KRN5
Based on 3 publication(s) in Google Scholar
KRN5, a derivative of KRN2, is an oral active Nuclear factor of activated T cells 5 (NFAT5) suppressor, with an IC50 of 750 nM. KRN5 has potential to treat NFAT5-mediated Chronic Arthritis.
연구목적의 판매만을 진행합니다. 환자를 대상으로 한 판매는 하지 않습니다.
- Purity : 98.58%
- CAS No.: 1800465-47-7
- 화학식: C27H22FNO5
- 분자량:459.47
-
보관:Powder -20°C, 3 years , 4°C, 2 years ; In solvent -80°C, 6 months , -20°C, 1 month
To place orders, for customer services and technical support, please contact: MedChemExpress USA
Tel: 609-228-6898 E-mail: [email protected] [email protected]
-
Biological Activity
-
Chemical Information
-
용액&용해도
- Protocol
- 순도&문서
- References
-
Help & FAQs
-
HY-13259
MG-132Proteasome Inhibitor -
HY-P1026
NFAT Inhibitor-1NFAT Inhibitor -
HY-112125A
KRN2 bromideNFAT5 Inhibitor -
HY-108544
INCA-6NFAT Inhibitor -
HY-108544R
INCA-6 (Standard)Reference Standard -
HY-W019721
Cyclosporin DImmunosuppressant -
HY-126030
(+)-SyringaresinolNFAT Transcription Factor Inhibitor -
HY-W019721R
Cyclosporin D (Standard)Immunosuppressant
Publications Citing Use of MedChemExpress (MCE) KRN5
More
Biological Activity
제품 설명
IC50 & Target
IC50: 750 nM (NFAT5)[1].
In Vitro
KRN5 is less toxic than BBR as determined by a cytotoxicity assay, hERG K+ channel assay, cytochrome inhibition assay, and liver microsomal metabolic stability test, which makes it a potential drug candidate[1].
KRN5 at a concentration of 1 μM inhibits the expressions of NFAT5, IL-6,MCP-1, and GM-CSF,which are NFAT5 target molecules, in RAW264.7 macrophages stimulated with LPS[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only. Further protocols information, click here.
In Vivo
The concentration of serum anti-type II collagen IgG also significantly decreases in the sera of KRN5-treated mice. TNF-α and IL-6 production by LPS-stimulated splenocytes are significantly lower in KRN5-treated CIA mice than in vehicle-treated mice[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
-
Animal Model:8-week-old DBA/1Jmice immunized with bovine type II collagen[1].
-
Dosage:15 mg/kg and 60 mg/kg.
-
Administration:Orally on alternate days (every other day) for 3 weeks.
-
Result:Dose-dependently mitigated arthritis severity.
Chemical Information
-
CAS No. 1800465-47-7
-
Appearance Solid
-
분자량 459.47
-
화학식 C27H22FNO5
-
Color Light yellow to yellow
-
SMILES
COC1=C(OC)C2=C(C=C1)C(CC3=CC=CC=C3F)=C4N(C2=O)CCC(C4=C5)=CC6=C5OCO6
-
선적
Room temperature in continental US; may vary elsewhere.
-
보관
Powder -20°C 3 years 4°C 2 years In solvent -80°C 6 months -20°C 1 month
Publications (3)
-
Journal Impact Factor
-
Most Recent
-
Commun Biol
Wnt11 mediates fibroblast-smooth muscle cell interaction to promote neurogenic bladder fibrosis in rats. [Abstract]2026 Feb 9;9(1):194. PMID: 41663583 -
Cell Signal
Targeting NFAT5 attenuates high sodium-induced vascular aging by re-sensitizing senescent smooth muscle cells to apoptosis. [Abstract]2026 Oct:146:112641. PMID: 42248278 -
Microbiol Spectr
2023 Aug 17;11(4):e0011723. PMID: 37227295
용액&용해도
In Vitro:
DMSO : 5 mg/mL (10.88 mM; ultrasonic and warming and heat to 80°C; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
Concentration (start) × Volume (start) = Concentration (final) × Volume (final)
In Vivo:
Select the appropriate dissolution method based on your experimental animal and administration route.
- For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
- To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for In Vivo experiments, it is recommended to prepare freshly and use it on the same day.
- The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
Solubility: 0.5 mg/mL (1.09 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 0.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
Solubility: 0.5 mg/mL (1.09 mM); Suspended solution; Need ultrasonic
This protocol yields a suspended solution of 0.5 mg/mL. Suspended solution can be used for oral and intraperitoneal injection.
Taking 1 mL working solution as an example, add 100 μL DMSO stock solution (5.0 mg/mL) to 900 μL 20% SBE-β-CD in Saline, and mix evenly.
Preparation of 20% SBE-β-CD in Saline (4°C, storage for one week): 2 g SBE-β-CD powder is dissolved in 10 mL Saline, completely dissolve until clear.
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
-
-
-
-
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
-
%DMSO +
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
-
%+
-
+%Tween-80 + +
-
%Saline +
The co-solvents required include: DMSO, . All of co-solvents are available by MedChemExpress (MCE). , Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Working solution concentration: 0.22 mg/mL
Method for preparing stock solution: mg drug dissolved in μL DMSO. Stock solution concentration: mg/mL.
1. Take μL DMSO stock solution;
2. Add μL .
μL , mix evenly;
3. Then add μL Tween 80, mix evenly;
4. Then add μL
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
Protocol
-
Collagen-Induced Arthritis
Collagen-induced arthritis (CIA) is an autoimmune murine model of rheumatoid arthritis in which immunization with type II collagen (CII) emulsified in an adjuvant induces a T cell- and autoantibody-driven inflammatory arthritis characterized by synovial hyperplasia, immune cell infiltration, and joint destruction. The model typically relies on genetically susceptible mouse strains (e. g. , DBA/1) and reproduces key features of human rheumatoid arthritis, including anti-collagen immune responses and progressive joint inflammation. Disease onset generally occurs within ~3-4 weeks after immunization, depending on antigen/adjuvant combinations and protocol variation. The immunopathology is driven by adaptive immune activation against CII, leading to systemic and local joint inflammation mediated by pro-inflammatory cytokines and effector immune cells, making CIA a standard preclinical platform for evaluating immunomodulatory and anti-arthritic interventions.
-
Cell Cytotoxicity Assay
Cytotoxicity assays are usually based on the assessment of cell membrane damage, which can also be indirectly detected by measuring cell viability. Detection methods include MTT assay, CKK-8 assay, LDH assay and ATP assay, etc.
순도&문서
-
Data Sheet (283 KB)
-
SDS (251 KB)
- English - EN (251 KB)
- Français - FR (251 KB)
- Deutsch - DE (251 KB)
- Norwegian - NO (251 KB)
- Español - ES (251 KB)
- Swedish - SV (251 KB)
- Italian - IT (251 KB)
- Korean - KR (251 KB)
- Portuguese - PT (251 KB)
-
Handling Instructions (2659 KB)
References
Complete Stock Solution Preparation Table
Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles.
Storage method and period of stock solution: -80°C, 6 months; -20°C, 1 month. When stored at -80°C, please use it within 6 months. When stored at -20°C, please use it within 1 month.
| Optional Solvent | Concentration Solvent Mass | 1 mg | 5 mg | 10 mg | 25 mg |
|---|---|---|---|---|---|
| DMSO | 1 mM | 2.1764 mL | 10.8821 mL | 21.7642 mL | 54.4105 mL |
| 5 mM | 0.4353 mL | 2.1764 mL | 4.3528 mL | 10.8821 mL | |
| 10 mM | 0.2176 mL | 1.0882 mL | 2.1764 mL | 5.4411 mL |
KRN5 Related Classifications
HY-112126 Related Classifications
Powered by Bioz