JQKD82 trihydrochloride
Based on 1 Customer Validation
JQKD82 (JADA82) trihydrochloride is a cell-permeable and selective KDM5 inhibitor. JQKD82 trihydrochloride increases H3K4me3 and can be used for the research of multiple myeloma.
For research use only. We do not sell to patients.
- Purity: 99.89%
- CAS No.: 2863676-87-1
- Formula: C27H43Cl3N4O5
- Molecular Weight:610.01
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
-
Bioactive Compound Library Max
HY-L181
-
Bioactive Compound Library
HY-L001
-
Methylation Compound Library
HY-L203
-
High-Throughput Bioactive Compound Library
HY-L205
-
Posttranslational Modification Library
HY-L226
-
Epigenetics Compound Library
HY-L005
-
Histone Modification Research Compound Library
HY-L024
-
Anti-Cancer Compound Library
HY-L025
-
Anti-Blood Cancer Compound Library
HY-L079
-
Anti-Cancer Metabolism Compound Library
HY-L083
-
Heterocyclic Compound Library
HY-L138
-
Highly Selective Inhibitors Library
HY-L158
-
Anti-Hematopathy Compound Library
HY-L171
-
MCE Bioactive Compound Library
HY-L001V
Biological Activity
|
KDM5 |
JQKD82 (0.3 μM; 24 hours) trihydrochloride causes an increase in the global H3K4me3 level of MM.1S cells[1].
JQKD82 (0.1-10 μM; day 1-day 5) trihydrochloride inhibits the growth of MM.1S cells in a dose- and time-dependent manner. JQKD82 trihydrochloride is potent at eliciting growth suppression in MM.1S cells (IC50=0.42 μM)[1].
JQKD82 (1 μM; 24 hours) trihydrochloride induces G1 cell-cycle arrest by 48 hours in MM.1S and MOLP-8 cells[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
JQKD82 trihydrochloride displays an increase in H3K4me3 levels and results in a dramatic reduction of MYC immuno-staining in vivo[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:Six-week-old female NOD.Cg-Prkdcscid Il2rgtm1Wjl/SzJ (NSG) mice (bearing MOLP-8 TurboGFP-Luc cells)[1]
-
Dosage:50 mg/kg, 75 mg/kg
-
Administration:i.p.; twice a day for 3 weeks
-
Result:Significantly reduced tumor burden.
Chemical Information
-
CAS No. 2863676-87-1
-
Appearance Solid
-
Molecular Weight 610.01
-
Formula C27H43Cl3N4O5
-
Color White to light yellow
-
SMILES
O=C(C1=CC(CNCC(N(CCN(C)C)CC)=O)=NC=C1)OC2=CC=C(C=C2OC(C)C)OC(C)C.[H]Cl.[H]Cl.[H]Cl
-
Synonyms
JADA82 trihydrochloride; PCK82 trihydrochloride
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Solvent & Solubility
DMSO : 50 mg/mL (81.97 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 1 mg/mL (1.64 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 1 mg/mL (1.64 mM); Clear solution
This protocol yields a clear solution of ≥ 1 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (10.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL. * In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (269 KB)
-
SDS (252 KB)
- English - EN (252 KB)
- Français - FR (252 KB)
- Deutsch - DE (252 KB)
- Norwegian - NO (252 KB)
- Español - ES (252 KB)
- Swedish - SV (252 KB)
- Italian - IT (252 KB)
- Korean - KR (252 KB)
- Portuguese - PT (252 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 1.6393 mL | 8.1966 mL | 16.3932 mL | 40.9829 mL |
| 5 mM | 0.3279 mL | 1.6393 mL | 3.2786 mL | 8.1966 mL | |
| 10 mM | 0.1639 mL | 0.8197 mL | 1.6393 mL | 4.0983 mL | |
| 15 mM | 0.1093 mL | 0.5464 mL | 1.0929 mL | 2.7322 mL | |
| 20 mM | 0.0820 mL | 0.4098 mL | 0.8197 mL | 2.0491 mL | |
| 25 mM | 0.0656 mL | 0.3279 mL | 0.6557 mL | 1.6393 mL | |
| 30 mM | 0.0546 mL | 0.2732 mL | 0.5464 mL | 1.3661 mL | |
| 40 mM | 0.0410 mL | 0.2049 mL | 0.4098 mL | 1.0246 mL | |
| 50 mM | 0.0328 mL | 0.1639 mL | 0.3279 mL | 0.8197 mL | |
| 60 mM | 0.0273 mL | 0.1366 mL | 0.2732 mL | 0.6830 mL | |
| 80 mM | 0.0205 mL | 0.1025 mL | 0.2049 mL | 0.5123 mL |
JQKD82 trihydrochloride Related Classifications
HY-138691A Related Classifications
Powered by Bioz