Decloxizine dihydrochloride
Based on 1 publication(s) in Google Scholar
Decloxizine (UCB-1402; NSC289116) dihydrochloride is an orally active bronchodilator that can penetrate the blood-brain barrier. Decloxizine dihydrochloride is a piperazine-type H1 histamine receptor antagonist. Decloxizine dihydrochloride selectively blocks H1 histamine receptors, inhibiting histamine-induced capillary dilation, edema, and itching. Decloxizine dihydrochloride has some 5-HT2 receptor antagonistic activity. Decloxizine dihydrochloride can be used in studies of urticaria, allergic rhinitis, and bronchial asthma.
For research use only. We do not sell to patients.
- Purity: 99.69%
- CAS No.: 13073-96-6
- Formula: C21H30Cl2N2O2
- Molecular Weight:413.38
-
Storage:
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications Citing Use of MedChemExpress (MCE) Decloxizine dihydrochloride
MoreAll Histamine Receptor Isoforms
MoreAll 5-HT Receptor Isoforms
More
Biological Activity
|
H1 Receptor |
Decloxizine dihydrochloride has an inhibitory effect on bronchial contraction induced by histamine aerosol in conscious guinea pigs[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Chemical Information
-
CAS No. 13073-96-6
-
Appearance Solid
-
Molecular Weight 413.38
-
Formula C21H30Cl2N2O2
-
Color White to off-white
-
SMILES
OCCOCCN1CCN(C(C2=CC=CC=C2)C3=CC=CC=C3)CC1.[H]Cl.[H]Cl
-
Synonyms
UCB 1402 dihydrochloride; NSC289116 dihydrochloride
-
Shipping
Room temperature in continental US; may vary elsewhere.
-
Storage
4°C, sealed storage, away from moisture
* In solvent : -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture)
Publications (1)
-
Journal Impact Factor
-
Most Recent
-
Sci Data
High-throughput drug screening identifies novel therapeutics for Low Grade Serous Ovarian Carcinoma. [Abstract]2024 Sep 19;11(1):1024. PMID: 39300112
Solvent & Solubility
H2O : ≥ 100 mg/mL (241.91 mM)
DMSO : ≥ 50 mg/mL (120.95 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
* "≥" means soluble, but saturation unknown.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: ≥ 2.5 mg/mL (6.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (6.05 mM); Clear solution
This protocol yields a clear solution of ≥ 2.5 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (25.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
For the following dissolution methods, please prepare the working solution directly:
It is recommended to prepare fresh solutions and use them promptly within a short period of time.
The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: PBS
Solubility: 100 mg/mL (241.91 mM); Clear solution; Need ultrasonic
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Working solution concentration: 0.22 mg/mL
This product has good water solubility, please refer to the measured solubility data in water/PBS/Saline for details.
Purity & Documentation
-
Data Sheet (274 KB)
-
SDS (393 KB)
- English - EN (393 KB)
- Français - FR (393 KB)
- Deutsch - DE (393 KB)
- Norwegian - NO (393 KB)
- Español - ES (393 KB)
- Swedish - SV (393 KB)
- Italian - IT (393 KB)
- Korean - KR (393 KB)
- Portuguese - PT (393 KB)
-
Handling Instructions (2659 KB)
References
[1]. Daly MJ, Lightowler JE. Effect of decloxizine on histamine aerosol induced bronchoconstriction in the conscious guinea-pig. Arch Int Pharmacodyn Ther. 1969 Nov;182(1):215-8. [Content Brief]
[2]. Kiehelä J, et al. Clinical investigation of a new broncholyticum--decloxizine--as compared with franol and placebo treatment. Respiration. 1970;27(6):582-90. [Content Brief]
[3]. Scarpa GL. Effets de la décloxizine sur la symptomatologie clinique, la fonction respiratorie et la réaction cutanée à la sérotonine de sujets asthmatiques [Effects of decloxizine on clinical symptomatology, respiratory function and cutaneous reaction to serotonin in asthmatic patients]. Acta Tuberc Pneumol Belg. 1968 Jul-Oct;59(4):583-90. French. [Content Brief]
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture). When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO / H2O | 1 mM | 2.4191 mL | 12.0954 mL | 24.1908 mL | 60.4770 mL |
| 5 mM | 0.4838 mL | 2.4191 mL | 4.8382 mL | 12.0954 mL | |
| 10 mM | 0.2419 mL | 1.2095 mL | 2.4191 mL | 6.0477 mL | |
| 15 mM | 0.1613 mL | 0.8064 mL | 1.6127 mL | 4.0318 mL | |
| 20 mM | 0.1210 mL | 0.6048 mL | 1.2095 mL | 3.0239 mL | |
| 25 mM | 0.0968 mL | 0.4838 mL | 0.9676 mL | 2.4191 mL | |
| 30 mM | 0.0806 mL | 0.4032 mL | 0.8064 mL | 2.0159 mL | |
| 40 mM | 0.0605 mL | 0.3024 mL | 0.6048 mL | 1.5119 mL | |
| 50 mM | 0.0484 mL | 0.2419 mL | 0.4838 mL | 1.2095 mL | |
| 60 mM | 0.0403 mL | 0.2016 mL | 0.4032 mL | 1.0080 mL | |
| 80 mM | 0.0302 mL | 0.1512 mL | 0.3024 mL | 0.7560 mL | |
| 100 mM | 0.0242 mL | 0.1210 mL | 0.2419 mL | 0.6048 mL |
* Note: If you choose water as the stock solution, please dilute it to the working solution, then filter and sterilize it with a 0.22 μm filter before use.