Asp-AMS
Based on 1 Customer Validation
Asp-AMS, an analogue of aspartyl-adenylate, is an aspartyl-tRNA synthetase inhibitor and also a strong competitive inhibitor of the mitochondrial enzyme.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity: 98.14%
- CAS No.: 828288-98-8
- 화학식: C14H19N7O9S
- 분자량:461.41
-
보관:Powder -20°C, 3 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- 순도&문서
- References
-
Help & FAQs
Biological Activity
제품 설명
IC50 & Target
Aspartyl-tRNA synthetase, Mitochondrial enzyme [1].
Cellular Effect
|
Cell Line
|
Type | Value | Description | References |
|---|---|---|---|---|
| PBMC | IC50 |
2.4 μM
Compound: AspSA
|
Immunosuppressive activity against human PBMC assessed as inhibition of allogenic mixed lymphocyte reaction
Immunosuppressive activity against human PBMC assessed as inhibition of allogenic mixed lymphocyte reaction
|
[PMID: 18438987] |
In Vitro
Asp-AMS is a 500-fold stronger competitive inhibitor of the mitochondrial enzyme than aspartol-AMP (10 nM) and a 35-fold lower competitor of human and bovine cyt-AspRSs (300 nM). Asp-AMS is a strong inhibitor with Ki in the nanomolar (nM) range. Asp-AMS has also the highest inhibitory effect for the mitochondrial enzyme. Asp-AMS is the most active inhibitor with Ki values in the nanomolar range, with a stronger effect on bacterial AspRSs (E. coli and P. aeruginosa) than on human cytosolic AspRS[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 828288-98-8
-
Appearance Solid
-
분자량 461.41
-
화학식 C14H19N7O9S
-
Color White to off-white
-
SMILES
NC1=C2N=CN([C@@H]([C@H](O)[C@@H]3O)O[C@@H]3COS(=O)(NC([C@@H](N)CC(O)=O)=O)=O)C2=NC=N1
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years In solvent -80°C 6 months -20°C 1 month
용액&용해도
In Vitro:
DMSO : 100 mg/mL (216.73 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (5.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.42 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
순도&문서
-
Data Sheet (274 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1673 mL | 10.8363 mL | 21.6727 mL | 54.1817 mL |
| 5 mM | 0.4335 mL | 2.1673 mL | 4.3345 mL | 10.8363 mL | |
| 10 mM | 0.2167 mL | 1.0836 mL | 2.1673 mL | 5.4182 mL | |
| 15 mM | 0.1445 mL | 0.7224 mL | 1.4448 mL | 3.6121 mL | |
| 20 mM | 0.1084 mL | 0.5418 mL | 1.0836 mL | 2.7091 mL | |
| 25 mM | 0.0867 mL | 0.4335 mL | 0.8669 mL | 2.1673 mL | |
| 30 mM | 0.0722 mL | 0.3612 mL | 0.7224 mL | 1.8061 mL | |
| 40 mM | 0.0542 mL | 0.2709 mL | 0.5418 mL | 1.3545 mL | |
| 50 mM | 0.0433 mL | 0.2167 mL | 0.4335 mL | 1.0836 mL | |
| 60 mM | 0.0361 mL | 0.1806 mL | 0.3612 mL | 0.9030 mL | |
| 80 mM | 0.0271 mL | 0.1355 mL | 0.2709 mL | 0.6773 mL | |
| 100 mM | 0.0217 mL | 0.1084 mL | 0.2167 mL | 0.5418 mL |
Asp-AMS Related Classifications
HY-112860 Related Classifications
Powered by Bioz