Ximelagatran
Based on 1 publication(s) in Google Scholar
Ximelagatran (H 376/95) is an orally active thrombin inhibitor that selectively and competitively inhibits both free and clot-bound thrombin. Ximelagatran is an anticoagulant agent with a rapid onset of anticoagulant effect, predictable, dose-dependent pharmcokinetics and pharmacodynamics.
For research use only. We do not sell to patients.
- Purity: 98.43%
- CAS No.: 192939-46-1
- Formula: C24H35N5O5
- Molecular Weight:473.57
-
Storage:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 2 years , -20°C, 1 year
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
Solvent & Solubility
- Purity & Documentation
- References
-
Help & FAQs
Publications Citing Use of MedChemExpress (MCE) Ximelagatran
More
Biological Activity
Ximelagatran is an orally administered direct thrombin inhibitor under development as an anticoagulant agent for prophylaxis against and treatment of thromboembolism. Ximelagatran is rapidly absorbed and quickly converted into its active form Melagatran, a reversible, active-site inhibitor of both free and clot-bound thrombin that has stable and reproducible pharmacokinetic properties. Initial studies have shown Ximelagatran to have good efficacy and safety in the prevention of venous thromboembolism after total knee or total hip replacement[3].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 192939-46-1
-
Appearance Solid
-
Molecular Weight 473.57
-
Formula C24H35N5O5
-
Color White to off-white
-
SMILES
O=C([C@@H]1CCN1C([C@@H](C2CCCCC2)NCC(OCC)=O)=O)NCC3=CC=C(C=C3)/C(N)=N/O
-
Synonyms
H 376/95
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
Powder -20°C 3 years 4°C 2 years In solvent -80°C 2 years -20°C 1 year
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Biotechnol Bioeng
An integrated biomimetic array chip for establishment of collagen-based 3D primary human hepatocyte model for prediction of clinical drug-induced liver injury. [Abstract]2021 Dec;118(12):4687-4698. PMID: 34478150
Solvent & Solubility
DMSO : 250 mg/mL (527.91 mM; Need ultrasonic; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.08 mg/mL (4.39 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.08 mg/mL (4.39 mM); Clear solution
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (20.8 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Purity & Documentation
-
Data Sheet (273 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Colwell CW Jr, et al. Comparison of ximelagatran, an oral direct thrombin inhibitor, with enoxaparin for the prevention of venous thromboembolism following total hip replacement. A randomized, double-blind study. J Thromb Haemost. 2003 Oct;1(10):2119-30. [Content Brief]
[2]. Gao JH, et al. Effects of different anticoagulant drugs on the prevention of complications in patients after arthroplasty: A network meta-analysis. Medicine (Baltimore). 2017 Oct;96(40):e8059. [Content Brief]
[3]. Francis CW, et al. Comparison of ximelagatran with warfarin for the prevention of venous thromboembolism after total knee replacement. N Engl J Med. 2003 Oct 30;349(18):1703-12. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1116 mL | 10.5581 mL | 21.1162 mL | 52.7905 mL |
| 5 mM | 0.4223 mL | 2.1116 mL | 4.2232 mL | 10.5581 mL | |
| 10 mM | 0.2112 mL | 1.0558 mL | 2.1116 mL | 5.2791 mL | |
| 15 mM | 0.1408 mL | 0.7039 mL | 1.4077 mL | 3.5194 mL | |
| 20 mM | 0.1056 mL | 0.5279 mL | 1.0558 mL | 2.6395 mL | |
| 25 mM | 0.0845 mL | 0.4223 mL | 0.8446 mL | 2.1116 mL | |
| 30 mM | 0.0704 mL | 0.3519 mL | 0.7039 mL | 1.7597 mL | |
| 40 mM | 0.0528 mL | 0.2640 mL | 0.5279 mL | 1.3198 mL | |
| 50 mM | 0.0422 mL | 0.2112 mL | 0.4223 mL | 1.0558 mL | |
| 60 mM | 0.0352 mL | 0.1760 mL | 0.3519 mL | 0.8798 mL | |
| 80 mM | 0.0264 mL | 0.1320 mL | 0.2640 mL | 0.6599 mL | |
| 100 mM | 0.0211 mL | 0.1056 mL | 0.2112 mL | 0.5279 mL |
Ximelagatran Related Classifications
HY-10787 Related Classifications
Powered by Bioz