Fòrmula C23H32N6O5S
-
Color White to off-white
-
SMILES
CCOC(C=C1)=C(C(NN(C(CCC)=N2)C3=C2C)=NC3=O)C=C1[S](=O)(N(CC4)CCN4CCO)=O
-
Envío
Room temperature in continental US; may vary elsewhere.
-
Almacenamiento
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Solvente y solubilidad
DMSO : 100 mg/mL (198.18 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (4.95 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (4.95 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Pureza y Documentación
-
Ficha de datos (271 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Instrucciones de manejo (2659 KB)
Referencias
[1]. Jankovics P, et al. Detection and structure elucidation of hydroxythiovardenafil as an adulterant in a herbal dietary supplement. J Pharm Biomed Anal. 2013 Feb 23;74:83-91. [Content Brief]
[2]. Heo D, et al. Metabolic study of vardenafil analogues: Pseudovardenafil and hydroxyvardenafil. J Chromatogr B Analyt Technol Biomed Life Sci. 2020 Feb 15;1139:121940. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.9818 mL | 9.9088 mL | 19.8177 mL | 49.5442 mL |
| 5 mM | 0.3964 mL | 1.9818 mL | 3.9635 mL | 9.9088 mL | |
| 10 mM | 0.1982 mL | 0.9909 mL | 1.9818 mL | 4.9544 mL | |
| 15 mM | 0.1321 mL | 0.6606 mL | 1.3212 mL | 3.3029 mL | |
| 20 mM | 0.0991 mL | 0.4954 mL | 0.9909 mL | 2.4772 mL | |
| 25 mM | 0.0793 mL | 0.3964 mL | 0.7927 mL | 1.9818 mL | |
| 30 mM | 0.0661 mL | 0.3303 mL | 0.6606 mL | 1.6515 mL | |
| 40 mM | 0.0495 mL | 0.2477 mL | 0.4954 mL | 1.2386 mL | |
| 50 mM | 0.0396 mL | 0.1982 mL | 0.3964 mL | 0.9909 mL | |
| 60 mM | 0.0330 mL | 0.1651 mL | 0.3303 mL | 0.8257 mL | |
| 80 mM | 0.0248 mL | 0.1239 mL | 0.2477 mL | 0.6193 mL | |
| 100 mM | 0.0198 mL | 0.0991 mL | 0.1982 mL | 0.4954 mL |